GC-MS based metabolomic profiling of Aporosa cardiosperma (Gaertn.) Merr. leaf extracts and evaluating its therapeutic potential.

Aporosa cardiosperma is a plant species majorly found in the Indian Western Ghats that belongs to the phyllanthaceae family with ethnobotanical importance. Using a Fourier Transform-Infrared Spectrometer (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS) for evaluating leaf extracts of A. cardiosperma, significant functional groups and metabolite constituents were determined, and its total flavonoid, phenol, and tannin content were quantified.

Syrupy herbal formulation of green bean pod extract of L.: Formulation optimization by central composite design, and evaluation for anti-urolithiatic activity.

The green bean pods of L. are traditionally used as a folk remedy for treating calcium oxalate kidney stones. The current research aimed to develop a syrup formulation containing green bean pod extract for anti-urolithiatic activity.

Evaluating Biofilm Inhibitory Potential in Fish Pathogen, by Agricultural Waste Extracts and Assessment of Aerolysin Inhibitors Using Approach.

, an opportunistic bacteria, causes several devastating diseases in humans and animals, particularly aquatic species. Antibiotics have been constrained by the rise of antibiotic resistance caused by drug overuse. Therefore, new strategies are required to prevent appropriate antibiotic inability from antibiotic-resistant strains.

Bioactive Analysis of Antibacterial Efficacy and Antioxidant Potential of Aloe barbadensis Miller Leaf Extracts and Exploration of Secondary Metabolites Using GC-MS Profiling.

Aloe barbadensis Miller (ABM) is a traditional medicinal plant all over the world. Numerous studies were conducted to exhibit its medicinal properties and most of them were concentrated on its metabolites against human pathogens. The current research work evaluates the attributes of different polar-based extracts (ethanol, methanol, ethyl acetate, acetone, hexane, and petroleum ether) of dried Aloe barbadensis leaf (ABL) to investigate its phytochemical constituents, antioxidant potential (DPPH, ABTS), phenolic, tannin, flavonoid contents, identification of bioactive compounds, and functional groups by gas chromatography-mass spectrometry (GC-MS) and fourier transform infrared spectroscopy (FT-IR) respectively, and comparing antibacterial efficacy against human pathogens, aquatic bacterial pathogens, and zoonotic bacteria associated with fish and human.

Sustainable fabrication of hybrid silver-copper nanocomposites (Ag-CuO NCs) using Ocimum americanum L. as an effective regime against antibacterial, anticancer, photocatalytic dye degradation and microalgae toxicity.

In this study, a sustainable fabrication of hybrid silver-copper oxide nanocomposites (Ag-CuO NCs) was accomplished utilizing Ocimum americanum L. by one pot green chemistry method. The multifarious biological and environmental applications of the green fabricated Ag-CuO NCs were evaluated through their antibacterial, anticancer, dye degradation, and microalgae growth inhibition activities.

Exploration of marine red seaweed as a dietary fish meal replacement and its potentiality on growth, hematological, biochemical, and enzyme activity in freshwater fish Labeo rohita.

The present study investigated the dietary fishmeal replacement by marine red seaweed (Halymenia dilatata) meal (RSM) on growth performance, feed utilization, chemical body composition, hematological constituents, digestive, antioxidant, and metabolic enzymes in freshwater fish Labeo rohita (Rohu) fingerlings. The fish were fed with RSM-free control diet (RSM0) and four experimental diets, which replaced fish meal (FM) with varying levels of RSM (25%, 50%, 75%, and 100%, represented as RSM25, RSM50, RSM75, and RSM100 respectively). After a 60-day feeding trial, the survival rate (SR), growth performance (length gain, weight gain, and specific growth rate), protein efficiency ratio, chemical body composition (protein, lipid, and ash), and digestive enzymes (amylase and protease) were significantly increased (P < 0.

Emerging role of microalgae in heavy metal bioremediation.

Microalgae have been publicized for their diversified dominance responsiveness and bioaccumulation potential toward pollutants in an ecosystem. Also, algal's incredible capability as biocatalysts in environmental appliances has been well elucidated owing to their robustness and simple nutritional demand. Additionally, microalgae can deliver various collections of bio-based chemical compounds helpful for diversified applications, especially as green alternatives.

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system.

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals.

Improved Long-Term Reliability of a Silica-Encapsulated Perovskite Quantum-Dot Light-Emitting Device with an Optically Pumped Remote Film Package.

In this study, inorganic perovskite (CsPbBr) quantum dots are wrapped in SiO to provide better performance against external erosion. Long-term storage (250 days) is demonstrated with very little changes in the illumination capability of these quantum dots. While in the continuous aging procedure, different package architectures can achieve very different lifetimes.

Effects of graded levels of mineral mixtures (Aquamin® and Agrimin®) supplemented diets on growth, survival, proximate composition, and carcass mineralization of juvenile freshwater prawn, Macrobrachium malcolmsonii (H Milne-Edwards 1844).

The present study investigated the effects of Aquamin® mineral mixture (AQMM) and Agrimin® mineral mixture (AGMM) supplemented diets on growth and chemical composition of juvenile freshwater prawn Macrobrachium malcolmsonii (H. Milne-Edwards, 1844). Experimental diets containing 6 different AQMM levels (Trial 1: 0, 0.

Biofabrication of ecofriendly copper oxide nanoparticles using Ocimum americanum aqueous leaf extract: analysis of in vitro antibacterial, anticancer, and photocatalytic activities.

Nanotechnology tends to be a swiftly growing field of research that actively influences and inhibits the growth of bacteria/cancer. Noble metal nanoparticles (NPs) such as silver, copper, and gold have been used to damage bacterial and cancer growth over recent years; however, the toxicity of higher NPs concentrations remains a major issue. The copper oxide nanoparticles (CuONPs) were therefore fabricated using a simple green chemistry approach.

High-Performance Rechargeable Aluminum-Selenium Battery with a New Deep Eutectic Solvent Electrolyte: Thiourea-AlCl.

Aluminum-sulfur batteries (ASBs) have attracted substantial interest due to their high theoretical specific energy density, low cost, and environmental friendliness, while the traditional sulfur cathode and ionic liquid have very fast capacity decay, limiting cycling performance because of the sluggishly electrochemical reaction and side reactions with the electrolyte. Herein, we demonstrate, for the first time, excellent rechargeable aluminum-selenium batteries (ASeBs) using a new deep eutectic solvent, thiourea-AlCl, as an electrolyte and Se nanowires grown directly on a flexible carbon cloth substrate (Se NWs@CC) by a low-temperature selenization process as a cathode. Selenium (Se) is a chemical analogue of sulfur with higher electronic conductivity and lower ionization potential that can improve the battery kinetics on the sluggishly electrochemical reaction and the reduction of the polarization where the thiourea-AlCl electrolyte can stabilize the side reaction during the reversible conversion reaction of Al-Se alloying processes during the charge-discharge process, yielding a high specific capacity of 260 mAh g at 50 mA g and a long cycling life of 100 times with a high Coulombic efficiency of nearly 93% at 100 mA g.

Hybridizing Plasmonic Materials with 2D-Transition Metal Dichalcogenides toward Functional Applications.

Recently, 2D transition metal dichalcogenides (TMDs) have become intriguing materials in the versatile field of photonics and optoelectronics because of their strong light-matter interaction that stems from the atomic layer thickness, broadband optical response, controllable optoelectronic properties, and high nonlinearity, as well as compatibility. Nevertheless, the low optical cross-section of 2D-TMDs inhibits the light-matter interaction, resulting in lower quantum yield. Therefore, hybridizing the 2D-TMDs with plasmonic nanomaterials has become one of the promising strategies to boost the optical absorption of thin 2D-TMDs.

Deep Eutectic Solvent-Assisted Synthesis of Ternary Heterojunctions for the Oxygen Evolution Reaction and Photocatalysis.

Hierarchical nano-/microstructured photocatalysts have drawn attention for enhanced photocatalytic performance. Deep eutectic solvents (DESs) have been used as a green sustainable media to act as both solvent and structure-inducing agent in the synthesis of hierarchical nanomaterials. In this work, the DESs-assisted synthesis of flower-structured BiOCl/BiVO (BOC/BVO) with g-C N (BOC/BVO/g-CN) ternary heterojunctions was achieved by using a simple wet-chemical method, providing good acidic and alkaline oxygen evolution reaction (OER) catalysts.

Ultra-fast photodetectors based on high-mobility indium gallium antimonide nanowires.

Because of tunable bandgap and high carrier mobility, ternary III-V nanowires (NWs) have demonstrated enormous potential for advanced applications. However, the synthesis of large-scale and highly-crystalline InGaSb NWs is still a challenge. Here, we achieve high-density and crystalline stoichiometric InGaSb (0.

Selection Role of Metal Oxides into Transition Metal Dichalcogenide Monolayers by a Direct Selenization Process.

Direct reduction of metal oxides into a few transition metal dichalcogenide (TMDCs) monolayers has been recently explored as an alternative method for large area and uniform deposition. However, not many studies have addressed the characteristics and requirement of the metal oxides into TMDCs by the selenization/sulfurization processes, yielding a wide range of outstanding properties to poor electrical characteristics with nonuniform films. The large difference implies that the process is yet not fully understood.

Perovskite Quantum Dots with Near Unity Solution and Neat-Film Photoluminescent Quantum Yield by Novel Spray Synthesis.

In this study, a novel perovskite quantum dot (QD) spray-synthesis method is developed by combining traditional perovskite QD synthesis with the technique of spray pyrolysis. By utilizing this new technique, the synthesis of cubic-shaped perovskite QDs with a homogeneous size of 14 nm is demonstrated, which shows an unprecedented stable absolute photoluminescence quantum yield ≈100% in the solution and even in the solid-state neat film. The highly emissive thin films are integrated with light emission devices (LEDs) and organic light emission displays (OLEDs).

Thermally Strained Band Gap Engineering of Transition-Metal Dichalcogenide Bilayers with Enhanced Light-Matter Interaction toward Excellent Photodetectors.

Integration of strain engineering of two-dimensional (2D) materials in order to enhance device performance is still a challenge. Here, we successfully demonstrated the thermally strained band gap engineering of transition-metal dichalcogenide bilayers by different thermal expansion coefficients between 2D materials and patterned sapphire structures, where MoS bilayers were chosen as the demonstrated materials. In particular, a blue shift in the band gap of the MoS bilayers can be tunable, displaying an extraordinary capability to drive electrons toward the electrode under the smaller driven bias, and the results were confirmed by simulation.

Lead-Free Perovskite Nanowire Array Photodetectors with Drastically Improved Stability in Nanoengineering Templates.

Organometal halide perovskite materials have triggered enormous attention for a wide range of high-performance optoelectronic devices. However, their stability and toxicity are major bottleneck challenges for practical applications. Substituting toxic heavy metal, that is, lead (Pb), with other environmentally benign elements, for example, tin (Sn), could be a potential solution to address the toxicity issue.

Wafer Scale Phase-Engineered 1T- and 2H-MoSe /Mo Core-Shell 3D-Hierarchical Nanostructures toward Efficient Electrocatalytic Hydrogen Evolution Reaction.

The necessity for new sources for greener and cleaner energy production to replace the existing ones has been increasingly growing in recent years. Of those new sources, the hydrogen evolution reaction has a large potential. In this work, for the first time, MoSe /Mo core-shell 3D-hierarchical nanostructures are created, which are derived from the Mo 3D-hierarchical nanostructures through a low-temperature plasma-assisted selenization process with controlled shapes grown by a glancing angle deposition system.

Honeycomb-like Porous Carbon-Cobalt Oxide Nanocomposite for High-Performance Enzymeless Glucose Sensor and Supercapacitor Applications.

Herein, we report the preparation of Pongam seed shells-derived activated carbon and cobalt oxide (∼2-10 nm) nanocomposite (PSAC/Co3O4) by using a general and facile synthesis strategy. The as-synthesized PSAC/Co3O4 samples were characterized by a variety of physicochemical techniques. The PSAC/Co3O4-modified electrode is employed in two different applications such as high performance nonenzymatic glucose sensor and supercapacitor.