Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

There is an increased interest on changing the synthetic based materials to biodegradable ones, especially with natural polymers, polysaccharides or proteins. In this research we prepared bio-nanocomposite formulations with different component concentrations and investigated their structural features, with focus on the interactions, sorption properties, and how the combination between them influences these properties. By infrared spectroscopy, principal component analysis (PCA) and two-dimensional correlation spectroscopy (2DCOS) was identified that in the blending process are involved the -SO and C(4)-O-S groups of β-d-galactose, CO groups, (O=S=O) of carrageenan and -OH and CO groups from CNCs. The water uptake and water sorption properties decrease with increasing the CNCs content in the formulations from about 15% for κ to 10% for κC15 and from about 128% for κ to 115% for κC15, respectively. The increase of the CNCs content induced an increase of the water contact angle from 47° for κ to 90° for κC15, indicating once again the involvement of the free hydroxyl groups in the hydrogen bonded interactions.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ijbiomac.2019.05.194DOI Listing

Publication Analysis

Top Keywords

sorption properties
12
cncs content
8
structural sorption
4
properties
4
properties bio-nanocomposite
4
bio-nanocomposite films
4
films based
4
based κ-carrageenan
4
κ-carrageenan cellulose
4
cellulose nanocrystals
4

Similar Publications

Silica-coating-mediated depassivation of nanosized zero-valent iron by Fe(II) at circumneutral pH.

Water Res

September 2025

Department of Civil and Environmental Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan 46241, Republic of Korea. Electronic address:

Surface passivation of materials based on nanosized zero-valent iron (nZVI) limits the reductive reactivities of such materials at near-neutral pH. To overcome this, a reactivation strategy was developed involving adding aqueous Fe(II) to a silica-coated nZVI (nZVI@SiO) system, which markedly increased the nitrobenzene reduction efficiency. The Fe(0) core in nZVI@SiO acted as the main reductant, and Fe(II) sorbed to the SiO coating acted as a reactivating agent that facilitated electron conduction mainly through the 'chemi-conductor' mechanism.

View Article and Find Full Text PDF

Membrane technology for gas separation is more efficient and energy-saving than thermally driven processes, including cryogenic distillation and adsorption. Metal-organic framework (MOF) and related glass membranes hold great potential for precise gas separation, but it remains challenging to construct ultrathin MOF glass membranes and optimize their transport pathways. In this study, a strategy based on vapor-linker deposition and melt-quenching is reported to design ultrathin zeolitic imidazolate framework (ZIF) glass membranes with node-missing defect passageways.

View Article and Find Full Text PDF

Two series of robust pillared metal-organic frameworks (MOFs) are obtained under solvothermal conditions by combining a metal salt with either Hbpdc, biphenyl-4,4'-dicarboxylic acid, or Hpda, 1,4-phenylenediacrylic acid, forming 2D layers, which are pillared by L, an alloxazine derivative of 1,4-di(pyridin-4-yl)benzene using a one-pot three-component strategy. Crystallographic studies reveal the formation of two isomorphous series of compounds, namely 1-M (from Hbpdc with M = Co, Ni, Cu, and Zn) and 2-M (from Hpda with M = Co or Cu). The multifunctional compounds have high decomposition temperatures, and their sorption properties were measured, revealing relatively low surface areas.

View Article and Find Full Text PDF

Development of effective, safe, and degradable food packaging is essential to meet the demands of consumers and to ensure the continued growth of the food industry. In this study, superabsorbent bioactive aerogels based on cellulose and polyvinyl alcohol combined with the antibacterial bioactive extracts extracted from Portulaca oleracea were fabricated for the preservation of chilled meats. The main physicochemical and mechanical properties of the bioactive aerogels were characterized and evaluated.

View Article and Find Full Text PDF

Developing efficient, low-cost catalysts for oxygen reduction and evolution reactions (ORR and OER) is key to advancing metal-air batteries and regenerative fuel cells. In this study, nitrogen-doped binary metal (Mn and Ni) oxides (N-BMOs) and Pt-decorated N-BMOs were synthesised using three methods and tested as ORR and OER catalysts in alkaline media. Their physicochemical properties were characterised by XRD, N-sorption, TEM, and XPS, while their electrochemical performance was evaluated using voltammetry and impedance spectroscopy.

View Article and Find Full Text PDF