98%
921
2 minutes
20
Introduction: With the increasing use of aeromedical transport for critically ill patients, it is essential to understand the impact of pressure changes on drug infusion delivery systems. As airplanes ascend and descend, gases/bubbles are released from solutions when ambient pressure decreases and dissolves when pressure increases. This may affect mechanical fluid delivery systems and cause clinically significant changes, especially within a critical care setting. We aimed to evaluate the impact of pressure changes on volumetric pumps and syringe drivers.
Methods: An in vitro study of six volumetric pumps and eight syringe drivers was conducted in a hypobaric chamber to mimic pressure changes during flights. Infusion devices were set to deliver water at 0.2 ml ⋅ h-1 and infused volumes were measured. There were 15 open-ended syringes also studied.
Results: During ascent, syringe drivers and volumetric pumps over-delivered 173 µL and 38 µL of fluid. During descent, syringe drivers under-delivered by 166 µL, whereas volumetric pumps under-delivered by 9 µL. Syringe drivers experienced statistically significant changes in fluid delivery during both ascent and descent. In volumetric pumps, only the descent phase infusion differed significantly from other phases. The volume of fluid expansion is dependent on volume and the mechanical properties of the fluid.
Discussion: Decreasing ambient pressure causes bubble formation, which displaces fluid, and increasing ambient pressure causes bubble reabsorption in mechanical infusion devices. Hence, atmospheric pressure changes during air travel may alter fluid delivery from medical fluid delivery systems and affect critically ill patients who require both aeromedical evacuation and accurate infusion of drugs. Fan KS, Paterson M, Shojaee-Moradie F, Manoli A, Edwards V, Lee V, Hutchison E, Gifford RM, Parsons IT, Koehler G, Mathieu C, Mader JK, King BR, Russell-Jones D; EASA Consortium. Performance of fluid infusion systems in the changing atmospheric pressures encountered in aviation. Aerosp Med Hum Perform. 2025; 96(1):4-11.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.3357/AMHP.6477.2025 | DOI Listing |
Lab Chip
August 2025
Department of Bioengineering, Santa Clara University, CA 95053, USA.
The volume of natural materials increases under tension, thus conventionally biomechanical actuation of fluidic pumps relies on compression for pressure generation. Here, we report on out-of-surface microchannels (OSMiCs) that exhibit negative volumetric strain (, pressure generation) under skin-induced tensile strain. Monolithic polydimethylsiloxane (PDMS) patches were fabricated and characterized.
View Article and Find Full Text PDFLab Chip
August 2025
Department of Mechanical Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku-cho, Toyohashi, Aichi 441-8580, Japan.
Accurate and rapid quantification of nucleic acid targets is crucial for molecular diagnostics, particularly in resource-limited settings where simple and robust technologies are required. This study presents a high-throughput digital loop-mediated isothermal amplification (dLAMP) platform for the absolute quantification of nucleic acids in a sample, using a microfluidic device comprising ten thousand nanoliter-scale reaction microchambers. The polydimethylsiloxane (PDMS)-based device achieved complete liquid compartmentalization within 60 s in a single operation using an electronic pipette, without requiring surface modification, pre-degassing, pre-priming, or external pumping systems, which are typically necessary in conventional methods.
View Article and Find Full Text PDFAerosp Med Hum Perform
January 2025
Introduction: With the increasing use of aeromedical transport for critically ill patients, it is essential to understand the impact of pressure changes on drug infusion delivery systems. As airplanes ascend and descend, gases/bubbles are released from solutions when ambient pressure decreases and dissolves when pressure increases. This may affect mechanical fluid delivery systems and cause clinically significant changes, especially within a critical care setting.
View Article and Find Full Text PDFSimul Healthc
July 2025
From the Department of Anesthesiology, Critical Care, and Pain Medicine (S.B.G., N.B.C., A.R.L., K.P., M.M.), Endeavor Health, Evanston, IL; Department of Anesthesiology and Critical Care, Pritzker School of Medicine (S.B.G.), University of Chicago, Chicago, IL; Grainger Center for Simulation and In
Introduction: This study compares 2 commercially available infusion pumps in a simulated cardiac surgical perioperative setting to assess differences in usability, medication errors, and programming workload among experienced and trainee healthcare professionals. Perioperative medications are frequently administered to patients via infusion pumps. Major issues in the perioperative period include medication errors, usability challenges, and workflow inefficiencies.
View Article and Find Full Text PDFChem Commun (Camb)
July 2025
Helmholtz Young Investigator Group Electrocatalysis: Synthesis to Devices, Helmholtz-Zentrum Berlin für Materialien und Energie, 12489 Berlin, Germany.
Hydrogen is considered an attractive energy vector and an indispensable base chemical for a wide variety of chemical products. As more hydrogen is produced electrolysis, finding ways to store the H will become increasingly important due to the low volumetric energy density at ambient pressure. While high pressure storage is favoured for many applications, compressing hydrogen poses distinct challenges due to its low density and high diffusivity.
View Article and Find Full Text PDF