Antibacterial and Antifungal Tannic Acid Coating on Plasma-Activated Titanium Alloy Surface.

Titanium (Ti) alloys, renowned for their exceptional physicochemical properties and high biocompatibility, are widely utilized in orthopedic and dental implants; however, their lack of intrinsic antimicrobial activity significantly increases the risk of implant-associated infections, often leading to severe complications and implant failure. Developing antimicrobial coatings on Ti implants is therefore a promising strategy. In this study, tannic acid (TA) coatings were deposited by immersing Ti alloy surfaces-beforehand activated by low-temperature oxygen plasma-in TA solutions at 2, 5, and 8 wt%.

Enhancing Thin Film Properties of Chitosan-Collagen Biocomposites Through Potassium Silicate and Tannic Acid Integration.

Chitosan and collagen are natural polymers widely used in biomaterials science; however, their inherent low stability and solubility present several challenges to obtain formulations suitable for potential clinical applications. In this study, tannic acid (TA) was employed as a cross-linker to improve the properties of thin films made from chitosan and collagen. In addition, potassium silicate (PS) was added as an inorganic filler, to produce innovative biocomposite films.

Biodegradability Study of Modified Chitosan Films with Cinnamic Acid and Ellagic Acid in Soil.

Currently, natural polymer materials with bactericidal properties are extremely popular. Unfortunately, although the biopolymer material itself is biodegradable, its enrichment with bactericidal compounds may affect the efficiency of biodegradation by natural soil microflora. Therefore, the primary objective of this study was to evaluate the utility of fungi belonging to the genus in facilitating the degradation of chitosan film modified with cinnamic acid and ellagic acid in the soil environment.

Application Potential of in the Degradation of Phenolic Acid-Modified Chitosan.

The aim of the study was to determine the potential use of fungi of the genus for the degradation of phenolic acid-modified chitosan in compost. At the same time, the enzymatic activity in the compost was checked after the application of a preparation containing a suspension of the fungi (spores concentration 10/mL). The strains were characterized by high lipase and aminopeptidase activity, chitinase, and β-1,3-glucanases.

The Application of Phenolic Acids in The Obtainment of Packaging Materials Based on Polymers-A Review.

This article provides a summarization of present knowledge on the fabrication and characterization of polymeric food packaging materials that can be an alternative to synthetic ones. The review aimed to explore different studies related to the use of phenolic acids as cross-linkers, as well as bioactive additives, to the polymer-based materials upon their application as packaging. This article further discusses additives such as benzoic acid derivatives (sinapic acid, gallic acid, and ellagic acid) and cinnamic acid derivatives (-coumaric acid, caffeic acid, and ferulic acid).

3D-Structured and Blood-Contact-Safe Graphene Materials.

Graphene is a promising material that may be potentially used in biomedical applications, mainly for drug delivery applications. In our study, we propose an inexpensive 3D graphene preparation method by wet chemical exfoliation. The morphology of the graphene was studied by SEM and HRTEM.

Chitosan/Phenolic Compounds Scaffolds for Connective Tissue Regeneration.

Chitosan-based scaffolds modified by gallic acid, ferulic acid, and tannic acid were fabricated. The aim of the experiment was to compare the compatibility of scaffolds based on chitosan with gallic acid, ferulic acid, or tannic acid using the in vivo method. For this purpose, materials were implanted into rabbits in the middle of the latissimus dorsi muscle length.

Chitosan-based films enriched by caffeic acid with poly(ethylene glycol) - A physicochemical and antibacterial properties evaluation.

In this work, chitosan/caffeic acid mixtures in the weight ratios of 80/20 and 50/50 were used to obtain thin films enriched with poly(ethylene glycol). It was hypothesized that the presence of caffeic acid indicates the antibacterial properties of the materials (i) and that poly(ethylene glycol) acts as a films modifier (ii). The results showed that by poly(ethylene glycol) addition, the surface free energy as well as mechanical and thermal properties were improved.

Characterization of Collagen/Beta Glucan Hydrogels Crosslinked with Tannic Acid.

Hydrogels based on collagen/β-glucan crosslinked with tannic acid were obtained by neutralization using dialysis. The presence of tannic acid allowed obtaining stable hydrogel materials with better mechanical properties. Tannic acid was released from matrices gradually and not rapidly.

The Study of Physicochemical Properties and Blood Compatibility of Sodium Alginate-Based Materials via Tannic Acid Addition.

In this study, sodium alginate-based thin films were modified by the addition of tannic acid. Materials were obtained by solvent evaporation. They were characterized by the observation of its morphology and its surface by scanning electron microscope and atomic force microscope.

Microbial degradation of polyhydroxybutyrate with embedded polyhexamethylene guanidine derivatives.

The aim of this study was to isolate biofilm-forming bacteria that are capable of degrading polyhydroxybutyrate (PHB) with polyhexamethylene guanidine (PHMG) derivatives. The three types of derivatives incorporated in PHB and their concentration affected the biodegradability of the tested films in both water and compost. The PHMG derivative granular polyethylene wax at the highest concentration significantly inhibited BOD in both environments.

The role of microorganisms in biodegradation of chitosan/tannic acid materials.

High utilization of thermoplastic polymers with low degradation rates as packaging materials generates a large amount of waste. Therefore, it should be replaced by natural polymers that can be degraded by microorganisms. In this paper, chitosan (CTS)/tannic acid (TA) materials in the weight ratios of 80CTS/20TA and 50CTS/50TA were prepared as potential packaging materials.

Potential of Carvacrol and Thymol in Reducing Biofilm Formation on Technical Surfaces.

Polyvinyl chloride (PVC), polypropylene (PP), polyethylene (PE), and stainless steel (SS) are commonly used in medicine and food production technologies. During contact with microorganisms on the surface of these materials, a microbial biofilm is formed. The biofilm structure is difficult to remove and promotes the development of pathogenic bacteria.

The Preparation and Characterization of Chitosan-Based Hydrogels Cross-Linked by Glyoxal.

In this study, hydrogels based on chitosan cross-linked by glyoxal have been investigated for potential medical applications. Hydrogels were loaded with tannic acid at different concentrations. The thermal stability and the polyphenol-releasing rate were determined.

Preparation and Characterization of Fish Skin Collagen Material Modified with β-Glucan as Potential Wound Dressing.

Collagen possesses unique properties, e.g., biocompatibility, biodegradability, and non-toxicity.

Novel Eco-Friendly Tannic Acid-Enriched Hydrogels-Preparation and Characterization for Biomedical Application.

Sodium alginate and tannic acid are natural compounds that can be mixed with each other. In this study, we propose novel eco-friendly hydrogels for biomedical applications. Thus, we conducted the following assessments including (i) observation of the structure of hydrogels by scanning electron microscope; (ii) bioerosion and the concentration of released tannic acid from subjected material; (iii) dehydrogenase activity assay to determine antibacterial activity of prepared hydrogels; and (iv) blood and cell compatibility.

Development of tannic acid-enriched materials modified by poly(ethylene glycol) for potential applications as wound dressing.

The interests in the biomedical impact of tannic acid (TA) targeting production of various types of biomaterials, such as digital microfluids, chemical sensors, wound dressings, or bioimplants constantly increase. Despite the significant disadvantage of materials obtained from natural-based compounds and their low stability and fragility, therefore, there is an imperative need to improve materials properties by addition of stabilizing formulas. In this study, we performed assessments of thin films over TA proposed as a cross-linker to be used in combination with polymeric matrix based on chitosan (CTS), i.

Preparation and characterization of collagen/hyaluronic acid/chitosan film crosslinked with dialdehyde starch.

In this work thin film made from the mixture of collagen, hyaluronic acid and chitosan were obtained during solvent evaporation method. The mixtures of biopolymers were modified by dialdehyde starch, which was used as a crosslinking agent. The influence of crosslinking agent on the physico-chemical properties of polymeric matrices was evaluated.

Antimicrobial activity of new materials based on the blends of collagen/chitosan/hyaluronic acid with gentamicin sulfate addition.

In this study polymeric blends based on collagen, chitosan and hyaluronic acid in the form of thin films with the addition of gentamicin sulfate were obtained. Surface morphology of films was evaluated based on atomic force microscopy images. Surface free energy was measured and its polar and dispersive components were calculated.

Chemical composition, antimicromicrobial activity and insecticidal activity against the lesser mealworm Alphitobius diaperinus (Panzer) (Coleoptera: Tenebrionidae) of Origanum vulgare L. ssp. hirtum (Link) and Artemisia dracunculus L. essential oils.

Background: Essential oils (EOs) from Artemisia dracunculus L. and Origanum vulgare L. ssp.