Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

We demonstrate a simple and effective approach to control the diameter of ultrathin ZnO nanowires with high aspect ratios and high densities over large areas. Diblock copolymer-based nanoparticle arrays exhibiting a high degree of hexagonal order and offering easy control of particle size (typically 1-10 nm) and interparticle spacing (25-150 nm) are utilized as nanocatalysts for the subsequent growth of semiconductor nanowires. The as-grown ZnO nanowires exhibit a single crystal hexagonal wurtzite structure and grow along the [0002] direction. Facetted catalyst particles were observed at the tip of the nanowires after synthesis, thus suggesting a catalyst-assisted vapor-solid-solid (VSS) rather than a vapor-liquid-solid (VLS) growth mechanism, the latter being frequently used in semiconductor nanowire production. Such a growth process allows us to easily prepare ultrathin ZnO nanowires with tunable diameters well below 10 nm by taking advantage of the inherent size control of the micellar method during deposition of the catalyst nanoparticles. Raman spectroscopy reveals a phonon confinement effect as the diameter of nanowires decreases. Photoluminescence spectra of these ultrathin nanowires indicate a blue shift of the free excitons and their phonon replicas by 37 meV induced by quantum confinement.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c3nr01938aDOI Listing

Publication Analysis

Top Keywords

zno nanowires
16
ultrathin zno
12
nanowires
8
controlled synthesis
4
ultrathin
4
synthesis ultrathin
4
zno
4
nanowires micellar
4
micellar gold
4
gold nanoparticles
4

Similar Publications

Electrochemical CO reduction reaction (CORR) has emerged as a key negative-emission technology, yet its industrial adoption hinges on cathode catalysts that deliver high selectivity and production rates at low cost. Herein, we reported a facile hydrothermal route to synthesize different scales of ZnOHF ultrathin nanowires with hybridized ZnO/ZnOHF heterointerfaces, where the 40 nm variant (NW-ZnOHF) showed a high FE of 93 % and a of -17.2 mA/cm at -1.

View Article and Find Full Text PDF

In this study we report on the structural, mechanical, and electrical characterization of different structures of vertically aligned zinc oxide (ZnO) nanowires (NWs) synthesized using hydrothermal methods. By optimizing the growth conditions, scanning electron microscopy (SEM) micrographs show that the ZnO NWs could reach an astounding 51.9 ± 0.

View Article and Find Full Text PDF

Universal 3D-Printing of Suspended Metal Oxide Nanowire Arrays on MEMS for AI-Optimized Combinatorial Gas Fingerprinting.

Adv Sci (Weinh)

August 2025

The Greater Bay Area University Joint Laboratory of Micro- and Nanofabrication, Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China.

Additive manufacturing technology has the potential to provide great versatility in the design and fabrication of sensing devices. This prerequisite necessitates further technological improvement in precision and material diversity. Here, a universal meniscus-guided 3D printing method is reported that can fabricate freestanding metal oxide semiconducting nanowires with programmed compositions and compatible substrate options at the single-entity level.

View Article and Find Full Text PDF

High-fidelity intracellular electrophysiological recording of cardiomyocytes is fundamental to cardiac research and drug development, which is still hindered by technical challenges in achieving stable, long-term intracellular access. Here, we introduce a platform based on thermally oxidized ZnO nanowire electrodes (TONEs), which directly integrate nanowires in patterned microelectrodes via scalable thermal oxidation. The three-dimensional nanointerface facilitates minimally invasive electroporation for high-quality intracellular action potential recordings compared with conventional planar electrodes.

View Article and Find Full Text PDF

SF decomposition composition analysis (DCA) is an effective method for identifying partial discharge (PD) fault types in gas-insulated switchgear (GIS). Among various SF decomposition byproducts, the SO concentration exhibits a strong correlation with PD types, making it a key indicator for PD detection. However, detecting SO in an oxygen-free SF environment using semiconductor sensors presents challenges, such as low response values, slow recovery, and poor repeatability.

View Article and Find Full Text PDF