Carboxybetaine zwitterionic coatings on kidney dialyzer components: Surface characterization and blood interactions.

Chronic Kidney Disease (CKD) affects a significant portion of the population, leading to end-stage renal disease (ESRD). ESRD is most often addressed by hemodialysis treatment, however, clinically significant interactions can occur between blood components, the dialysis membranes and the entire dialysis circuit. Zwitterionic compounds, such as polycarboxybetaine (PCB), are known for their ability to prevent blood protein adsorption and reduce platelet and complement activation.

Synthetic vascular graft that heals and regenerates.

Millions of synthetic vascular grafts (sVG) are needed annually to address vascular diseases (a leading cause of death in humans) and kidney failure (as vascular access). However, in 70+ years since the first sVG in humans, we still do not have sVGs that fully endothelialize (the "holy grail" for truly successful grafts). The lack of healthy endothelium is believed to be a main cause for thrombosis, stenosis, and infection (the major reasons for graft failure).

The Origins of Engineered Biomaterials: NSF-Funded, University of Washington Engineered Biomaterials (UWEB).

The University of Washington Engineered Biomaterials (UWEB) Engineering Research Center (ERC) was funded from 1996 to 2007 by the U.S. National Science Foundation.

Porous Precision-Templated 40 μm Pore Scaffolds Promote Healing through Synergy in Macrophage Receptor with Collagenous Structure and Toll-Like Receptor Signaling.

Porous precision-templated scaffolds (PTS) with uniform, interconnected, 40 μm pores have shown favorable healing outcomes and a reduced foreign body reaction (FBR). Macrophage receptor with collagenous structure (MARCO) and toll-like receptors (TLRs) have been identified as key surface receptors in the initial inflammatory phase of wound healing. However, the role of MARCO and TLRs in modulating monocyte and macrophage phenotypes within PTS remains uncharacterized.

Surface immobilized α-1 acid glycoprotein and collagen VI modulate mouse macrophage polarization and reduce the foreign body capsule.

Macrophages are widely recognized in modulating the foreign body response, and the manner in which they do so largely depends on their activation state, often referred to as their polarization. This preliminary study demonstrates that surface immobilized α-1 acid glycoprotein (AGP), as well as collagen VI (Col6) in conjunction with AGP, can direct macrophages towards the M2 polarization state in vitro and modify the foreign body response in vivo. AGP and Col6 are immobilized onto poly(2-hydroxyethyl methacrylate) (pHEMA) surfaces using carbonyl diimidazole chemistry.

Novel HALO® image analysis to determine cell phenotype in porous precision-templated scaffolds.

Image analysis platforms have gained increasing popularity in the last decade for the ability to automate and conduct high-throughput, multiplex, and quantitative analyses of a broad range of pathological tissues. However, imaging tissues with unique morphology or tissues containing implanted biomaterial scaffolds remain a challenge. Using HALO®, an image analysis platform specialized in quantitative tissue analysis, we have developed a novel method to determine multiple cell phenotypes in porous precision-templated scaffolds (PTS).

Monocytes contribute to a pro-healing response in 40 μm diameter uniform-pore, precision-templated scaffolds.

Porous precision-templated scaffolds (PTS) with uniformly distributed 40 μm spherical pores have shown a remarkable ability in immunomodulating resident cells for tissue regeneration. While the pore size mediated pro-healing response observed only in 40 μm pore PTS has been attributed to selective macrophage polarization, monocyte recruitment and phenotype have largely been uncharacterized in regulating implant outcome. Here, we employ a double transgenic mouse model for myeloid characterization and a multifaceted phenotyping approach to quantify monocyte dynamics within subcutaneously implanted PTS.

Polymer Surface Analysis: The Leadership and Contributions of David Briggs.

David Briggs was a surface analysis pioneer. Starting in 1970 and continuing throughout his career, Dave used his expertise, vision and ability to quickly master new surface analysis methods and solve important industrial problems. It certainly helped that he was an outstanding fund raiser in both industrial and academic settings, which ensured he always had an impressive array of the latest, most advanced surface analysis instrumentation at his disposal.

Plasma Polymerized HMDSO Coatings For Syringes To Minimize Protein Adsorption.

Current parenteral containers used for the storage and delivery of protein-based drugs, contain silicone oil which may seep into the protein solution and can result in adsorption, aggregation and denaturation of the protein. Tightly adherent surface coatings prepared by radio frequency glow-discharge (RFGD) plasma polymerization are described in this paper. Using this robust technique, methacrylic acid (MA) (hydrophilic), hexamethyldisiloxane (HMDSO) (hydrophobic), tetraglyme (TG) (hydrophilic) were plasma polymerized onto glass.

Surface-Treated Pellethanes: Comparative Quantification of Encrustation in Artificial Urine Solution.

Encrustation of implanted urinary tract devices is associated with significant morbidity. Pellethane is a polyether-based compound noted for its strength, porosity, and resistance to solvents. We assessed Pellethane thermoplastic polyurethane (TPU) with and without surface coatings 2-hydroxyethyl methacrylate (HEMA) and tetraethylene glycol dimethyl ether (TETRA) for the potential to resist encrustation in an artificial urine environment.

Highly-reactive haloester surface initiators for ARGET ATRP readily prepared by radio frequency glow discharge plasma.

New surface initiators for ARGET ATRP (activators regenerated by electron transfer atomic transfer radical polymerization) have been prepared by the plasma deposition of haloester monomers. Specifically, methyl 3-bromopropionate (M3BP), methyl 2-chloropropionate, and ethyl 2-fluoropropionate (E2FP) were plasma deposited onto glass discs using RF glow discharge plasma. This technique creates surface coatings that are resistant to delamination and rich in halogen species making them good candidates for surface initiators for ARGET ATRP.

Trifluoromethyl-functionalized poly(lactic acid): a fluoropolyester designed for blood contact applications.

Fluorinated polymers are strong candidates for development of new cardiovascular medical devices, due to their lower thrombogenicity as compared to other polymers used for cardiovascular implants. Few studies have reported the development of fluorinated polyesters and their potential in blood contact applications has never been examined. In this study, we developed a versatile method for preparing trifluoromethyl-functionalized poly(lactic acid) that can be potentially extended to prepare a new class of polyesters with various halogen or halocarbon substitutions.

Biomaterials: Been There, Done That, and Evolving into the Future.

Biomaterials as we know them today had their origins in the late 1940s with off-the-shelf commercial polymers and metals. The evolution of materials for medical applications from these simple origins has been rapid and impactful. This review relates some of the early history; addresses concerns after two decades of development in the twenty-first century; and discusses how advanced technologies in both materials science and biology will address concerns, advance materials used at the biointerface, and improve outcomes for patients.

BloodSurf 2017: News from the blood-biomaterial frontier.

From stents and large-diameter vascular grafts, to mechanical heart valves and blood pumps, blood-contacting devices are enjoying significant clinical success owing to the application of systemic antiplatelet and anticoagulation therapies. On the contrary, research into material and device hemocompatibility aimed at alleviating the need for systemic therapies has suffered a decline. This research area is undergoing a renaissance fueled by recent fundamental insights into coagulation and inflammation that are offering new avenues of investigation, the growing recognition of the limitations facing existing therapeutic approaches, and the severity of the cardiovascular disorders epidemic.

Surface fluorination of polylactide as a path to improve platelet associated hemocompatibility.

Unlabelled: Surface-induced thrombosis is still a significant clinical concern for many types of blood-contacting medical devices. In particular, protein adsorption and platelet adhesion are important events due to their ability to trigger the coagulation cascade and initiate thrombosis. Poly(lactic acid) (PLA) has been the predominant polymer used for making bioresorbable stents.

Collagen affinity coating for surface binding of decorin and other biomolecules: Surface characterization.

The development of biomaterials that promote tissue reconstruction and regeneration can reduce the low level, chronic inflammation and encapsulation that impact the performance of today's medical devices. Specifically, in the case of implantable sensors, the host response often leads to poor device performance that discourages permanent implantation. Our goal is to present on medical implants bioactive molecules that can promote healing rather than scarring.

The impact of detergents on the tissue decellularization process: A ToF-SIMS study.

Unlabelled: Biologic scaffolds are derived from mammalian tissues, which must be decellularized to remove cellular antigens that would otherwise incite an adverse immune response. Although widely used clinically, the optimum balance between cell removal and the disruption of matrix architecture and surface ligand landscape remains a considerable challenge. Here we describe the use of time of flight secondary ion mass spectroscopy (ToF-SIMS) to provide sensitive, molecular specific, localized analysis of detergent decellularized biologic scaffolds.

Blood compatibility assessment of polymers used in drug eluting stent coatings.

Differences in thrombosis rates have been observed clinically between different drug eluting stents. Such differences have been attributed to numerous factors, including stent design, injury created by the catheter delivery system, coating application technologies, and the degree of thrombogenicity of the polymer. The relative contributions of these factors are generally unknown.

A pore way to heal and regenerate: 21st century thinking on biocompatibility.

This article raises central questions about the definition of biocompatibility, and also about how we assess biocompatibility. We start with the observation that a porous polymer where every pore is spherical, ∼40 microns in diameter and interconnected, can heal into vascularized tissues with little or no fibrosis and good restoration of vascularity (i.e.