Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Untethered robots, compared with their tethered counterparts, may bring enhanced autonomy. It is highly desirable to engineer multifunctional, lightweight, rapid, and low-voltage driven untethered soft robots that have enhanced adaptability and safer interaction capabilities. Here we present an untethered soft robot by a smart integration of 4D printed liquid crystalline elastomer (LCE) actuators with the associated electronics. The LCE artificial muscle, which consists of a modified LCE sandwiched between a polyimide based heating film and a silicone adhesive, not only has adjustable transition temperatures (39-46 °C) and modulus (0.61-2.57 MPa) but also has decent mechanical properties such as adequate rigidity to support certain loads and sufficient propulsive forces (13.7 MPa) to facilitate robotics motions. As a result, we developed an untethered, compact LCE soft robot that is the lightest (overall weight of 9.87g) and the quickest (0.28 body length per minute), and has the lowest cost of transportation (CoT of 7), among all untethered electric-driven LCE robots. The LCE robot can also be used for grasping and demonstrating obstacle crossing capability on challenging terrains.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.5c06159 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Light-driven lattice soft microrobot with multimodal locomotion.
Nat Commun
August 2025
Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074, China.
Untethered microrobots hold significant promise in fields such as bionics, biomedicine, and micromechanics. However, replicating the diverse movements of natural microorganisms in artificial microrobots presents a considerable challenge. This paper introduces a laser-based approach that utilizes lattice metamaterials to enhance the deformability of hydrogel-based microrobots, resulting in untethered light-driven lattice soft microrobots (LSMR).
View Article and Find Full Text PDFTriboelectric self-powered soft robotics: paving the way towards a sustainable future.
Mater Horiz
August 2025
Centre for Flexible Electronics, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Guntur, Andhra Pradesh, India.
The integration of triboelectric nanogenerators (TENGs) into soft robotic systems marks a significant advancement toward autonomous, self-powered, and environmentally responsive machines. TENGs offer lightweight, flexible structures capable of efficiently converting mechanical energy into electricity, supporting both on-board power generation and active sensing. This review provides a comprehensive overview of recent progress in TENG-powered soft robotics, emphasizing developments in actuation, sensing, locomotion, and intelligent interaction.
View Article and Find Full Text PDFA programmable acoustic metamaterial: achieving untethered ultra-broadband modulation with photoactive structural transition.
Mater Horiz
August 2025
Intelligent Materials and Systems Laboratory, Institute of Technology, University of Tartu, Nooruse 1, Tartu 50411, Estonia.
The increasing global concern over low-frequency noise pollution necessitates innovative solutions capable of effective acoustic attenuation across varying environments. However, conventional acoustic metamaterials, characterized by fixed geometries, typically provide limited flexibility in adjusting the functional frequency range once constructed. This study revisited the classic acoustic metamaterial configurations and proposed two novel tunable acoustic absorbing structures through a strategic integration with high-performance photo-active polymer actuators.
View Article and Find Full Text PDFExplosion-powered eversible tactile displays.
Sci Robot
August 2025
Department of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14850, USA.
High-resolution electronic tactile displays stand to transform haptics for remote machine operation, virtual reality, and digital information access for people who are blind or visually impaired. Yet, increasing the resolution of these displays requires increasing the number of individually addressable actuators while simultaneously reducing their total surface area, power consumption, and weight, challenges most evidently reflected in the dearth of affordable multiline braille displays. Blending principles from soft robotics, microfluidics, and nonlinear mechanics, we introduce a 10-dot-by-10-dot array of 2-millimeter-diameter, combustion-powered, eversible soft actuators that individually rise in 0.
View Article and Find Full Text PDFBurrowing and unburrowing in submerged granular media through fluidization and shape-change.
Front Robot AI
July 2025
Department of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, CA, United States.
Subterranean exploration in submerged granular media (GM) presents significant challenges for robotic systems due to high drag forces and the complex physics of GM. This paper introduces a robotic system that combines water-jet-based fluidization for self-burrowing in submerged environments and an untethered, volume-change mechanism for burrowing out. The water-based fluidization approach significantly reduces drag on the robot, allowing it to burrow into GM with minimal force.
View Article and Find Full Text PDF