98%
921
2 minutes
20
Graphene oxide (GO) has been indicated to be biotoxic and risky in environment, its environmental behavior thus has received increasing attention in recent. In this study, homogeneous and heterogeneous sand tanks were used to examine the transport behaviors of GO nanoparticles in two-dimensional (2-D) porous media under various conditions. Light transmission visualization (LTV) technology was applied to visualize the real-time transport, retention, and release of GO. GO transport in 2-D porous media was simulated with a simplified Double Monod model. GO mobility decreased with the increasing solution ionic strength (IS) and decreasing media grain size. Preferential flow played an important role in GO transport in 2-D heterogeneous porous media. Even without vertical flow in the sand tanks, GO still spread vertically through dispersion, suggesting the importance of the dispersion process to nanoparticle fate and transport in 2-D porous media. LTV images and breakthrough curves showed that some of the previous retained GO particles were instantaneously remobilized with IS decreasing. With the consideration of the vertical dispersion, simulations of the Double Monod model matched the experimental data well. Findings from this work contribute to expand current knowledge of environmental fate and transport of GO, leading to better assessment and prediction of its environmental risks.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2019.02.042 | DOI Listing |
ACS Appl Mater Interfaces
September 2025
Department of Chemistry, University of Wisconsin-Madison, 1101 University Ave., Madison, Wisconsin 53706, United States.
Slippery liquid-infused porous surfaces (or "SLIPS") can prevent bacterial surface fouling, but they do not inherently possess the means to kill bacteria or reduce cell loads in surrounding media. Past reports show that the infused liquids in these materials can be leveraged to load and release antimicrobial agents, but these approaches are generally limited to the use of hydrophobic agents that are soluble in the infused oily phases. Here, we report the design of so-called "proto-SLIPS" that address this limitation and permit the release of highly water-soluble (or oil-insoluble) agents.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
Instituto de Cerámica y Vidrio (ICV-CSIC), C/Kelsen 5, 28049 Madrid, Spain.
The oxygen reduction reaction (ORR) is critical to energy conversion technologies and requires efficient catalysts for superior performance. Herein, nitrogen-doped carbide-derived carbon (N-CDC) catalysts are prepared using novel engineered molecular architectures based on polymer-derived ceramic technology. The obtained catalyst materials show a surface N concentration of >5 wt % and a hierarchically porous structure, resulting in a specific surface area of over 2000 m g.
View Article and Find Full Text PDFSnS (tin disulfide) is a promising anode active material for lithium-ion batteries (LIBs) due to its high theoretical capacity and low material cost. Conventional synthesis methods, such as solvothermal, hydrothermal, and solid-state, require long synthesis times, the use of solvents and surfactants, and several separation steps. However, the preparation of coated SnS composites using liquid media is even more complex, requiring suitable precursors, compatible solvents, and potentially several steps.
View Article and Find Full Text PDFLangmuir
September 2025
Key Laboratory of Green Chemical Media and Reactions (Ministry of Education), Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, School of Chemistry and Chemical Engineering, Henan Normal University, Xinxiang, Henan 453007, P. R. China.
Recent years have witnessed growing research interest in proton-conducting metal-organic frameworks (MOFs) owing to the characteristics of highly ordered pores, oriented packing of crystals, and particularly designable structures. However, how to construct a suitable microenvironment in MOF pores to form optimal proton transport pathways remains challenging. In this study, four MOFs with similar porous diameters but different microenvironments have been screened to study how porous environments influence proton conduction for the first time.
View Article and Find Full Text PDFVertical cutoff wall is widely used as one of the in-situ remediation technologies for contaminated sites. In this paper, considering the unsaturated characteristics of porous media, a three-dimensional pollutant transport model of inner aquifer-vertical cutoff wall-outer aquifer is established. The main conclusions are as follows.
View Article and Find Full Text PDF