[Modeling formation of aerobic granule and influence of hydrodynamic shear forces on granule diameter].

Huan Jing Ke Xue

Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environment, Dalian University of Technology, Dalian 116024, China.

Published: January 2012


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

A one-dimension aerobic granule mathematical model was established, basing on mathematical biofilm model and activated sludge model. The model was used to simulate simple aerobic granule process such as nutrients removal, granule diameter evolution, cycle performance as well as depth profiles of DO and biomass. The effluent NH4(+) -N concentration decreased as the modeling processed. The simulation effluent NO3(-)-N concentration decreased to 3 mg x L(-1) as the granules grew. While the granule diameter increased from 1.1 mm on day 30 to 2.5 mm on day 100, the TN removal efficiency increased from less than 10% to 91%. The denitrification capacity was believed to enhance because the anoxic zone would be enlarged with the increasing granule diameter. The simultaneous nitrification and denitrification occurred inside the big aerobic granules. The oxygen permeating depth increased with the consumption of substrate. It was about 100-200 microm at the beginning of the aeration phase, and it turned to near 800 microm at the end of reaction. The autotrophs (AOB and NOB) were mostly located at the out layer where the DO concentration was high. The heterotrophic bacteria were distributed through the whole granule. As hydrodynamic shear coefficient k(de) increased from 0.25 (m x d)(-1) to 5 (m x d)(-1), the granule diameter under steady state decreased form 3.5 mm to 1.8 mm. The granule size under the dynamic steady-state decreased with the increasing hydrodynamic shear force. The granule size could be controlled by adjusting aeration intensity.

Download full-text PDF

Source

Publication Analysis

Top Keywords

granule diameter
16
aerobic granule
12
hydrodynamic shear
12
granule
11
concentration decreased
8
granule size
8
[modeling formation
4
aerobic
4
formation aerobic
4
granule influence
4

Similar Publications

A dual-cavity lasing platform is reported in which thioflavin T (ThT), a rotor-sensitive molecular probe, is employed to map molecular-crowding effects within starch granules via coupled Fabry-Perot (FP) and whispering gallery mode (WGM) resonances. In this architecture, global standing-wave feedback is furnished by a planar FP cavity, while size-tunable WGMs are supported by ThT-coated starch granules. Granules were sorted into five diameter classes (<20, 20-30, 30-40, 40-60, and >60 μm), and lasing thresholds alongside fluorescence lifetimes were determined.

View Article and Find Full Text PDF

Ferronickel slag and ground granulated blast-furnace slag (GGBFS) are solid waste by-products from the metallurgical industry. When incorporated into concrete, they help promote resource utilization, reduce hydration heat, and lower both solid waste emissions and the carbon footprint. To facilitate the application of ferronickel slag-GGBFS concrete in 3D printing, this study examines how aggregate size and nozzle diameter affect its performance.

View Article and Find Full Text PDF

The Golgi of goblet cells represents a specialized machine for mucin glycosylation. This process occurs in a specialized form of the secretory pathway, which remains poorly examined. Here, using high-resolution three-dimensional electron microscopy (EM), EM tomography, serial block face scanning EM (SBF-SEM) and immune EM we analyzed the secretory pathway in goblet cells and revealed that COPII-coated buds on the endoplasmic reticulum (ER) are extremely rare.

View Article and Find Full Text PDF

Application of salinity during aerobic granulation has proven to be quite effective, with even more promising results when applied intermittently using pulses. This pulsed doping has been little explored, with studies restricted to conventional batch systems with variable volume, although the most common full-scale operating mode is simultaneous fill/draw (constant volume). Four reactors were monitored, differing in operating mode and salt addition: R1, constant volume without salt; R2, constant volume with salt pulses; R3, variable volume without salt; R4, variable volume with salt pulses.

View Article and Find Full Text PDF

Introduction: Monoosteophils, derived from LL-37-treated monocytes, are a novel type of calcifying/bone forming cells. We have shown that monoosteophils can form bone-like nodules and accelerate bone repair in a drilled femur defect model. Here, we explored the bone repair function of monoosteophils in a mouse model of critical-sized calvarial defect and the mechanism of bone nodule formation of monoosteophils .

View Article and Find Full Text PDF