Acta Crystallogr B Struct Sci Cryst Eng Mater
October 2024
The magnetic structure adopted by a material relies on symmetry, the hierarchy of exchange interactions between magnetic ions and local anisotropy. A direct pathway to control the magnetic interactions is to enforce dimensionality within the material, from zero-dimensional isolated magnetic ions, one-dimensional (1D) spin-chains, two-dimensional (2D) layers to three-dimensional (3D) order. Being able to design a material with a specific dimensionality for the phenomena of interest is non-trivial.
View Article and Find Full Text PDFMagnetic skyrmions are topologically protected, nanoscale whirls of the spin configuration that tend to form hexagonally ordered arrays. As a topologically non-trivial structure, the nucleation and annihilation of the skyrmion, as well as the interaction between skyrmions, varies from conventional magnetic systems. Recent works have suggested that the ordering kinetics in these materials occur over millisecond or longer timescales, which is unusually slow for magnetic dynamics.
View Article and Find Full Text PDFThe magnetic structure of KCo(MoO)(OH) is studied in detail. The material has a half-sawtooth one-dimensional (1-D) structure containing two unique Co ions, one in the chain backbone and one on the apex of the sawtooth creating a series of isosceles triangles along the -axis. These triangles can be a source of magnetic frustration.
View Article and Find Full Text PDFAdv Mater
August 2023
Magnetic skyrmions exhibit unique, technologically relevant pseudo-particle behaviors which arise from their topological protection, including well-defined, 3D dynamic modes that occur at microwave frequencies. During dynamic excitation, spin waves are ejected into the interstitial regions between skyrmions, creating the magnetic equivalent of a turbulent sea. However, since the spin waves in these systems have a well-defined length scale, and the skyrmions are on an ordered lattice, ordered structures from spin-wave interference can precipitate from the chaos.
View Article and Find Full Text PDFThorium was a part of energy infrastructure in the 19th century due to the refractory and electronic properties of its dioxide. It will be a part of future energy infrastructure as the most abundant energy reserve based on nuclear fission. This paper discusses the solid-state chemistry of the monoxides and related rocksalt phases of thorium and the rare earths, both at atmospheric and at high pressure.
View Article and Find Full Text PDFSci Rep
December 2022
High traffic touch surfaces such as doorknobs, countertops, and handrails can be transmission points for the spread of pathogens, emphasizing the need to develop materials that actively self-sanitize. Metals are frequently used for these surfaces due to their durability, but many metals also possess antimicrobial properties which function through a variety of mechanisms. This work investigates metallic alloys comprised of several metals which individually possess antimicrobial properties, with the target of achieving broad-spectrum, rapid sanitation through synergistic activity.
View Article and Find Full Text PDFInterconnected magnetic nanowire (NW) networks offer a promising platform for three-dimensional (3D) information storage and integrated neuromorphic computing. Here we report discrete propagation of magnetic states in interconnected Co nanowire networks driven by magnetic field and current, manifested in distinct magnetoresistance (MR) features. In these networks, when only a few interconnected NWs were measured, multiple MR kinks and local minima were observed, including a significant minimum at a positive field during the descending field sweep.
View Article and Find Full Text PDFACS Appl Mater Interfaces
April 2022
The chemical composition and morphology of AuCo thin films and nanoparticles are controlled via a combination of cosputtering, pulsed laser-induced dewetting (PLiD), and annealing, leading to tunable magnetic and optical properties. Regardless of chemical composition, the as-deposited thin films and as-PLiD nanoparticles are found to possess a face-centered cubic (FCC) AuCo solid-solution crystal structure. Annealing results in large phase-separated grains of Au and Co in both the thin films and nanostructures for all chemical compositions.
View Article and Find Full Text PDFThe configurational complexity and distinct local atomic environments of high entropy oxides remain largely unexplored, leaving structure-property relationships and the hypothesis that the family offers rich tunability for applications ambiguous. This work investigates the influence of cation size and materials synthesis in determining the resulting structure and magnetic properties of a family of high entropy rare-earth zirconates (HEREZs, nominal composition RE Zr O with RE = rare-earth element combinations including Eu, Gd, Tb, Dy, Ho, La, or Sc). The structural characterization of the series is examined through synchrotron X-ray diffraction and pair distribution function analysis, and electron microscopy, demonstrating average defect-fluorite structures with considerable local disorder, in all samples.
View Article and Find Full Text PDFThe first order reversal curve (FORC) method is a magnetometry based technique used to capture nanoscale magnetic phase separation and interactions with macroscopic measurements using minor hysteresis loop analysis. This makes the FORC technique a powerful tool in the analysis of complex systems which cannot be effectively probed using localized techniques. However, recovering quantitative details about the identified phases which can be compared to traditionally measured metrics remains an enigmatic challenge.
View Article and Find Full Text PDFFree-standing, interconnected metallic nanowire networks with densities as low as 40 mg/cm have been achieved over centimeter-scale areas, using electrodeposition into polycarbonate membranes that have been ion-tracked at multiple angles. Networks of interconnected magnetic nanowires further provide an exciting platform to explore 3-dimensional nanomagnetism, where their structure, topology, and frustration may be used as additional degrees of freedom to tailor the materials properties. New magnetization reversal mechanisms in cobalt networks are captured by the first-order reversal curve method, which demonstrate the evolution from strong demagnetizing dipolar interactions to intersection-mediated domain wall pinning and propagation, and eventually to shape-anisotropy dominated magnetization reversal.
View Article and Find Full Text PDFMagnetic skyrmions have been the focus of intense research due to their unique qualities which result from their topological protections. Previous work on CuOSeO, the only known insulating multiferroic skyrmion material, has shown that chemical substitution alters the skyrmion phase. We chemically substitute Zn, Ag, and S into powdered CuOSeO to study the effect on the magnetic phase diagram.
View Article and Find Full Text PDFThis work reports the ferromagnetism of topological insulator, (Bi,Sb)Te (BST), with a Curie temperature of approximately 120 K induced by magnetic proximity effect (MPE) of an antiferromagnetic CrSe. The MPE was shown to be highly dependent on the stacking order of the heterostructure, as well as the interface symmetry: Growing CrSe on top of BST results in induced ferromagnetism, while growing BST on CrSe yielded no evidence of an MPE. Cr-termination in the former case leads to double-exchange interactions between Cr surface states and Cr bulk states.
View Article and Find Full Text PDFPulsed laser-induced dewetting (PLiD) of AgNi thin films results in phase-separated bimetallic nanoparticles with size distributions that depend on the initial thin film thickness. Co-sputtering of Ag and Ni is used to generate the as-deposited (AD) nanogranular supersaturated thin films. The magnetic and optical properties of the AD thin films and PLiD nanoparticles are characterized using a vibrating sample magnetometer, optical absorption spectroscopy, and electron energy loss spectroscopy (EELS).
View Article and Find Full Text PDFIntegration of a quantum anomalous Hall insulator with a magnetically ordered material provides an additional degree of freedom through which the resulting exotic quantum states can be controlled. Here, an experimental observation is reported of the quantum anomalous Hall effect in a magnetically-doped topological insulator grown on the antiferromagnetic insulator Cr O . The exchange coupling between the two materials is investigated using field-cooling-dependent magnetometry and polarized neutron reflectometry.
View Article and Find Full Text PDFDistance-dependent magnetic resonance tuning (MRET) technology enables the sensing and quantitative imaging of biological targets in vivo, with the advantage of deep tissue penetration and fewer interactions with the surroundings as compared with those of fluorescence-based Förster resonance energy transfer. However, applications of MRET technology in vivo are currently limited by the moderate contrast enhancement and stability of T-based MRET probes. Here we report a new two-way magnetic resonance tuning (TMRET) nanoprobe with dually activatable T and T magnetic resonance signals that is coupled with dual-contrast enhanced subtraction imaging.
View Article and Find Full Text PDFAn amendment to this paper has been published and can be accessed via a link at the top of the paper.
View Article and Find Full Text PDFThe Seebeck effect converts thermal gradients into electricity. As an approach to power technologies in the current Internet-of-Things era, on-chip energy harvesting is highly attractive, and to be effective, demands thin film materials with large Seebeck coefficients. In spintronics, the antiferromagnetic metal IrMn has been used as the pinning layer in magnetic tunnel junctions that form building blocks for magnetic random access memories and magnetic sensors.
View Article and Find Full Text PDFEngineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180° spin switching between states. We demonstrate a previously unobserved eightfold anisotropy in magnetic SrRuO monolayers by inducing a spin reorientation in (SrRuO)/(SrTiO) superlattices, in which the magnetic easy axis of Ru spins is transformed from uniaxial 〈001〉 direction ( < 3) to eightfold 〈111〉 directions ( ≥ 3).
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2020
Solid-state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here, we report a simple, scalable approach allowing for manipulation of the superconducting transition in optimally doped YBaCuO (YBCO) films via a chemically driven ionic migration mechanism. Using a thin Gd capping layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO.
View Article and Find Full Text PDFPhys Rev Mater
August 2019
We report observation of a radial dependence in the magnetic anisotropy of epitaxially strained CoFeO nanopillars in a BaTiO matrix. This archetypal example of a multiferroic heterostructure with a self-assembling three-dimensional architecture possesses significant out-of-plane uniaxial magnetic anisotropy. The anisotropy originates from the large magnetostriction of CoFeO and the state of stress within the nanocomposite.
View Article and Find Full Text PDFControl of materials through custom design of ionic distributions represents a powerful new approach to develop future technologies ranging from spintronic logic and memory devices to energy storage. Perovskites have shown particular promise for ionic devices due to their high ion mobility and sensitivity to chemical stoichiometry. In this work, we demonstrate a solid-state approach to control of ionic distributions in (La, Sr)CoO thin films.
View Article and Find Full Text PDFElectric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena.
View Article and Find Full Text PDF