98%
921
2 minutes
20
Transformable micro/nanostructures endow optical and mechanical metamaterials with customization and tunability. However, employing existing transformation mechanisms to achieve large mechanical deformations remains challenging due to the restricted displacement in the nanometric scale. Here, we present a transformation strategy using nanoscale kirigami structures with ultrahigh deformability enabled by synthetic designs. Theoretically and experimentally reconfigurable large-range and bi-directional out-of-plane deformations are achieved on combined Archimedean spirals with well-designed length, both of which obtain ultrahigh deformability in aspect ratio. Benefited from the ultrahigh deformability, high-performance optical modulation and high-resolution dynamic information display are experimentally achieved, which are well controlled by the spiral angles of synthetic nano-kirigami arrays with a pitch size of only 2.2 μm. Our strategy enables large deformation of nano-kirigami with exceptional tuning accuracy in a large range, which greatly improves the electromechanical reconfigurability for high-precision miniaturized devices and enables potential applications in information encryption, micro-/nano-opto-electro-mechanical systems (MOEMS/NOEMS), and photonics/phononics.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12373882 | PMC |
http://dx.doi.org/10.1038/s41467-025-63169-9 | DOI Listing |
Lab Chip
September 2025
Department of Electrical & Electronic Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong.
Traditional biophysical cytometry has been limited by its low-dimensional phenotyping characteristics, often relying on only one or a few cellular biophysical phenotypes as readouts. This has perpetuated the perception that biophysical cytometry lacks the power to determine cellular heterogeneity. Here, we introduce a multimodal biophysical cytometry platform, termed quantitative phase morpho-rheological (QP-MORE) cytometry, which simultaneously captures a collection of high-resolution biophysical and mechanical phenotypes of single cells at ultrahigh throughput (>10 000 cells per s).
View Article and Find Full Text PDFRev Sci Instrum
September 2025
National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan.
In this work, we developed a vacuum-compatible long trace profiler (LTP) for in situ metrology of ultra-precise x-ray optics within synchrotron vacuum chambers. Although traditional LTPs operate ex situ under atmospheric pressure, earlier optical setups-such as that by Qian et al.-performed in situ distortion measurements by directing laser beams through vacuum viewports.
View Article and Find Full Text PDFNat Commun
September 2025
Department of Physics, Washington University, St. Louis, MO, USA.
Pressure serves as a fundamental tuning parameter capable of drastically modifying all properties of matter. The advent of diamond anvil cells (DACs) has enabled a compact and tabletop platform for generating extreme pressure conditions in laboratory settings. However, the limited spatial dimensions and ultrahigh pressures within these environments present significant challenges for conventional spectroscopy techniques.
View Article and Find Full Text PDFNat Commun
August 2025
State Key Laboratory of Chips and Systems for Advanced Light Field Display, School of Physics, Beijing Institute of Technology, Beijing, 100081, China.
Transformable micro/nanostructures endow optical and mechanical metamaterials with customization and tunability. However, employing existing transformation mechanisms to achieve large mechanical deformations remains challenging due to the restricted displacement in the nanometric scale. Here, we present a transformation strategy using nanoscale kirigami structures with ultrahigh deformability enabled by synthetic designs.
View Article and Find Full Text PDFInt J Biol Macromol
September 2025
International Center for Interdisciplinary Research and Innovation of Silsesquioxane Science, Key Laboratory of Special Functional Aggregated Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, PR China. Electronic address: liuhongzhi@sd
The functionalized modification of epoxy silsesquioxane (GSQ) with the sodium salt of glutamic acid was successfully achieved via an epoxy-amine click reaction, resulting in the preparation of sodium carboxylate group-rich Glu-GSQ hybrid nanofillers. These hybrid nanofillers were subsequently incorporated into a hydrogel matrix composed of carboxymethyl chitosan and polyacrylamide, leading to the development of a novel PCH-Glu hybrid hydrogel material with enhanced properties. Remarkably, the optimized PCH-Glu3 hybrid hydrogel exhibits exceptional mechanical properties, demonstrating an ultrahigh fracture elongation of 3528 % coupled with a Young's modulus of 9.
View Article and Find Full Text PDF