Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

A sequencing batch reactor (SBR) submitted to aerobic dynamic feeding condition was fed with weakly nitrogen-limited substrate (COD/N ratio of 60 mg/mg, propionate as the sole carbon source), and operated at 15 days sludge retention time (SRT). Then, the nitrogen-limited sludges at different cultivating periods (45th, 120th, 195th and 240th days) were harvested to conduct aerobic batch experiments of PHAs production under various nitrogen concentrations. Experimental results indicated that PHAs accumulating behavior of the propionate-fed sludge declined significantly after long-term cultivation, implying that weak nitrogen limitation and long SRT operation cannot achieve a stable PHAs producing performance of the sludge. Supplementing enough nitrogen was consequently a requisite to guarantee the stability of the propionate-fed PHAs accumulating culture. Besides, the sludge with higher PHAs content in SBR did not ensure a better PHAs producing capability in the batch PHAs production phase. Batch experiments also indicated that the propionate-fed sludge with 0.7 N mmol/L exhibited a better PHAs producing capability than with other nitrogen concentrations.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11274-012-1121-3DOI Listing

Publication Analysis

Top Keywords

phas producing
12
weak nitrogen
8
nitrogen limitation
8
sludge retention
8
retention time
8
batch experiments
8
phas
8
phas production
8
nitrogen concentrations
8
phas accumulating
8

Similar Publications

Polyhydroxyalkanoates (PHAs), biodegradable biopolyesters produced by bacteria, offer an eco-friendly alternative to synthetic plastics. However, current methods of recovering intracellular PHA require complex cell lysis steps, which contribute to high production costs. In this study, we developed a novel approach for efficient PHA recovery by engineering an autolytic strain of using the lytic gene system from lambda (λ) phage.

View Article and Find Full Text PDF

Polyhydroxyalkanoate (PHA) is a biopolymer that can be 3D printed using the material extrusion method. Nevertheless, their mechanical properties are inferior to those of petroleum-derived polymers, which restricts their broader application. Herein, nanobiocomposites comprising naturally sourced PHA and cellulose nanocrystals (CNC) as fillers were successfully synthesized.

View Article and Find Full Text PDF

Poly(3-hydroxyoctanoate) (PHO) is a medium-chain-length PHA with low crystallinity and high elongation to break ratio, unlike the brittle short-chain-PHAs like PHB. These properties make PHO a promising candidate for industrial and biomedical applications. In this study, we demonstrated the production of PHO in Escherichia coli from a renewable and inexpensive glycerol feedstock by engineering fatty acid synthesis and β-oxidation to create a pool of 2,3-octenoyl-CoAs.

View Article and Find Full Text PDF

Strategies for Designing Circular, Sustainable, and Nonpersistent Consumer Plastic Products: A Case Study of Drinking Straws.

Environ Sci Technol

September 2025

Department of Marine Chemistry and Geochemistry, Woods Hole Oceanographic Institution (WHOI), Woods Hole, Massachusetts 02543, United States.

Drinking straws present a simple form factor for evaluating material design strategies taken by manufacturers to achieve circular, sustainable, and nonpersistent products in response to global restrictions and consumer sentiment. We investigated 13 on-the-market drinking straws of varying formulations, characterizing their physical, chemical, and marine biodegradation properties. These data informed sustainability metrics used for evaluating the effectiveness and trade-offs of design strategies, ultimately arriving at four key conclusions.

View Article and Find Full Text PDF

Retainment of Poly(3-hydroxybutyrate--3-hydroxyhexanoate) Properties from Oil-Fermented Using Additional Ethanol-Based Defatting Process.

Polymers (Basel)

July 2025

Advanced Materials Program, Department of Biological Engineering, College of Engineering, Konkuk University, Hwayang-dong, Gwangjin-gu, Seoul 05029, Republic of Korea.

Engineering of could enable the production of various polyhydroxyalkanoates (PHAs); particularly, poly(3-hydroxybutyrate--3-hydroxyhexanoate) (P(3HB--3HH)), a biopolymer with enhanced mechanical and thermal properties compared to poly(3-hydroxybutyrate) (PHB), can be efficiently produced from vegetable oils. However, challenges remain in the recovery process, particularly in removing residual oil and minimizing degradation of the polymer structure during extraction steps. This study investigated the effects of ethanol-based defatting on the recovery and polymeric properties of P(3HB--3HH).

View Article and Find Full Text PDF