Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Papermaking raw materials are usually digested by NaOH and NaS solution. The fate of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) during the kraft pulping process is still poorly known. In this study, a comprehensive investigation was conducted on the variation in PCDD/Fs in the kraft pulping section of 3 modern non-wood pulp mills adopting elemental chlorine-free (ECF) bleaching technology. Similar dioxin homologue profiles, dominated by ClDF and ClDD homologues, were observed in the raw materials, black liquors and brown pulps; and the partitioning behaviors of dioxin congeners between black liquor and brown pulp were found to be partly dependent on their octanol-water partitioning coefficients. Dioxin mass flow analysis indicated that the raw materials contributed more than 95 % to the dioxins entering the pulping section. Approximately 7 - 30 % of the input dioxins were exported by black liquor, and the brown pulp carried 44 - 51 % of the input dioxins into the subsequent bleaching section. The kraft pulping process caused a 40 - 48 % reduction in input dioxins. Alkaline hydrolysis and coupling reaction between dioxins and the aromatic fragments of lignin were proposed as two most possible mechanisms for dioxin elimination. In general, modern pulp mills have actually become industrial plants that eliminate environmental dioxins.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2020.122819DOI Listing

Publication Analysis

Top Keywords

kraft pulping
16
pcdd/fs kraft
12
pulping process
12
raw materials
12
input dioxins
12
polychlorinated dibenzo-p-dioxins
8
dibenzo-p-dioxins dibenzofurans
8
dibenzofurans pcdd/fs
8
pulp mills
8
black liquor
8

Similar Publications

Alkaline pretreatment wastewater from lignocellulosic biomass: challenges and emerging management strategies.

Environ Sci Pollut Res Int

September 2025

Cavitation and Mechanochemistry Lab, Department of Chemical Engineering & Process Technology, CSIR-Indian Institute of Chemical Technology, Hyderabad, India.

Alkaline pretreatment is the most widely employed chemical process for lignocellulosic biomass, particularly at an industrial scale. However, this method generates a significant volume of complex wastewater, which contains recalcitrant organic molecules, high concentrations of biopolymers, and hazardous chemicals. These waste streams have been largely overlooked, with conventional disposal methods, such as incineration in recovery boilers, posing serious environmental and resource inefficiency concerns.

View Article and Find Full Text PDF

The development of sustainable and non-toxic ultraviolet (UV) shielding materials is essential to address the limitations of conventional inorganic agents, which often suffer from biotoxicity and limited spectral coverage. In this study, lignin nanoparticles (LNPs) were extracted from rice straw-derived black liquors, a by-product of various pulping processes, using acid precipitation followed by solvent exchange with tetrahydrofuran (THF) and ethylene glycol (EG). These LNPs were incorporated into nanocrystalline cellulose (CNC) matrices to fabricate bio-based UV-shielding nanocomposites.

View Article and Find Full Text PDF

Kraft black liquor is considered a renewable feedstock for value-added compounds such as lignin and phenols, which should be valorized rather than incinerated for energy production. Herein, Robinia pseudoacacia L. was subjected to Kraft pulping and the resulting black liquor was recovered for lignin and phenols extraction.

View Article and Find Full Text PDF

Processive Endoglucanase EG1 Treatment Improved the Physical Strength of Bleached Pulps and Reduced Vessel Picking in Pulp.

Polymers (Basel)

June 2025

Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, Jiangsu Provincial Key Lab Pulp & Paper Science and Technology, Nanjing Forestry University, Nanjing 210037, China.

endoglucanase EG1 was used to treat bleached softwood kraft pulp (BSKP) and hardwood pulp (BHKP) to improve the refinability and physical strength, as well as to reduce vessel picking in pulp. The results indicated that BSKP was treated with an enzyme dosage of 3 U/g for 2 h at 12,000 refining revolutions, which increased the tensile index from 71.4 N·m/g to 86.

View Article and Find Full Text PDF

This research explores the use of kraft lignin (KL), derived from pulping black liquor waste, as a supportive medium for AgPO@ZnO (AZ-NC) p-n heterojunction and design a new cost-effective ternary KL-AgPO@ZnO nanocomposite (AZKL). The aim is to improve its photocatalytic efficiency in treating textile wastewater while tackling environmental issues such as chemical stability, charge carrier separation, and the production of secondary waste during the photocatalytic process. The response surface methodology (RSM) analysis shows that AZKL is highly effective catalyst for methylene blue (MB: 10 - 25 mg/L) dye mineralization, achieving a rapid decolorization (> 98.

View Article and Find Full Text PDF