98%
921
2 minutes
20
Nanotips exhibit a low turn-on field and high emission current density, and are considered promising candidates in future cold-field emitters. However, it is difficult to fabricate an emitter with ultra-fine curvature radius, outstanding collimation and stable interfacial adhesion. In this study, we developed an technique that enables the fabrication of single-crystal hafnium carbide (HfC) nanotips on top of tungsten (W). The single-crystal feature and outstanding collimation of HfC nanotips were confirmed using transmission electron microscopy (TEM). TEM investigation revealed that the HfC nanotip exhibited a typical field-emission turn-on voltage of 128 V (20 nA), and a significant current of ∼230 nA at a low extraction voltage of 149 V, when the distance between the tip and extractor is ∼50 nm. The field enhancement factor of the HfC nanotip was as high as ∼2 × 10 m. These exceptional properties can be attributed to the single-crystal feature, the nanometer-sized apex, the outstanding collimation and the stable interfacial adhesion of the HfC nanotip.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d5nh00143a | DOI Listing |
Nanoscale Horiz
August 2025
College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China.
Nanotips exhibit a low turn-on field and high emission current density, and are considered promising candidates in future cold-field emitters. However, it is difficult to fabricate an emitter with ultra-fine curvature radius, outstanding collimation and stable interfacial adhesion. In this study, we developed an technique that enables the fabrication of single-crystal hafnium carbide (HfC) nanotips on top of tungsten (W).
View Article and Find Full Text PDF