Evaluation of Anticancer Activity of Nucleoside-Nitric Oxide Photo-Donor Hybrids.

Herein, we report the synthesis of a new hybrid compound based on a 2'-deoxyuridine nucleoside conjugated with a NO photo-donor moiety (dU-t-NO) via CuAAC click chemistry. Hybrid dU-t-NO, as well as two previously reported 2'-deoxyadenosine based hybrids (dAdo-S-NO and dAdo-t-NO), were evaluated for their cytotoxic and cytostatic activities in selected cancer cell lines. dAdo-S-NO and dAdo-t-NO hybrids displayed higher activity with respect to dU-t-NO.

Role of Intragap States in Sensitized Sb-Doped Tin Oxide Photoanodes for Solar Fuels Production.

In view of developing photoelectrosynthetic cells which are able to store solar energy in chemical bonds, water splitting is usually the reaction of choice when targeting hydrogen production. However, alternative approaches can be considered, aimed at substituting the anodic reaction of water oxidation with more commercially capitalizable oxidations. Among them, the production of bromine from bromide ions was investigated long back in the 1980s by Texas Instruments.

Perfluorinated Zinc Porphyrin Sensitized Photoelectrosynthetic Cells for Enhanced TEMPO-Mediated Benzyl Alcohol Oxidation.

This research introduces a novel series of perfluorinated Zn(II) porphyrins with positive oxidation potentials designed as sensitizers for photoelectrosynthetic cells, with a focus on promoting the oxidation of benzyl alcohol (BzOH) mediated by the 2,2,6,6-tetramethyl-1-piperidine -oxyl (TEMPO) organocatalyst. Three dyes, , , and , are meticulously designed to explore the impact of substituents and their positions on the perfluorinated porphyrin ring in terms of redox potentials and energy level alignment when coupled with SnO/TiO-based photoanodes and TEMPO mediator. A comprehensive analysis utilizing spectroscopy, electrochemistry, photophysics, and computational techniques of the dyes in solution and sensitized thin films unveils an enhanced charge-separation character in the 4D-π-1A type .

Designing Ionic Ir(III) Cyclometalated Complexes as Photocatalysts for Light Assisted ATRP of MMA. A Combined Experimental and Mechanistic Study.

A new family of ionic Ir(III) cyclometalated complexes with general formula [Ir(CN)(NN)][Br], was designed and prepared to be assessed as photocalysts for the visible light assisted ATRP polymerization of MMA. To this purpose, our design strategy involved both: i) the decoration of the cyclometalating (CN) and the ancillary (NN) ligands with various electron withdrawing and/or electron donor substituents and, ii) the use of Br as the counter anion for these cationic Ir(III) species. After an extensive screening in which the [Ir(CN)(NN)][Br]-type compounds were compared to the model neutral complex fac-[Ir(ppy)], the "fully" amino-substituted ion pairs abbreviated as [10][Br] and [11][Br], exhibited the best photocatalytic performances under irradiation with CFL lamps.

Panchromatic light harvesting and record power conversion efficiency for carboxylic/cyanoacrylic Fe(ii) NHC co-sensitized FeSSCs.

Fe(ii) pyridyl-NHC sensitizers bearing thienylcyanoacrylic (ThCA) anchoring groups have been designed and characterized with the aim of enhancing the metal to surface charge separation and the light harvesting window in iron-sensitized DSSCs (FeSSCs). In these new Fe(ii) dyes, the introduction of the ThCA moiety remarkably extended the spectral response and the photocurrent, in comparison with their carboxylic analogues. The co-sensitization based on a mixture of a carboxylic and a ThCA-iron complex produced a panchromatic absorption, up to 800 nm and the best photocurrent and efficiency ( : 9 mA cm and PCE: 2%) ever reported for an FeSSC.

A Series of Iron(II)-NHC Sensitizers with Remarkable Power Conversion Efficiency in Photoelectrochemical Cells*.

A series of six new Fe(II)NHC-carboxylic sensitizers with their ancillary ligand decorated with functions of varied electronic properties have been designed with the aim to increase the metal-to- surface charge separation and light harvesting in iron-based dye-sensitized solar cells (DSSCs). ARM130 scored the highest efficiency ever reported for an iron-sensitized solar cell (1.83 %) using Mg and NBu I-based electrolyte and a thick 20 μm TiO anode.

New examples of Ru(II)-tetrazolato complexes as thiocyanate-free sensitizers for dye-sensitized solar cells.

A set of three new Ru(ii) polypyridyl complexes decorated with 5-aryl tetrazolato ligands (R-CN4)-, (D series, namely D1, D3 and D4), is presented herein. Whereas complex D1 represents the pyrazinyl tetrazolato analogue of a previously reported Ru(ii) complex (D2) with the general formula cis-[(dcbpy)2Ru(N^N)]+, in which dcbpy is 2,2'-bipyridine-4,4'-dicarboxylic acid and N^N is the chelating 2-pyridyl tetrazolato anion, the design of the unprecedented Ru(ii) species D3 and D4 relied upon a completely different architecture. More specifically, the molecular structure of thiocyanate-based species cis-[(dcbpy)2Ru(NCS)2], that is typically found in benchmark Ru(ii) dyes for dye sensitized solar cell (DSSCs), was modified with the replacement of two of the -NCS ligands in favour of the introduction of 5-aryl tetrazolato anions, such as the deprotonated form of 5-(4-bromophenyl)-1H-tetrazole, for complex D3 and 5-(4-cyanophenyl)-1H-tetrazole in the case of complex D4.

Photoelectrochemical Properties of SnO Photoanodes Sensitized by Cationic Perylene-Di-Imide Aggregates for Aqueous HBr Splitting.

Perylene-sensitized mesoporous SnO films were used as electrodes for photoelectrochemical HBr splitting in aqueous solution. Upon AM 1.5 G illumination a 3-4 fold increase of the saturated photocurrent was observed when decreasing the pH of the aqueous solution from pH 3 to pH 0 ( = 0.

Recombination and regeneration dynamics in FeNHC(ii)-sensitized solar cells.

Recombination and regeneration dynamics in Fe-NHC-sensitized DSSCs revealed incomplete injection and the detrimental effect of photoinjected electron recapture by the I-form of the redox electrolyte on performance. Importantly, the use of additives in the electrolyte allowed the best efficiency ever recorded for an iron-based DSSC to be reached.

Fluorinated Zn Porphyrins for Dye-Sensitized Aqueous Photoelectrosynthetic Cells.

Three perfluorinated Zn porphyrins were evaluated as n-type sensitizers in photoelectrosynthetic cells for HBr and water splitting. All the dyes are featured by the presence of pentafluorophenyl electron-withdrawing groups to increase the ground-state oxidation potential and differ for the nature and position of the π-conjugate linker between the core and anchoring group tasked to bind the metal oxide, in order to assess the best way of coupling with the semiconductor. A phenyl-triazole moiety was used to link the carboxylic anchoring group onto the position, while an ethynyl-phenyl linker was chosen to bridge carboxylic and cyanoacrylic groups onto the β-pyrrolic position.

Sedimentation field flow fractionation and optical absorption spectroscopy for a quantitative size characterization of silver nanoparticles.

Many advanced industrial and biomedical applications that use silver nanoparticles (AgNPs), require that particles are not only nano-sized, but also well dispersed, not aggregated and not agglomerated. This study presents two methods able to give rapidly sizes of monodispersed AgNPs suspensions in the dimensional range of 20-100nm. The first method, based on the application of Mie's theory, determines the particle sizes from the values of the surface plasmon resonance wavelength (SPR), read from the optical absorption spectra, recorded between 190nm and 800nm.

Charge injection into nanostructured TiO2 electrodes from the photogenerated reduced form of a new Ru(ii) polypyridine compound: the "anti-biomimetic" mechanism at work.

The charge transfer dynamics involving a new Ru(ii) polypyridine complex (1), developed to generate highly oxidizing photoholes for water oxidation, was studied by electrochemical, photoelectrochemical and spectroscopic means. Mesoporous TiO2 electrodes sensitized with complex 1, under 1 sun illumination (420 nm cut-off filter) and a moderate applied bias (0.3 V vs.

Photoelectrochemical Behavior of Electrophoretically Deposited Hematite Thin Films Modified with Ti(IV).

Doping hematite with different elements is a common strategy to improve the electrocatalytic activity towards the water oxidation reaction, although the exact effect of these external agents is not yet clearly understood. Using a feasible electrophoretic procedure, we prepared modified hematite films by introducing in the deposition solution Ti(IV) butoxide. Photoelectrochemical performances of all the modified electrodes were superior to the unmodified one, with a 4-fold increase in the photocurrent at 0.

Synthetic Antenna Functioning As Light Harvester in the Whole Visible Region for Enhanced Hybrid Photosynthetic Reaction Centers.

The photosynthetic reaction center (RC) from the Rhodobacter sphaeroides bacterium has been covalently bioconjugated with a NIR-emitting fluorophore (AE800) whose synthesis was specifically tailored to act as artificial antenna harvesting light in the entire visible region. AE800 has a broad absorption spectrum with peaks centered in the absorption gaps of the RC and its emission overlaps the most intense RC absorption bands, ensuring a consistent increase of the protein optical cross section. The covalent hybrid AE800-RC is stable and fully functional.

Correction: On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs.

Correction for 'On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs' by Stefano Carli et al., Phys. Chem.

Heterogeneous and Homogeneous Routes in Water Oxidation Catalysis Starting from Cu(II) Complexes with Tetraaza Macrocyclic Ligands.

Since the first report in 2012, molecular copper complexes have been proposed as efficient electrocatalysts for water oxidation reactions, carried out in alkaline/neutral aqueous media. However, in some cases the copper species have been recognized as precursors of an active copper oxide layer, electrodeposited onto the working electrode. Therefore, the question whether copper catalysis is molecular or not is particularly relevant in the field of water oxidation.

On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs.

The photoelectrochemical properties and stability of dye sensitized solar cells containing Mn(β-diketonato)3 complexes, [Mn(III)(acac)3] () (acac = acetylacetonate), [Mn(III)(CF2)3] () (CF2 = 4,4-difluoro-1-phenylbutanate-1,3-dione), [Mn(III)(DBM)3] () (DBM = dibenzoylmethanate), [Mn(II)(CF2)3]TBA (TBA = tetrabutylammonium) () and [Mn(II)(DBM)3]TBA (), have been evaluated. At room temperature, the complexes undergo ligand exchange with 4-tert-butyl-pyridine, an additive commonly used in the solar device to reduce charge recombination at the photoanode. An increased device stability was achieved by using the Z907 dye and passivating the photoanode with short chain siloxanes.

Improvement of the electron collection efficiency in porous hematite using a thin iron oxide underlayer: towards efficient all-iron based photoelectrodes.

Different approaches have been explored to increase the water oxidation activity of nanostructured hematite (α-Fe2O3) photoanodes, including doping with various elements, surface functionalization with both oxygen evolving catalysts (OEC) and functional overlayers and, more recently, the introduction of ultrathin oxide underlayers as tunneling back contacts. Inspired by this latter strategy, we present here a photoanode design with a nanometric spin-coated iron oxide underlayer coupled with a mesoporous hematite film deposited by electrophoresis. The electrodes equipped with the thin underlayer exhibit a four-fold improvement in photoactivity over the simple hematite porous film, reaching a stable photocurrent density of ca.

Modification of nanocrystalline WO3 with a dicationic perylene bisimide: applications to molecular level solar water splitting.

[(N,N'-Bis(2-(trimethylammonium)ethylene) perylene 3,4,9,10-tetracarboxylic acid bisimide)(PF6)2] (1) was observed to spontaneously adsorb on nanocrystalline WO3 surfaces via aggregation/hydrophobic forces. Under visible irradiation (λ > 435 nm), the excited state of 1 underwent oxidative quenching by electron injection (kinj > 10(8) s(-1)) to WO3, leaving a strongly positive hole (Eox ≈ 1.7 V vs SCE), which allows to drive demanding photo-oxidation reactions in photoelectrochemical cells (PECs).

Influence of porphyrinic structure on electron transfer processes at the electrolyte/dye/TiO₂ interface in PSSCs: a comparison between meso push-pull and β-pyrrolic architectures.

Time-resolved photophysical and photoelectrochemical investigations have been carried out to compare the electron transfer dynamics of a 2-β-substituted tetraarylporphyrinic dye (ZnB) and a 5,15-meso-disubstituted diarylporphyrinic one (ZnM) at the electrolyte/dye/TiO2 interface in PSSCs. Although the meso push-pull structural arrangement has shown, up to now, to have the best performing architecture for solar cell applications, we have obtained superior energy conversion efficiencies for ZnB (6.1%) rather than for ZnM (3.

Hematite photoanodes modified with an Fe(III) water oxidation catalyst.

Hematite photoelectrodes prepared via a hydrothermal route are functionalized with a water oxidation catalyst consisting of amorphous Fe(III) oxide, obtained by successive ionic layer adsorption and reaction. The performances of the catalyst-modified photoanodes are considerably higher than those of the parent electrodes, resulting in a nearly doubled photoanodic current in all the basic aqueous electrolytes explored in this study. The combination of electrochemical impedance spectroscopy and laser flash photolysis indicates that the presence of the catalyst results in enhanced hole trapping in surface reactive states exposed to the electrolyte, allowing for a more successful competition between charge transfer and recombination.

Efficient solar water oxidation using photovoltaic devices functionalized with earth-abundant oxygen evolving catalysts.

Indium tin oxide (ITO) surfaces of triple junction photovoltaic cells were functionalized with oxygen evolving catalysts (OECs) based on amorphous hydrous earth-abundant metal oxides (metal = Fe, Ni, Co), obtained by straightforward Successive Ionic Layer Adsorption and Reaction (SILAR) in an aqueous environment. Functionalization with Fe(iii) oxides gave the best results, leading to photoanodes capable of efficiently splitting water, with photocurrent densities up to 6 ± 1 mA cm(-2) at 0 V vs. the reversible hydrogen electrode (RHE) under AM 1.

Photocatalytic hydrogen evolution with a self-assembling reductant-sensitizer-catalyst system.

A noble-metal-free system for photochemical hydrogen production is described, based on ascorbic acid as sacrificial donor, aluminium pyridyl porphyrin as photosensitizer, and cobaloxime as catalyst. Although the aluminium porphyrin platform has docking sites for both the sacrificial donor and the catalyst, the resulting associated species are essentially inactive because of fast unimolecular reversible electron-transfer quenching. Rather, the photochemically active species is the fraction of sensitizer present, in the aqueous/organic solvent used for hydrogen evolution, as free species.

Nanostructured photoelectrodes based on WO3: applications to photooxidation of aqueous electrolytes.

Some recent studies mainly addressing the preparation and the modification of nanostructured thin films based on WO(3) and their application to photoelectrolysis of aqueous electrolytes are reviewed with the aim of rationalizing the main factors at the basis of an efficient photoanodic response. WO(3) represents one of the few materials which can achieve efficient water photo-oxidation under visible illumination, stably operating under strongly oxidizing conditions; thus the discussion of the structure-related photoelectrochemical properties of WO(3) thin films and their optimization for achieving almost quantitative photon to electron conversion constitutes the core of this contribution.

Strong π-delocalization and substitution effect on electronic properties of dithienylpyrrole-containing bipyridine ligands and corresponding ruthenium complexes.

The first dithienylpyrrole (DTP)-based bipyridine ligands has been prepared and coordinated with ruthenium to give the corresponding homoleptic complexes. Bipyridine was bound at pyrrole (DTP(1)) or thiophene (DTP(2)) ring. A strong bathochromic effect was obtained by switching from pyrrole to thiophene for ligands and complexes.