Exploring the Application of Gold-Assisted Exfoliation in Large-scale Integration of n-Type and p-Type 2D-FETs.

2D materials, with their atomic-scale thickness and exceptional electronic properties, hold immense potential for advancing transistor technologies beyond silicon's limitations. While large-area growth techniques like metal-organic chemical vapor deposition (MOCVD) enable scalable device fabrication, achieving monolayers with high crystallinity remains challenging. Recently, gold-assisted mechanical exfoliation has emerged as a promising alternative, offering large-area monolayers isolated directly from bulk crystals.

High-performance p-type bilayer WSe field effect transistors by nitric oxide doping.

Two-dimensional (2D) materials are promising candidates for next-generation electronics, but the realization of high-performance p-type 2D field-effect transistors (FETs) has remained challenging, hindering the development of fully integrated 2D complementary metal-oxide-semiconductor (CMOS) technology. Here, we present p-type 2D FETs based on bilayer WSe synthesized via an industry-compatible metal-organic chemical vapor deposition (MOCVD) process. These devices achieve on-state current as high as 421 μA/μm at a drain voltage of 1 V and a gate overdrive voltage of 2.

A complementary two-dimensional material-based one instruction set computer.

Silicon has enabled advancements in semiconductor technology through miniaturization, but scaling challenges necessitate the exploration of new materials. Two-dimensional (2D) materials, with their atomic thickness and high carrier mobility, offer a promising alternative. Although significant progress has been made in wafer-scale growth, high-performance field-effect transistors and circuits based on 2D materials, achieving complementary metal-oxide-semiconductor (CMOS) integration remains a challenge.

A Crayfish-Inspired Sensor Fusion Platform for Super Additive Integration of Visual, Chemical, and Tactile Information.

The concept of cross-sensor modulation, wherein one sensor modality can influence another's response, is often overlooked in traditional sensor fusion architectures, leading to missed opportunities for enhancing data accuracy and robustness. In contrast, biological systems, such as aquatic animals like crayfish, demonstrate superior sensor fusion through multisensory integration. These organisms adeptly integrate visual, tactile, and chemical cues to perform tasks such as evading predators and locating prey.

A Butterfly-Inspired Multisensory Neuromorphic Platform for Integration of Visual and Chemical Cues.

Unisensory cues are often insufficient for animals to effectively engage in foraging, mating, and predatory activities. In contrast, integration of cues collected from multiple sensory organs enhances the overall perceptual experience and thereby facilitates better decision-making. Despite the importance of multisensory integration in animals, the field of artificial intelligence (AI) and neuromorphic computing has primarily focused on processing unisensory information.

An all 2D bio-inspired gustatory circuit for mimicking physiology and psychology of feeding behavior.

Animal behavior involves complex interactions between physiology and psychology. However, most AI systems neglect psychological factors in decision-making due to a limited understanding of the physiological-psychological connection at the neuronal level. Recent advancements in brain imaging and genetics have uncovered specific neural circuits that regulate behaviors like feeding.

A Graphene-Based Straintronic Physically Unclonable Function.

Physically unclonable functions (PUFs) are an integral part of modern-day hardware security. Various types of PUFs already exist, including optical, electronic, and magnetic PUFs. Here, we introduce a novel straintronic PUF (SPUF) by exploiting strain-induced reversible cracking in the contact microstructures of graphene field-effect transistors (GFETs).

Gargling with ketamine preoperatively decreases postoperative sore throat after endotracheal intubation in middle ear surgeries: A prospective randomized control study.

Postoperative sore throat (POST) is the eighth most common side effect in the postoperative period. Though it is considered as a minor side effect, it can lead to significant discomfort for the patient. Increased morbidity due to postoperative sore throat could have a big impact on outcomes with an increased economic burden to the nation.

Outcome of Adult Malarial Co-infections in Eastern India.

Introduction: Co-infection with different agents such as bacterial, viral, and Rickettsia is being increasingly recognized due to greater availability and utilization of the diagnostic tests among malaria patients.

Methods: Consecutive admitted malarial cases were included and were subjected to test for general investigations, bacteria, typhoid, dengue, chikungunya, and rest for specific diagnosis. All patients were followed up till discharge or death and appropriate statistical tests were performed.

Hydroxychloroquine plus personal protective equipment versus personal protective equipment alone for the prevention of laboratory-confirmed COVID-19 infections among healthcare workers: a multicentre, parallel-group randomised controlled trial from India.

Objectives: To determine whether hydroxychloroquine when used with personal protective equipment reduces the proportion of laboratory-confirmed COVID-19 among healthcare workers in comparison to the use of personal protective equipment alone.

Design: Multicentre, parallel-group, open-label randomised trial. Enrolment started on 29 June 2020 and stopped on 4 February 2021.

Pulmonary tuberculosis and pneumocystis jirovecii concurrent pneumonia in HIV infected patients at a resource limited setting in Eastern India: A case series.

Pneumocytis jirovecii pneumonia (PJP) and Pulmonary TB (PTB) both are common opportunistic infections among HIV infected individuals. But concurrent infections pose a diagnostic challenge owing to similar clinical features. Data suggests a high prevalence of such concurrent infections in developing countries but limited diagnostic modalities especially in resource constraint setup limits accurate diagnosis.

Concomitant falciparum malaria and Hyperreactive Malarial Splenomegaly in an adolescent boy from eastern India: A tale of rare coincidences.

Hyperreactive malarial splenomegaly (HMS) is one of the important causes of massive splenomegaly in malaria endemic zones. It is thought to represent a dysfunctional immune response to recurrent malarial infection. It is usually reported due to physical symptoms of splenomegaly and hypersplenism and fever is classically absent.

Surface-Functionalized Polypropylene Surgical Mesh for Enhanced Performance and Biocompatibility.

Polypropylene (PP) surgical mesh has attracted vast attention due to its chemical inertness and excellent mechanical properties. However, improvement is necessary to enhance its biocompatibility and to prevent unwanted tissue adhesion. This study addresses these issues through surface modification of plasma-activated PP mesh with a 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer.

Relativistic Anyon Beam: Construction and Properties.

Motivated by recent interest in photon and electron vortex beams, we propose the construction of a relativistic anyon beam. Following Jackiw and Nair [R. Jackiw and V.

Performance analysis of grafted poly (2-methacryloyloxyethyl phosphorylcholine) on additively manufactured titanium substrate for hip implant applications.

The incidence of total hip arthroplasty (THA) has been evidently growing over the last few decades. Surface modification, such as polymer grafting onto implant surfaces using poly (2-methacryloyloxyethyl phosphorylcholine) (PMPC), has been gaining attention due to its excellent biocompatibility and high lubricity behaviour resulting in reducing surgical recurrence number and increasing implant lifetime. Investigating thermal stability and mechanical properties of the grafted polymer is, therefore, extremely important as these properties define the failure mechanism of implants.

Optimisation of grafted phosphorylcholine-based polymer on additively manufactured titanium substrate for hip arthroplasty.

Despite the tremendous acceptance of additively manufactured (AM) Titanium alloys (Ti6Al4V) in the field of biomedical engineering, the high surface roughness due to partially-melted particles (fabricated in selective laser melting (SLM) process), limits their uses as hip implants. The objective of this study, therefore, is to modify the SLM fabricated Ti6Al4V implant interfaces with 2-Methacryloyloxyethyl phosphorylcholine (MPC) polymer, in the hope of enhancing surface properties and preventing the attachment of the cell simultaneously without affecting the mechanical properties significantly. Three different monomer concentrations were examined to determine the influence of monomer concentrations on polymerisation rate, chain length, and surface properties of the implants.

Selective laser melted titanium alloys for hip implant applications: Surface modification with new method of polymer grafting.

A significant number of hip replacements (HR) fail permanently despite the success of the medical procedure, due to wear and progressive loss of osseointegration of implants. An ideal model should consist of materials with a high resistance to wear and with good biocompatibility. This study aims to develop a new method of grafting the surface of selective laser melted (SLM) titanium alloy (Ti-6Al-4V) with poly (2-methacryloyloxyethyl phosphorylcholine) (PMPC), to improve the surface properties and biocompatibility of the implant.

Performance of Co/Ti multilayers in a water window soft x-ray regime.

The DC magnetron sputter grown Co/Ti multilayers, with ultra-low bi-layer thicknesses and with Co layers deposited under mixed ambience of argon and dry air, have been investigated for use in the water window soft x-ray regime of 23-44 Å. Initially, deposition parameters have been optimized for obtaining smooth and continuous low thickness Co and Ti single-layer films, and, then, multilayers with five bi-layers of various bi-layer thicknesses were deposited. The samples have been primarily characterized by the grazing incidence x-ray reflectivity (GIXR) measurements with a hard x-ray laboratory source.

Consistent induction of chronic experimental autoimmune encephalomyelitis in C57BL/6 mice for the longitudinal study of pathology and repair.

Background: While many groups use experimental autoimmune encephalomyelitis (EAE) as a model to uncover therapeutic targets and understand the pathology underlying multiple sclerosis (MS), EAE protocol variability introduces discrepancies in central nervous system (CNS) pathogenesis and clinical disease, limiting the comparability between studies and slowing much-needed translational research.

Optimized Method: Here we describe a detailed, reliable protocol for chronic EAE induction in C57BL/6 mice utilizing two injections of myelin oligodendrocyte glycoprotein (35-55) peptide mixed with complete Freund's adjuvant and paired with pertussis toxin.

Results: The active MOG-EAE protocol presented here induces ascending paralysis in 80-100% of immunized mice.

Status of surface modification techniques for artificial hip implants.

Surface modification techniques have been developed significantly in the last couple of decades for enhanced tribological performance of artificial hip implants. Surface modification techniques improve biological, chemical and mechanical properties of implant surfaces. Some of the most effective techniques, namely surface texturing, surface coating, and surface grafting, are applied to reduce the friction and wear of artificial implants.

Tribological performance of the biological components of synovial fluid in artificial joint implants.

The concentration of biological components of synovial fluid (such as albumin, globulin, hyaluronic acid, and lubricin) varies between healthy persons and osteoarthritis (OA) patients. The aim of the present study is to compare the effects of such variation on tribological performance in a simulated hip joint model. The study was carried out experimentally by utilizing a pin-on-disk simulator on ceramic-on-ceramic (CoC) and ceramic-on-polyethylene (CoP) hip joint implants.

Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid.

Osteoarthritis-oriented synovial fluid (OASF), i.e., that typical of a patient with osteoarthritis, has different physical and biological characteristics than bovine serum (BS), a lubricant widely used in biotribological investigations.