Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
A nondestructive measurement method based on an Optical frequency domain reflectometry (OFDR) was demonstrated to achieve Young's modulus of an optical fiber. Such a method can be used to measure, not only the averaged Young's modulus within the measured fiber length, but also Young's modulus distribution along the optical fiber axis. Moreover, the standard deviation of the measured Young's modulus is calculated to analyze the measurement error. Young's modulus distribution of the coated and uncoated single mode fiber (SMF) samples was successfully measured along the optical fiber axis. The average Young's modulus of the coated and uncoated SMF samples was 13.75 ± 0.14, and 71.63 ± 0.43 Gpa, respectively, within the measured fiber length of 500 mm. The measured Young's modulus distribution along the optical fiber axis could be used to analyze the damage degree of the fiber, which is very useful to nondestructively estimate the service life of optical fiber sensors immersed into smart engineer structures.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8878550 | PMC |
| http://dx.doi.org/10.3390/s22041450 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Measuring multisubunit mechanics of geometrically programmed colloidal assemblies via cryo-EM multi-body refinement.
Proc Natl Acad Sci U S A
September 2025
Martin A. Fisher School of Physics, Brandeis University, Waltham, MA 02453.
Programmable self-assembly has recently enabled the creation of complex structures through precise control of the interparticle interactions and the particle geometries. Targeting ever more structurally complex, dynamic, and functional assemblies necessitates going beyond the design of the structure itself, to the measurement and control of the local flexibility of the intersubunit connections and its impact on the collective mechanics of the entire assembly. In this study, we demonstrate a method to infer the mechanical properties of multisubunit assemblies using cryogenic electron microscopy (cryo-EM) and RELION's multi-body refinement.
View Article and Find Full Text PDFEffect of pH and Particle Charge on the Interfacial Properties of Biocatalytic Pickering Emulsions─Where Are the Enzymes Located?
Langmuir
September 2025
Process Engineering in Life Science Engineering, HTW Berlin, Wilhelminenhofstraße 75 A, 12459 Berlin, Germany.
Pickering emulsions (PEs), where water-in-oil (w/o) droplets are stabilized by nanoparticles (NPs), offer a promising platform for biocatalysis by providing a large interfacial area crucial for efficient substrate conversion. While several lipase catalyzed reactions in PEs have been demonstrated, the exact interfacial structure is unknown. This study focuses on the interfacial network formed by NPs and lipase (CRL) at the octanol/water-interface by varying pH and NP charge.
View Article and Find Full Text PDF[Stiffness of scleral fibroblasts and extracellular matrix remodeling in models of cellular senescence].
Zhonghua Yan Ke Za Zhi
September 2025
Department of Ophthalmology, The Third Xiangya Hospital, Central South University, Changsha 410013, China.
To explore the effects of aging on the stiffness of human scleral fibroblast (HSF) and the remodeling of the extracellular matrix. This experimental study was conducted from January 2022 to June 2024. HSFs were cultured, and after cell passage, β-galactosidase staining was conducted.
View Article and Find Full Text PDFWater resistance and hydration mechanism of phosphogypsum cemented paste backfill under composite curing agent modification.
Environ Res
September 2025
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China; Key Laboratory of Safe and Green Mining of Metal Mines with Cemented Paste Backfill, National Mine Safety Administration, University of Science and Technology Beijing, Beijing 100083, Chi
Cemented paste backfill has made outstanding contributions to the large-scale consumption of phosphogypsum (PG), but poor water resistance significantly weakens the mechanical strength, promotes the leaching of total soluble phosphate (TP) and fluoride ions (F), and reduces its attractiveness in mine engineering. This research synthesized a curing agent (CA) using sodium methylsilicate, sodium silicate, and polyaluminum chloride (PAC). PG produced from Deyang Haohua Qingping Phosphate Mine Co.
View Article and Find Full Text PDFStrain-induced instabilities of graphene under biaxial stress.
J Chem Phys
September 2025
Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), Campus de Cantoblanco, 28049 Madrid, Spain.
The mechanical properties of graphene are investigated using classical molecular dynamics simulations as a function of temperature T and external stress τ. The elastic response is characterized by calculating elastic constants via three complementary methods: (i) numerical derivatives of stress-strain curves, (ii) analysis of cell fluctuation correlations, and (iii) phonon dispersion analysis. Simulations were performed with two interatomic models: an empirical potential and a tight-binding electronic Hamiltonian.
View Article and Find Full Text PDF