98%
921
2 minutes
20
Developing micro/nanoscale wire (MNW) lasers with single-mode operation is critical for realizing their practical applications, however, most reported MNW lasers operate in multi-modes, because lacking of mode selection mechanisms. In this work, a simple and direct way to realize stable, single-mode MNW laser without complicated micro/nano-manipulation was demonstrated. We have found and proved that the position of the active region plays a key role in determining the lasing mode of MNW lasers, which can be used to realize single-mode lasing in MNWs. We propose self-selection mechanism of Fabry-Pérot MNW cavity for single-mode lasing due to location-dependent field distribution in MNWs, which is characterized by suppressing the multiple longitudinal mode oscillation of the MNW laser. GaN MNW lasers with different lengths and diameters have been fabricated, verifying the self-selection mechanism of the cavity experimentally. Moreover, we demonstrate the single-mode, room temperature optically pumped MNW laser with an extremely low threshold (~40 kW/cm) in condition of appropriate cavity length, opening an opportunity to realize stable single-mode, low-threshold MNW laser for easy integration in constructing micro/nanoscale photonic and optoelectronic circuits and devices.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.25.021025 | DOI Listing |
Opt Express
September 2017
Developing micro/nanoscale wire (MNW) lasers with single-mode operation is critical for realizing their practical applications, however, most reported MNW lasers operate in multi-modes, because lacking of mode selection mechanisms. In this work, a simple and direct way to realize stable, single-mode MNW laser without complicated micro/nano-manipulation was demonstrated. We have found and proved that the position of the active region plays a key role in determining the lasing mode of MNW lasers, which can be used to realize single-mode lasing in MNWs.
View Article and Find Full Text PDFJ Chem Phys
April 2017
Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, Hsinchu 30010, Taiwan.
We recorded infrared (IR) spectra in the CH- and OH-stretching regions of size-selected clusters of methanol (M) with one water molecule (W), represented as MW, n = 1-4, in a pulsed supersonic jet using the photoionization/IR-depletion technique. Vacuum ultraviolet emission at 118 nm served as the source of ionization in a time-of-flight mass spectrometer to detect clusters MW as protonated forms MWH. The variations in intensities of MWH were monitored as the wavelength of the IR laser light was tuned across the range 2700-3800 cm.
View Article and Find Full Text PDFACS Nano
June 2013
BIOS Lab on a Chip Group and MESA+ Institute for Nanotechnology, University of Twente, Enschede, The Netherlands.
We report a new top-down nanofabrication technology to realize large area metal nanowire (m-NW) arrays with tunable sub-20 nm separation nanogaps without the use of chemical etching or milling of the metal layer. The m-NW array nanofabrication technology is based on a self-regulating metal deposition process that is facilitated by closely spaced and isolated heterogeneous template surfaces that confine the metal deposition into two dimensions, and therefore, electrically isolated parallel arrays of m-NW can be realized with uniform and controllable nanogaps. Au-NW and Ag-NW arrays are presented with high-density ~10(5) NWs cm(-1), variable NW diameters down to ~50 nm, variable nanogaps down to ~5 nm, and very large nanogap length density ~1 km cm(-2).
View Article and Find Full Text PDF