Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Refractory high-entropy alloys (RHEAs) are designed for high elevated-temperature strength, with both edge and screw dislocations playing an important role for plastic deformation. However, they can also display a significant energetic driving force for chemical short-range ordering (SRO). Here, we investigate mechanisms underlying the mobilities of screw and edge dislocations in the body-centered cubic MoNbTaW RHEA over a wide temperature range using extensive molecular dynamics simulations based on a highly-accurate machine-learning interatomic potential. Further, we specifically evaluate how these mechanisms are affected by the presence of SRO. The mobility of edge dislocations is found to be enhanced by the presence of SRO, whereas the rate of double-kink nucleation in the motion of screw dislocations is reduced, although this influence of SRO appears to be attenuated at increasing temperature. Independent of the presence of SRO, a cross-slip locking mechanism is observed for the motion of screws, which provides for extra strengthening for refractory high-entropy alloy system.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8357793PMC
http://dx.doi.org/10.1038/s41467-021-25134-0DOI Listing

Publication Analysis

Top Keywords

refractory high-entropy
12
presence sro
12
high-entropy alloys
8
chemical short-range
8
screw dislocations
8
edge dislocations
8
sro
5
atomistic simulations
4
simulations dislocation
4
dislocation mobility
4

Similar Publications

Refractory high-entropy alloys (HEAs) are promising candidates for next-generation nuclear applications, particularly fusion reactors, due to their excellent high-temperature mechanical properties and irradiation resistance. Here, the microstructure and mechanical behavior were investigated for an equimolar WTaTiVZr HEA, designed from a palette of low-activation elements. The as-cast alloy exhibited a dendritic microstructure composed of W-Ta rich dendrites and Zr-Ti-V rich inter-dendritic regions, both possessing a body-centered cubic (BCC) crystal structure.

View Article and Find Full Text PDF

Accelerated Discovery of Refractory High-Entropy Alloys via Interpretable Machine Learning.

J Phys Chem Lett

August 2025

College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325035, China.

Due to the outstanding thermal stability, inherent high melting points, and elevated temperature strengths, refractory high-entropy alloys (RHEAs) have been widely used for extreme environments in aerospace, nuclear energy, and advanced propulsion systems. Herein, we present an integrated design and simulation framework for RHEAs, combining machine learning potentials, supervised regression models, and multiobjective optimization algorithms. Utilizing a universal neuroevolution potential version 1 (UNEP-v1), the framework significantly enhances the accuracy of atomic-scale simulation while substantially reducing computational cost.

View Article and Find Full Text PDF

The conventional manufacturing of refractory complex concentrated alloys (RCCAs) for high-temperature applications is complicated, particularly when material costs and high melting points of the materials processed are considered. Additive manufacturing (AM) could provide an effective alternative. However, the extreme temperatures involved represent significant challenges for manufacturing defect-free alloys using this approach.

View Article and Find Full Text PDF

To enhance the mechanical properties of NbMoTaW refractory high-entropy alloys (RHEAs), Si was added at varying concentrations ( = 0, 0.25, and 0.5) via vacuum induction levitation melting (re-melted six times for homogeneity).

View Article and Find Full Text PDF

Aqueous zinc-ion batteries offer sustainable large-scale storage potential with inherent safety and low cost, yet suffer from limited energy density and cycle life due to aqueous electrolyte constraints. Here, we introduce affordable, stable electrolyte (0.33 $·kg) incorporating minimal multi-halogen anions (Cl, Br, and I) to create a high-entropy solvation structure enabling high-performance zinc batteries.

View Article and Find Full Text PDF