Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Upper-limb occupational exoskeletons reduce injuries during overhead work. Previous studies focused on muscle activation with and without exoskeletons, but their impact on shoulder fatigue remains unclear. Additionally, no studies have explored how exoskeleton support levels affect fatigue. This study investigates the effects of assistive profiles on muscular and cardiovascular fatigue. Electromyographic (EMG) and electrocardiographic signals were collected to compute EMG median frequency (MDF), heart rate (HR), and heart rate variability (HRV). Fatigue was assessed using three MDF and HR metrics: relative change (,), slope (,), and intercept (,) of the linear regression. Results showed decreased 64% ( = 0.0020) with higher assistance compared to no exoskeleton; decreased 40% ( < 0.0273) with lower assistance, decreased up to 67% ( = 0.0039) and by 43% ( < 0.0098) with higher and medium assistance. HRV metrics included root mean square of successive differences (RMSSD) and low-frequency to high-frequency power ratio (LF/HF). RMSSD indicated parasympathetic dominance, while rising LF/HF ratio suggested physiological strain. Findings support occupational exoskeletons as ergonomic tools for reducing fatigue.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12170952PMC
http://dx.doi.org/10.1017/wtc.2025.10008DOI Listing

Publication Analysis

Top Keywords

occupational exoskeletons
8
heart rate
8
fatigue
5
evaluation fatigue
4
fatigue progression
4
progression overhead
4
overhead tasks
4
tasks effects
4
effects exoskeleton
4
assistance
4

Similar Publications

Evaluation of the HAL® lumbar type exoskeleton in long-term care: protocol for a mixed-methods feasibility study.

Front Digit Health

August 2025

Department of Internal Medicine, Faculty of Medicine, University Medicine Halle (Saale), Health Service Research Working Group | Acute Care, Martin Luther University Halle-Wittenberg, Halle (Saale), Germany.

Background: Lower back pain (LBP) is one of the most common occupational health issues among healthcare professionals, particularly in long-term care settings. The HAL® Lumbar Type Exoskeleton is a wearable assistive technology designed to reduce strain on the lower back during physically demanding care activities. However, evidence regarding its feasibility, usability, and acceptance in real-world long-term care settings remains limited.

View Article and Find Full Text PDF

Impact of an occupational back-support exoskeleton on muscle synergies during a pick-up movement.

Eur J Appl Physiol

August 2025

Department of Mechanical Engineering, École de Technologie Supérieure, Montréal, Canada.

Purpose: While passive back-support exoskeletons have been shown to reduce back-muscle activity during laboratory-simulated tasks, their influence on motor control is still unclear. The aim of this study was to investigate the impact of a passive back-support exoskeleton on muscle synergies, the predefined groups of coordinated muscle activations used by the central nervous system to produce natural movements.

Methods: Nineteen participants performed several pick-up tasks with 500 g weights, with and without a back-exoskeleton.

View Article and Find Full Text PDF

Innovative technologies have been helping to improve comfort and safety at work in high-risk sectors for years. The study analysed the impact, along with an assessment of potential implementations (opportunities and limitations) of innovative technological solutions for improving occupational safety in two selected sectors of the economy: mining and construction. The technologies evaluated included unmanned aerial vehicles and inspection robots, the Internet of Things and sensors, artificial intelligence, virtual and augmented reality, innovative individual and collective protective equipment, and exoskeletons.

View Article and Find Full Text PDF

Simulation-based biomechanical assessment of a passive back support exoskeleton: Comparison of various support levels during a sustained forward bending task.

Appl Ergon

August 2025

Department of Environmental and Occupational Health, School of Public Health, Texas A&M University, College Station, TX, USA. Electronic address:

This study evaluated the impacts of five support levels (40, 55, 70, 85, and 100 % actuator strengths) of a passive back-support exoskeleton (BSE) on biomechanical loads associated with commercial crab sorting through musculoskeletal simulation. Whole-body kinematics of 20 male participants performing simulated crab sorting were collected and integrated into a human-BSE interaction simulation framework to predict muscle activity, spinal loads, and contact forces at the human-BSE interfaces. Increasing the BSE support level generally reduced trunk extensor muscle activity (up to 28.

View Article and Find Full Text PDF

Pain or injury to the low back are prevalent among individuals engaged in physically demanding occupations or tasks involving repetitive manual material handling, resulting in significant personal and societal burdens. Exoskeletons have emerged as a promising technology to mitigate the risk of injuries by providing mechanical support and reducing the physical demand on the body. Exoskeleton providers provide minimal information related to the support capability of their product, as many do not publish these magnitudes.

View Article and Find Full Text PDF