A Spiro-MeOTAD/GaO/Si p-i-n Junction Featuring Enhanced Self-Powered Solar-Blind Sensing via Balancing Absorption of Photons and Separation of Photogenerated Carriers.

ACS Appl Mater Interfaces

Laboratory of Information Functional Materials and Devices, School of Science & State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876, China.

Published: December 2021


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Solar blind ultraviolet (SBUV) self-powered photodetectors (PDs) have a great number of applications in civil and military exploration. GaO is a prospective candidate for SBUV detection owing to its reasonable bandgap corresponding to the SBUV waveband. Nevertheless, the previously reported GaO photovoltaic devices had low photoresponse performance and were still far from the demands of practical application. Herein, we propose an idea of using spiro-MeOTAD (spiro) as the SBUV transparent conductive layer to construct p-i-n PDs (p-spiro/GaO/n-Si). With the aid of double built-in electric fields, the designed p-i-n PDs could operate without any external power source. Furtherly, the influence of spiro thickness on improving the photoelectric performance of devices is investigated in detail and the optimum device is achieved, translating to a peak responsivity of 192 mA/W upon a weak 254 nm light illumination of 2 μW/cm at zero bias. In addition, the - curve of our PD shows binary response characteristics and a four-stage current response behavior under a small forward bias, and also, its underlying working mechanism is analyzed. In sum, this newly developed device presents great potential for booming the high energy-efficient optoelectronic devices in the short run.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.1c18229DOI Listing

Publication Analysis

Top Keywords

p-i-n pds
8
spiro-meotad/gao/si p-i-n
4
p-i-n junction
4
junction featuring
4
featuring enhanced
4
enhanced self-powered
4
self-powered solar-blind
4
solar-blind sensing
4
sensing balancing
4
balancing absorption
4

Similar Publications

Self-Powered High-Performance WS Photodetector via a Monolithic p-i-n Homojunction.

Nano Lett

September 2025

Department of Chemical and Biological Engineering, Seoul National University, Seoul 08826, Republic of Korea.

Lateral homojunction photodetectors (PDs) offer high responsivity and fast response, yet challenges in tailoring carrier concentrations in two-dimensional transition-metal dichalcogenides (TMDs) have limited their implementation. Here, we demonstrate a high-performance self-powered monolithic lateral p-i-n homojunction PD using multilayer WS. To our knowledge, this study is the first report of achieving tunable, multilevel compensation doping via WO formation using only time-controlled and region-selective ultraviolet (UV)/ozone oxidation.

View Article and Find Full Text PDF

In the first part of this study, YO-doped copper thiocyanate (CuSCN) with different x wt% (named CuSCN-xY, x = 0, 1, 2, and 3) films were synthesized onto ITO substrates using the spin coating method. UV-vis, SEM, AFM, EDS, and cyclic voltammetry were used to investigate the material properties of the proposed films. The conductivity and carrier mobility of the films increased with additional yttrium doping.

View Article and Find Full Text PDF

There has been an increasing need for small, low-cost, and low-power consumption optical transceivers for short-reach fiber links. Waveguide-integrated photodetectors (PDs) with wide bandwidth and high responsivity on Si photonics platforms are an essential element for these applications. We have fabricated an O-band membrane PD which is suitable for integration with high-performance III-V-based membrane devices such as lasers and modulators, and passive waveguide circuits on the Si photonics platforms.

View Article and Find Full Text PDF

We present a novel photon-acid diffusion method to integrate polymer microlenses (MLs) on a four-channel, high-speed photo-receiver consisting of normal-incidence germanium (Ge) p-i-n photodiodes (PDs) fabricated on a 200 mm Si substrate. For a 29 µm diameter PD capped with a 54 µm diameter ML, its dark current, responsivity, 3 dB bandwidth (BW), and effective aperture size at -3 V bias and 850 nm wavelength are measured to be 138 nA, 0.6 A/W, 21.

View Article and Find Full Text PDF

This paper presents the test results for high-performance and high-uniformity waveguide silicon-based germanium (Ge) photodetectors (PDs) for the band and band. Both wafer-scale and chip-scale test results are provided. The fabricated lateral -- (LPIN) PDs exhibit a responsivity of 0.

View Article and Find Full Text PDF