98%
921
2 minutes
20
Both tin monosulfide (SnS) and tin disulfide (SnS) are thermodynamically stable layered materials with the potential for spin-valleytronic devices and photodetectors. Notably, SnS, owing to its low symmetry, exhibits interesting properties such as ferroelectricity, shift-current, and a persistent spin helix state in the monolayer limit. Unlike SnS, however, creating large-area atomic-thickness crystals of SnS is challenging, owing to the enhanced interlayer interactions caused by lone pair electrons. Here, we demonstrate that p-type SnS can be selectively grown by varying the sulfur vapor concentration relative to tin using high-purity elemental precursors in a chemical vapor deposition setup. Based on that, we further show that monolayer SnS crystals, up to several tens of micrometers in lateral scale, can be obtained by controlled sublimation of bulk SnS crystals. These findings pave the way for device applications based on high-quality tin sulfide.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12203643 | PMC |
http://dx.doi.org/10.1021/acs.nanolett.5c01639 | DOI Listing |
Sci Rep
August 2025
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai, 980-8577, Japan.
Tin sulfide (SnS) is a promising earth-abundant and non-toxic material for photovoltaic applications; however, its practical use has been hindered by difficulties in achieving both stoichiometric composition and large grain sizes in thin films-factors critical for improving device performance. This study presents a unique strategy for fabricating high-quality SnS thin films with controlled stoichiometry and micron-scale grains using a metallic tin target and sulfur plasma (S-plasma). Unlike conventional approaches that rely on toxic H₂S gas, this method employs a S-plasma to enhance sulfur reactivity and mitigate sulfur deficiencies during film deposition.
View Article and Find Full Text PDFLangmuir
August 2025
Department of Physics, National Institute of Technology Meghalaya, Cherrapunji, Meghalaya 793108, India.
The promise of high-efficiency copper zinc tin sulfide or CZTS-based solar cells is hindered by critical challenges such as detrimental defects and problematic interfaces. The conventional ZnS/CZTS junction exhibits a large conduction band offset, leading to a reduced short-circuit current density (), while the open-circuit voltage () remains consistently low. Additionally, the use of a toxic CdS layer raises serious environmental and disposal concerns.
View Article and Find Full Text PDFSci Rep
July 2025
Physics Department, Faculty of Science, Kafrelsheikh University, Kafrelsheikh, 33516, Egypt.
Kesterite materials, especially copper zinc tin sulphide (CZTS), have emerged as very promising solar cell materials because of their sustainability, cost-effectiveness, and environmentally friendly composition. CZTS, composed of abundant and nontoxic elements, stands as a leading candidate among materials for efficient, sustainable, and cost-effective photovoltaic technologies. The " FTO/TiO/CZTS/CuO/Au " solar cell has been simulated using SCAPS-1D, where FTO is the front contact, TiO is the electron transport layer, CZTS is the absorber layer, CuO is the hole transport layer and Au is the back contact, this device presenting an investigation of the structure, material properties, and carrier dynamics of such a device under standard AM 1.
View Article and Find Full Text PDFSmall
July 2025
Faculty of Chemistry, Gdansk University of Technology, Gdansk, 80-233, Poland.
Developing robust and efficient anodes is essential for advancing sodium-ion battery technology. Herein, a systematic investigation of SnS@C composites prepared at different pyrolysis temperatures to elucidate how their structural, surface, and electrochemical properties govern sodium-ion storage is reported. The study reveals that a lower synthesis temperature traps extra sulfur within the carbon matrix, which hampers the complete SnS conversion reaction and Na intercalation processes.
View Article and Find Full Text PDFDalton Trans
August 2025
Department of Chemistry, St John's College, Tirunelveli-627002, Tamil Nadu, India.
Driven by the growing need for cost-effective and efficient energy storage devices, numerous efforts have been devoted to the sustainable design and development of electrode materials. To meet this demand, we propose tin sulfide-manganese sulfide solid solution nanoparticle-based electrodes as a viable solution, operating in conjunction with a cytocompatible phosphate-buffered saline solution as the electrolyte. In this study, the SnMnS solid solution nanoparticles of three different compositions were synthesized using a wet chemical route.
View Article and Find Full Text PDF