Silver-enriched microdomain patterns as advanced bactericidal coatings for polymer-based medical devices.

Today, it would be difficult for us to live a full life without polymers, especially in medicine, where its applicability is constantly expanding, giving satisfactory results without any harm effects on health. This study focused on the formation of hexagonal domains doped with AgNPs using a KrF excimer laser (λ=248 nm) on the polyetheretherketone (PEEK) surface that acts as an unfailing source of the antibacterial agent - silver. The hexagonal structure was formed with a grid placed in front of the incident laser beam.

Modification of AgNP-Decorated PET: A Promising Strategy for Preparation of AgNP-Filled Nuclear Pores in Polymer Membranes.

Polymer-based membranes represent an irreplaceable group of materials that can be applied in a wide range of key industrial areas, from packaging to high-end technologies. Increased selectivity to transport properties or the possibility of controlling membrane permeability by external stimuli represents a key issue in current material research. In this work, we present an unconventional approach with the introduction of silver nanoparticles (AgNPs) into membrane pores, by immobilising them onto the surface of polyethyleneterephthalate (PET) foil with subsequent physical modification by means of laser and plasma radiation prior to membrane preparation.

A New Promising Material for Biological Applications: Multilevel Physical Modification of AgNP-Decorated PEEK.

In the case of polymer medical devices, the surface design plays a crucial role in the contact with human tissue. The use of AgNPs as antibacterial agents is well known; however, there is still more to be investigated about their anchoring into the polymer surface. This study describes the changes in the surface morphology and behaviour in the biological environment of polyetheretherketone (PEEK) with immobilised AgNPs after different surface modifications.

Impact of palladium nanoparticles on plant and its fungal pathogen. A case study: .

The technological exploitation of palladium or palladium nanoparticles (PdNPs) is increasing, and their wider usage relates to an unwanted release of pollutants into the environment, raising public health concerns about the infiltration of palladium into the consumption chain. This study focuses on the effect of spherical gold-cored PdNPs of 50 ± 10 nm diameter stabilized by sodium citrate on the interaction between an oilseed rape () and the fungal pathogen Pretreatment of cotyledons with PdNPs suspension 24 h before but not 24 h after inoculation with resulted in a decrease in the extent of disease symptoms; however, this effect was caused by Pd ions (35 mg l or 70 mg l). Tests to determine any direct antifungal activity on demonstrated that the residual Pd ions present in the PdNP suspension were responsible for the antifungal activity and that PdNPs themselves do not contribute to this effect.

Surface Engineering of AgNPs-Decorated Polyetheretherketone.

Metal nanostructure-treated polymers are widely recognized as the key material responsible for a specific antibacterial response in medical-based applications. However, the finding of an optimal bactericidal effect in combination with an acceptable level of cytotoxicity, which is typical for metal nanostructures, prevents their expansion from being more significant so far. This study explores the possibility of firmly anchoring silver nanoparticles (AgNPs) into polyetherether ketone (PEEK) with a tailored surface morphology that exhibits laser-induced periodic surface structures (LIPSS).

Decoration of Ultramicrotome-Cut Polymers with Silver Nanoparticles: Effect of Post-Deposition Laser Treatment.

Today, ultramicrotome cutting is a practical tool, which is frequently applied in the preparation of thin polymeric films. One of the advantages of such a technique is the decrease in surface roughness, which enables an effective recording of further morphological changes of polymeric surfaces during their processing. In view of this, we report on ultramicrotome-cut polymers (PET, PEEK) modified by a KrF excimer laser with simultaneous decoration by AgNPs.

The Functionalization of a Honeycomb Polystyrene Pattern by Excimer Treatment in Liquid.

In this article, we present a unique combination of techniques focusing on the immobilization of noble metal nanoparticles into a honeycomb polystyrene pattern prepared with the improved phase-separation technique. The procedure consists of two main steps: the preparation of the honeycomb pattern (HCP) on a perfluoroethylenepropylene substrate (FEP), followed by an immobilization procedure realized by the honeycomb pattern's exposure to an excimer laser in a noble metal nanoparticle solution. The surface physico-chemical properties, mainly the surface morphology and chemistry, are characterized in detail in the study.

Etching and Doping of Pores in Polyethylene Terephthalate Analyzed by Ion Transmission Spectroscopy and Nuclear Depth Profiling.

This work is devoted to the study of controlled preparation and filling of pores in polyethylene terephthalate (PET) membranes. A standard wet chemical etching with different protocols (isothermal and isochronous etching for different times and temperatures and etching from one or both sides of the films) was used to prepare the micrometric pores. The pores were filled with either a LiCl solution or boron deposited by magnetron sputtering.

Smart Modulators Based on Electric Field-Triggering of Surface Plasmon-Polariton for Active Plasmonics.

Design and properties of a plasmonic modulator in situ tunable by electric field are presented. Our design comprises the creation of periodic surface pattern on the surface of an elastic polymer supported by a piezo-substrate by excimer laser irradiation and subsequent selective coverage by silver by tilted angle vacuum evaporation. The structure creation was confirmed by AFM and FIB-SEM techniques.

Laser-Processed PEN with Au Nanowires Array: A Biocompatibility Assessment.

Although many noble metals are known for their antibacterial properties against the most common pathogens, such as and , their effect on healthy cells can be toxic. For this reason, the choice of metals that preserve the antibacterial effect while being biocompatible with health cells is very important. This work aims to validate the effect of gold on the biocompatibility of Au/Ag nanowires, as assessed in our previous study.

Engineered Cu-PEN Composites at the Nanoscale: Preparation and Characterisation.

As polymeric materials are already used in many industries, the range of their applications is constantly expanding. Therefore, their preparation procedures and the resulting properties require considerable attention. In this work, we designed the surface of polyethylene naphthalate (PEN) introducing copper nanowires.

Laser-Promoted Immobilization of Ag Nanoparticles: Effect of Surface Morphology of Poly(ethylene terephthalate).

In the last two decades, the importance of nanomaterials in modern technologies has been unquestionable. Metal nanoparticles are frequently used in many areas of science and technology, delivering unprecedented improvements to properties of the conventional materials. This work introduces an effective tool for preparing a highly enriched poly (ethylene terephthalate) (PET) surface with silver nanoparticles, firmly immobilized in the same surface area on polymer.

Noble metal nanoparticles in agriculture: impacts on plants, associated microorganisms, and biotechnological practices.

Within the past decades, nanoparticles (NPs) have become common components of electronics, batteries, cosmetics, clothing, and even dietary supplements. Despite their undisputed advantages consisting in the possibility of engineering their novel physical, thermal, optical, and biological properties, safety questions arise concerning their wide exploitation. NPs interact with living organisms, which can interfere with essential life processes.

Silver Nanoparticles Alter Microtubule Arrangement, Dynamics and Stress Phytohormone Levels.

The superior properties of silver nanoparticles (AgNPs) has resulted in their broad utilization worldwide, but also the risk of irreversible environment infestation. The plant cuticle and cell wall can trap a large part of the nanoparticles and thus protect the internal cell structures, where the cytoskeleton, for example, reacts very quickly to the threat, and defense signaling is subsequently triggered. We therefore used not only wild-type seedlings, but also the mutant, which has a different composition of the cuticle.

Bimetallic Nanowires on Laser-Patterned PEN as Promising Biomaterials.

As inflammation frequently occurs after the implantation of a medical device, biocompatible, antibacterial materials must be used. Polymer-metal nanocomposites are promising materials. Here we prepared enhanced polyethylene naphthalate (PEN) using surface modification techniques and investigated its suitability for biomedical applications.

Antibacterial Properties of a Honeycomb-like Pattern with Cellulose Acetate and Silver Nanoparticles.

This study involved the preparation and characterization of structures with a honeycomb-like pattern (HCP) formed using the phase separation method using a solution mixture of chloroform and methanol together with cellulose acetate. Fluorinated ethylene propylene modified by plasma treatment was used as a suitable substrate for the formation of the HCP structures. Further, we modified the HCP structures using silver sputtering (discontinuous Ag nanoparticles) or by adding Ag nanoparticles in PEG into the cellulose acetate solution.

Genomic Damage Induced in L. Plants by Colloidal Solution with Silver and Gold Nanoparticles.

Tobacco seedlings ( L cv. 38) were treated for 24 h with colloidal solution of silver and gold nanoparticles (AgNPs and AuNPs) of different size or cultivated for 8 weeks on soil polluted with these NPs. DNA damage in leaf and roots nuclei was evaluated by the comet assay.

Surface Texturing of Polyethylene Terephthalate Induced by Excimer Laser in Silver Nanoparticle Colloids.

We report on a novel technique of surface texturing of polyethylene terephthalate (PET) foil in the presence of silver nanoparticles (AgNPs). This approach provides a variable surface morphology of PET evenly decorated with AgNPs. Surface texturing occurred in silver nanoparticle colloids of different concentrations under the action of pulse excimer laser.

PEGylated Gold Nanoparticles Grafted with N-Acetyl-L-Cysteine for Polymer Modification.

The subjects of this work were the enhancement and determination of the stability and other properties of gold nanoparticles (AuNPs) in an aqueous solution, gold nanoparticle immobilization, and further surface grafting on polyethylene naphthalate (PEN). Gold nanoparticles in PEG with a subsequent water solution addition were prepared using cathode sputtering; for the subsequent surface activation, two different solutions were used: (i) sodium citrate dihydrate (TCD) and (ii) N-acetyl-L-cysteine (NALC). The aim of this work was to study the effect of the concentration of these solutions on AuNPs stability, and further, the effect of the concentration of gold nanoparticles and their morphology, and to describe the aging process of solutions, namely, the optical properties of samples over 28 days.

Optomechanical Processing of Silver Colloids: New Generation of Nanoparticle-Polymer Composites with Bactericidal Effect.

The properties of materials at the nanoscale open up new methodologies for engineering prospective materials usable in high-end applications. The preparation of composite materials with a high content of an active component on their surface is one of the current challenges of materials engineering. This concept significantly increases the efficiency of heterogeneous processes moderated by the active component, typically in biological applications, catalysis, or drug delivery.

Nanostructured Materials for Artificial Tissue Replacements.

This paper review current trends in applications of nanomaterials in tissue engineering. Nanomaterials applicable in this area can be divided into two groups: organic and inorganic. Organic nanomaterials are especially used for the preparation of highly porous scaffolds for cell cultivation and are represented by polymeric nanofibers.

Methods of Gold and Silver Nanoparticles Preparation.

The versatile family of nanoparticles is considered to have a huge impact on the different fields of materials research, mostly nanoelectronics, catalytic chemistry and in study of cytocompatibility, targeted drug delivery and tissue engineering. Different approaches for nanoparticle preparation have been developed, not only based on "bottom up" and "top down" techniques, but also several procedures of effective nanoparticle modifications have been successfully used. This paper is focused on different techniques of nanoparticles' preparation, with primary focus on metal nanoparticles.

Round-shape gold nanoparticles: effect of particle size and concentration on Arabidopsis thaliana root growth.

Nowadays, due to a wide range of applications of nanoparticles (NPs) in many industrial areas, accumulations of those entities in environment pose a great risk. Owing to their inertness, noble metal NPs may remain in contaminated soils nearly unchanged for long time. Within this context, size-, shape-, and concentration-dependent uptake of particles by plants belongs to unexplored area.

Polymer nanostructures for bioapplications induced by laser treatment.

Modification of polymer substrates can essentially change the properties of material and thereby it allows their usage in attractive fields of material research. Laser treatment can be successfully applied for change in physico-chemical surface properties and/or for selective change of surface morphology with pattern construction. Three major applications of laser induced structures were described, cytocompatibility control, application as anti-bacterial substrate and plasmonic-based detection system.

Antimicrobial Treatment of Polymeric Medical Devices by Silver Nanomaterials and Related Technology.

Antimicrobial biocompatible polymers form a group of highly desirable materials in medicinal technology that exhibit interesting thermal and mechanical properties, and high chemical resistance. There are numerous types of polymers with antimicrobial activity or antimicrobial properties conferred through their proper modification. In this review, we focus on the second type of polymers, especially those whose antimicrobial activity is conferred by nanotechnology.