Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Logs supplied in Papua New Guinea and Indonesia are predominantly sourced from fast-growing tree species of plantation forests. The timber primarily consists of sapwood, which is highly susceptible to biodeterioration. At a training center, CCA (chromated copper arsenate) is still used for wood preservation, while in the wood industry, ACQ (alkaline copper quaternary) is commonly applied to enhance the service life of timber. In the future, polystyrene impregnation or other non-biocidal treatments could potentially serve this purpose. This study aimed to determine the discoloration and resistance of polystyrene-impregnated and CCA-preserved woods. Wood samples, and from Papua New Guinea, and and from Indonesia, were used. The wood samples were treated with polystyrene impregnation, CCA preservation, or left untreated, then exposed at the PNG Forest Research Institute site for four months. After treatment, the color change in polystyrene-impregnated wood was minor, whereas CCA-preserved wood exhibited a noticeably different color compared to untreated wood. The average polymer loading for polystyrene-impregnated wood reached 147%, while the average CCA retention was 8.4 kg/m. Densities of untreated-, polystyrene-, and CCA-wood were 0.42, 0.64, and 0.45 g/cm, respectively, and moisture contents were 15.8%, 9.4%, and 13.4%, respectively. CCA preservation proved highly effective in preventing termite attacks; however, CCA is hazardous to living organisms, including humans. Polystyrene impregnation also significantly improved wood resistance to subterranean termites, as indicated by lower weight loss and a higher protection level compared to untreated wood. Additionally, polystyrene treatment is nonhazardous and safe for living organisms, making it a promising option for enhancing wood resistance to termite attacks in the future as an alternative to the biocides currently in use.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12298784PMC
http://dx.doi.org/10.3390/polym17141945DOI Listing

Publication Analysis

Top Keywords

polystyrene impregnation
12
wood
11
polystyrene-impregnated cca-preserved
8
subterranean termites
8
color change
8
papua guinea
8
guinea indonesia
8
wood samples
8
cca preservation
8
polystyrene-impregnated wood
8

Similar Publications

Micro(nano)plastics (MNPs) are pervasive in aquatic environments, with aged MNPs being the predominant form due to environmental weathering. However, their developmental toxicity, particularly regarding skeletal formation, remains poorly understood. In this study, aged polystyrene nanoplastics (PSNPs) were prepared via 48-hour UV irradiation and compared with pristine PSNPs in zebrafish embryo exposures starting within 4 h post-fertilization (hpf) and lasting for 7 days.

View Article and Find Full Text PDF

Early-life microplastic exposure elicits ADHD-like behaviors by disrupting dopaminergic neurodevelopment in zebrafish.

J Hazard Mater

August 2025

Key Laboratory of Neuroregeneration of Jiangsu and Ministry of Education, Co-Innovation Center of Neuroregeneration, NMPA Key Laboratory for Research and Evaluation of Tissue Engineering Technology Products, Jiangsu Clinical Medicine Center of Tissue Engineering and Nerve Injury Repair, Nantong Univ

Microplastics (MPs) are emerging environmental contaminants with potential neurodevelopmental risks. We investigated the effects of early-life exposure to polystyrene microplastics (PS-MPs; 0.1 μm and 5 μm) in zebrafish larvae (from 8 h post-fertilization to 5 days post-fertilization) across a range of concentrations (0, 0.

View Article and Find Full Text PDF

The accumulation of microplastics and nanoplastics in aquatic environments has raised significant concerns in recent years, given the potential health risks to both aquatic ecosystems and humans; due to their nanometer size, they enter the food chain of aquatic species and consequently that of humans too. This study presents an efficient plasmonic photocatalyst for degrading polystyrene nanoplastics (PS NPs), while simultaneously generating green hydrogen in the process. Blank controls show that the presence of PS NPs is necessary for H evolution, since under identical conditions, it does not occur in their absence.

View Article and Find Full Text PDF

Logs supplied in Papua New Guinea and Indonesia are predominantly sourced from fast-growing tree species of plantation forests. The timber primarily consists of sapwood, which is highly susceptible to biodeterioration. At a training center, CCA (chromated copper arsenate) is still used for wood preservation, while in the wood industry, ACQ (alkaline copper quaternary) is commonly applied to enhance the service life of timber.

View Article and Find Full Text PDF

Adsorption of modified polystyrene nanoplastics on biomass-derived activated carbons: A study of ball mill activation.

J Environ Manage

September 2025

Chemical Engineering Department, Universidad Autónoma de Madrid, Campus Cantoblanco, Madrid, 28049, Spain.

This study focuses on synthesizing activated carbons using lignin and sawdust as precursors, with FeCl employed as an activating agent, aimed at adsorbing of modified polystyrene nanoparticles. The impact of ball milling during the impregnation process was evaluated, revealing that the best results were obtained with a milling time of 10 min. This method resulted in activated carbons with enhanced porosity compared to those synthesized without milling.

View Article and Find Full Text PDF