Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Background: The energy efficiency and environmental friendliness of recombinant chitinase A make it a promising candidate for industrial applications as a sustainable catalyst. For the first time, a very stable and an efficient biocatalyst was developed to decolorize synthetic dyes by immobilizing Serratia marcescens chitinase A (SmChiA) onto beads comprised of sodium alginate (SA) and modified rice husk powder (mRHP). The mRHP was produced by treating rice husk powder with citric acid, which was then combined with SA at three different concentrations (25, 50 and 100% of SA weight) and cross-linked with calcium chloride to form the beads. 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide facilitates the formation of amide bonds that covalently bind SmChiA to the beads. The effectiveness of the synthesis and immobilization processes was confirmed using characterization methods (scanning electron microscopy, SEM and Fourier transform infrared spectroscopy, FTIR).

Results: Beads with 50% mRHP and 1.75 UmL of enzyme solution achieved the highest immobilization after 5 h of activation. The immobilized SmChiA demonstrated superior pH, temperature, and storage stability in respect to its free relative. The K value was 3.33 mg/mL, while the V was 4.32 U/mg protein/min. Activation energy (Ea), denaturation (E), half-lives (T), and decimal reduction time (D-values) were evaluated for immobilized and free SmChiA. The immobilization of SmChiA increased its affinity for the substrates by around 2.12 to 2.18 times. Compared to free chitinase, immobilized chitinase demonstrated greater durability after 22 reuses, maintaining its full activity. This proved the suitability of SA-mRHP beads as a cross-linker for chitinase immobilization. Crystal violet, malachite green, safranin, and methylene blue were more effectively decolorized from aqueous solutions by the immobilized SmChiA at a contact period of 84-h, dosage of 2.625 U/1.5 g, and temperature of 30 C. Using an immobilized biocatalyst, the biodegradation was also examined using UV, FTIR, and SEM-EDX. The results confirmed the dye degradation.

Conclusion: A variety of dyes could be safely removed from the environment using our bioremediation procedures. To the best of our knowledge, no studies had been conducted on the application of immobilized chitinase for dye removal.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12376360PMC
http://dx.doi.org/10.1186/s13036-025-00546-4DOI Listing

Publication Analysis

Top Keywords

rice husk
12
recombinant chitinase
8
synthetic dyes
8
smchia beads
8
husk powder
8
immobilized smchia
8
immobilized chitinase
8
chitinase
7
beads
6
smchia
6

Similar Publications

In this study, a silicon carbide (SiC) mixed-matrix membrane for oil-water separation was successfully fabricated within the nanofiltration range. Silicon carbide was synthesized using rice husk ash (RHA), an agricultural waste material, combined with polydimethylsiloxane (PDMS) and subsequently incorporated into a mixed matrix membrane for oil-water separation. Polysulfone (PSF) and polyvinylpyrrolidone (PVP) were employed as polymer supports for fabricating the SiC-based mixed matrix membrane, which was tested in a dead-end filtration setup.

View Article and Find Full Text PDF

This study investigates the effects of pyrolytic temperature and feedstock type on the release of biochar-derived dissolved organic matter (BDOM) and its impact on the soil bacterial community and the composition of soil dissolved organic matter (SDOM). The BDOM was extracted from biochars produced from sheep bones, rice husk, and rabbit manure, prepared at low (400 °C, LPT) or high (700 °C, HPT) pyrolytic temperatures. The BDOM was then applied at a concentration of 2.

View Article and Find Full Text PDF

The efficient handling of agricultural waste is rapidly gaining worldwide recognition. This study analyzes the impact of three distinct pyrolysis temperatures (250, 300, and 350 °C) on the physicochemical properties of the biochar produced from rice husk, sugarcane bagasse, and groundnut shells with a fixed pyrolysis time of 3 h. The influence of the pyrolysis temperature was assessed by calculating the biochar yield, electrical conductivity (EC), pH, proximate analysis, and ultimate analysis.

View Article and Find Full Text PDF

Sustainable Rice Husk Ash-Tannin Xerogel for Ciprofloxacin Removal from Water.

Environ Res

August 2025

International Research Centre of Nanotechnology for Himalayan Sustainability (IRCNHS), Shoolini University, Solan 173229, India; Institute for Interdisciplinary and Innovation Research, Xi'an University of Architecture and Technology, Xi'an 710055, P.R. China. Electronic address: gaurav.541@shooloni

This research investigates the synthesis and application of a bioderived xerogel (BDX) synthesized from rice husk and tannins to eliminate Ciprofloxacin (CIP) from water-based media. Xerogel was prepared via sol-gel method, incorporating rice husk ash and tannin extract, along with polyvinyl alcohol (PVA) as a binding agent. Characterization techniques including, FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), AFM (Atomic Force Microscopy), TGA (Thermogravimetric Analysis), and BET (Brunauer-Emmett-Teller) surface area analysis were employed to evaluate its structural and chemical properties.

View Article and Find Full Text PDF

Sol-Gel-Derived Silica/Alumina Particles for Enhancing the Mechanical Properties of Acrylate Composite Materials.

Gels

July 2025

Department of Chemical Dynamics and Permanent Education, VINČA Institute of Nuclear Sciences-National Institute of the Republic of Serbia, University of Belgrade, 11351 Belgrade, Serbia.

Silica/alumina composite particles were synthesized via the sol-gel method to promote fine dispersion and homogenous mixing. Aluminum chloride hydroxide served as the alumina precursor, while amorphous silica, obtained from rice husk, was directly incorporated into the alumina sol. Following synthesis, the material was calcined at 1000 °C, yielding an α-cristobalite form of silica and corundum-phase alumina.

View Article and Find Full Text PDF