98%
921
2 minutes
20
Optical absorption and scattering are critical properties of biological tissues, but strong background light often obscures this information, limiting imaging contrast and the visualization of tissue microstructures. Current methods for enhancing imaging contrast rely on image processing and noise suppression, but often lose critical details under strong background light. To address this issue, we propose a dual-modal imaging technique based on a low-rank and sparse matrix decomposition (LRSD) of light fields, enabling simultaneous high-contrast imaging of absorption and scattering and significantly improving imaging performance. Monte Carlo simulation results demonstrate that the low-rank component of the light field effectively separates background light, while the sparse component accurately captures the absorption and scattering properties of the target. In imaging experiments on skin follicle tissues, this method successfully extracted absorption and scattering information, achieving a twofold improvement in imaging contrast, with the SNR improving by 2.97 dB and significantly enhancing the visualization of tissue microstructures. Compared to traditional image filtering methods, the LRSD technique showed superior performance under strong background light conditions. Furthermore, imaging experiments on different regions of rabbit taste bud slices further validated the broad applicability and potential of this method in biological imaging. The high-contrast dual-modal imaging method proposed in this study demonstrates exceptional capabilities in visualizing the tissue structure, offering an innovative solution for the clinical evaluation of pathological sections.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/JOSAA.552041 | DOI Listing |
Langmuir
September 2025
Federal University of São Paulo, Laboratory of Hybrid Materials, Diadema, São Paulo 09913-030, Brazil.
This study demonstrates the successful fabrication of nanostructured Langmuir-Blodgett (LB) films combining the conjugated copolymer poly(9,9-dioctylfluorene--3,4-ethylenedioxythiophene) (PDOF--PEDOT) with spherical and triangular silver nanoparticles (AgNP). The LB technique allowed precise control over the molecular arrangement and distribution of the nanoparticles at the air-water interface, resulting in compact, reproducible and structurally ordered nanocomposite films. The structural and morphological properties of the interfacial monolayers and LB films were investigated using surface pressure-area isotherms, Brewster angle microscopy, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and quartz crystal microbalance.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
National Laboratory of Solid State Microstructures, School of Physics, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China.
For optoelectronic devices based on lead-halide perovskites and other semiconductors, a comprehensive understanding of the electric field influences on the carrier transport characteristics is critical to the optimization of their practical performances. To fulfill this challenging goal, here we have employed photoluminescence spatial image and transient absorption microscopy measurements on an individual CsPbBr microplate biased at external voltages in an Au/CsPbBr/Au device. At the subpicosecond time scale, some photogenerated excitons are dissociated into free electrons and holes that drift toward the electrodes to leave behind unfilled defect sites, which are capable of scattering the residual excitons to yield a reduced diffusion coefficient.
View Article and Find Full Text PDFLangmuir
September 2025
Microelectronics & Nanotechnology-Shamsuddin Research Centre (MiNT-SRC), Universiti Tun Hussein Onn Malaysia, Batu Pahat 86400 Johor, Malaysia.
Achieving a crack-free, high-surface-area photoanode is essential for maximizing the efficiency of dye-sensitized solar cells (DSSCs). In this work, rutile titanium dioxide (rTiO) nanoflowers were synthesized hydrothermally and then conformally coated with copper(I) oxide (CuO) by RF magnetron sputtering to seal pre-existing cracks and to create a nanothorn surface favorable for dye adsorption. Systematic control of the sputtering time identified 60 min as optimal condition, yielding a photoanode thickness of about 6.
View Article and Find Full Text PDFJ Texture Stud
October 2025
Faculty of Chemical-Metallurgical Engineering, Department of Food Engineering, Istanbul Technical University, Sarıyer, Istanbul, Türkiye.
In this study, potato slices were fried in four different vegetable oils (corn, olive, palm olein, and sunflower) to investigate how oil type influences the characteristics of potato chips. The diffusion coefficient of oils was attempted to be correlated with the final moisture, oil uptake, and textural parameters of potato chips. The diffusion coefficients were determined using two approaches.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
L. V. Pisarzhevsky Institute of Physical Chemistry of NASU SE "RADMA", 31, pr. Nauky ave, Kyiv 03680, Ukraine.
The effect of electron irradiation ( = 1.8 MeV) on the optical properties of polyethylene glycol 400-multiwalled carbon nanotube (PEG-400/MWCNT) nanocomposite films was studied within an absorbed dose range of 0 to 0.4 MGy.
View Article and Find Full Text PDF