98%
921
2 minutes
20
Obtaining new nanocomposites with sorption properties towards chromium is highly important not only from the environmental point of view but also for developing eco-friendly methods of chromium determination. The potential use of aluminum oxide-coated nano-graphite (AlO/nano-G) as a new nanosorbent in ultrasound-assisted dispersive micro-solid-phase extraction (DMSPE) for rapid speciation of trace chromium(III) and chromium(VI) ions in natural water was evaluated. In the developed method, the crucial issue is the new nanocomposite synthesized by coating alumina on a nano-graphite surface with sorption properties. Structural researches of the nanocomposite were carried out by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), and Raman spectroscopy. Maximum adsorption capacity of AlO/nano-G towards Cr(III) was 32.8 mg g. The influence of the method's factors like pH, sample volumes, contact time, coexisting ions, and humic acid on the recovery of chromium was examined. The nanocomposites have been found to be stable and effective as a sorbent in water with high concentrations of selected cations and anions present in water as well as in water of various pH. AlO/nano-G is selective for Cr(III) in presence of Cr(VI). Cr(III) was determined by the developed method, total Cr after reduction of Cr(VI) to Cr(III), and Cr(VI) was calculated as the difference between total Cr and Cr(III). After sorption, the nanocomposite with chromium was collected on 5-mm diameter filters and analyzed by energy-dispersive X-ray fluorescence spectrometry (EDXRF) to determine the chromium concentration. The method was characterized by correlation coefficient 0.999, limit of detection (LOD) 0.04 ng mL, and relative standard deviation (RSD) 3.5%. AlO/nano-G combined with proposed DMSPE/EDXRF was verified by analysis of certificate reference material of natural water (NIST 1640a). Graphical abstract ᅟ.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6244755 | PMC |
http://dx.doi.org/10.1007/s00216-018-1397-8 | DOI Listing |
Water Res
September 2025
Department of Civil and Environmental Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan 46241, Republic of Korea. Electronic address:
Surface passivation of materials based on nanosized zero-valent iron (nZVI) limits the reductive reactivities of such materials at near-neutral pH. To overcome this, a reactivation strategy was developed involving adding aqueous Fe(II) to a silica-coated nZVI (nZVI@SiO) system, which markedly increased the nitrobenzene reduction efficiency. The Fe(0) core in nZVI@SiO acted as the main reductant, and Fe(II) sorbed to the SiO coating acted as a reactivating agent that facilitated electron conduction mainly through the 'chemi-conductor' mechanism.
View Article and Find Full Text PDFSmall
September 2025
College of Environment and Climate, Jinan University, Guangzhou, 511443, China.
Membrane technology for gas separation is more efficient and energy-saving than thermally driven processes, including cryogenic distillation and adsorption. Metal-organic framework (MOF) and related glass membranes hold great potential for precise gas separation, but it remains challenging to construct ultrathin MOF glass membranes and optimize their transport pathways. In this study, a strategy based on vapor-linker deposition and melt-quenching is reported to design ultrathin zeolitic imidazolate framework (ZIF) glass membranes with node-missing defect passageways.
View Article and Find Full Text PDFChemistryOpen
September 2025
CMC UMR 7140, CNRS, Université de Strasbourg, Strasbourg, F-67000, France.
Two series of robust pillared metal-organic frameworks (MOFs) are obtained under solvothermal conditions by combining a metal salt with either Hbpdc, biphenyl-4,4'-dicarboxylic acid, or Hpda, 1,4-phenylenediacrylic acid, forming 2D layers, which are pillared by L, an alloxazine derivative of 1,4-di(pyridin-4-yl)benzene using a one-pot three-component strategy. Crystallographic studies reveal the formation of two isomorphous series of compounds, namely 1-M (from Hbpdc with M = Co, Ni, Cu, and Zn) and 2-M (from Hpda with M = Co or Cu). The multifunctional compounds have high decomposition temperatures, and their sorption properties were measured, revealing relatively low surface areas.
View Article and Find Full Text PDFFood Res Int
November 2025
College of Food Science and Engineering, Northwest A&F University, Yangling 712100, Shaanxi, China. Electronic address:
Development of effective, safe, and degradable food packaging is essential to meet the demands of consumers and to ensure the continued growth of the food industry. In this study, superabsorbent bioactive aerogels based on cellulose and polyvinyl alcohol combined with the antibacterial bioactive extracts extracted from Portulaca oleracea were fabricated for the preservation of chilled meats. The main physicochemical and mechanical properties of the bioactive aerogels were characterized and evaluated.
View Article and Find Full Text PDFDalton Trans
September 2025
University of Belgrade, Faculty of Physical Chemistry, Studentski trg 12-16, 11158 Belgrade, Serbia.
Developing efficient, low-cost catalysts for oxygen reduction and evolution reactions (ORR and OER) is key to advancing metal-air batteries and regenerative fuel cells. In this study, nitrogen-doped binary metal (Mn and Ni) oxides (N-BMOs) and Pt-decorated N-BMOs were synthesised using three methods and tested as ORR and OER catalysts in alkaline media. Their physicochemical properties were characterised by XRD, N-sorption, TEM, and XPS, while their electrochemical performance was evaluated using voltammetry and impedance spectroscopy.
View Article and Find Full Text PDF