Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

This study aims to assess the capability of using a specially designed device to monitor changes in gas concentration (CO, NH, HS, and O) in the atmosphere above the minced beef meat, during storage at refrigerated temperature. With its array of sensing channels, the multi-gas detector device facilitates the detection of precise gas concentrations in sensitive environments, enabling the monitoring of various processes occurring within stored meat. To delve into the connection between microbial activity and gas emissions during storage, fluctuations in microbial populations in the meat were observed, focusing on prevalent meat microbiota such as lactic acid bacteria (LAB) and . A significant reduction of O content in the stored samples was observed after seven days ( < 0.05), while a significant release of CO was detected on the fourth day of storage. Significant changes ( < 0.05) in the gas content were tracked until the 11th day of storage followed by intensive microbial growth. NH and HS levels remained undetectable throughout the experiment. The results showed a correlation between an increase in gas content in the headspace and an increase in the number of LAB and in meat. Modern multi-gas detector devices can indirectly determine microbial contamination in closed meat packaging.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11593233PMC
http://dx.doi.org/10.3390/foods13223553DOI Listing

Publication Analysis

Top Keywords

multi-gas detector
12
minced beef
8
day storage
8
gas content
8
gas
6
meat
6
storage
5
application multi-gas
4
detector monitoring
4
monitoring gas
4

Similar Publications

A multi-gas sensing system based on mid-infrared spectral absorption was developed for the detection of CH, CH, and CH. The system utilized a broadband infrared source, a hollow waveguide (HWG) absorption cell, and a tunable Fabry-Pérot (FP) detector. The limits of detection (LODs) of CH, CH, and CH were 7.

View Article and Find Full Text PDF

This study aims to assess the capability of using a specially designed device to monitor changes in gas concentration (CO, NH, HS, and O) in the atmosphere above the minced beef meat, during storage at refrigerated temperature. With its array of sensing channels, the multi-gas detector device facilitates the detection of precise gas concentrations in sensitive environments, enabling the monitoring of various processes occurring within stored meat. To delve into the connection between microbial activity and gas emissions during storage, fluctuations in microbial populations in the meat were observed, focusing on prevalent meat microbiota such as lactic acid bacteria (LAB) and .

View Article and Find Full Text PDF

CH, CH, and CO Multi-Gas Sensing Based on Portable Mid-Infrared Spectroscopy and PCA-BP Algorithm.

Sensors (Basel)

January 2023

Key Laboratory for Information Science of Electromagnetic Waves (MoE), Fudan University, Shanghai 200433, China.

A multi-gas sensing system was developed based on the detection principle of the non-dispersive infrared (NDIR) method, which used a broad-spectra light source, a tunable Fabry-Pérot (FP) filter detector, and a flexible low-loss infrared waveguide as an absorption cell. CH, CH, and CO gases were detected by the system. The concentration of CO could be detected directly, and the concentrations of CH and CH were detected using a PCA-BP neural network algorithm because of the interference of CH and CH.

View Article and Find Full Text PDF

This study presents a multi-gas analyzer based on tunable filter non-dispersive IR (TF-NDIR) sensors that operate with a wide dynamic range of wavelength and concentration. A pyroelectric sensor coupled with a microsized Fabry-Perot interferometer, namely a tunable filter, enables sensing within a narrowly selected wavelength band. Three detectors capable of tuning the bandpass wavelength with a range of 3.

View Article and Find Full Text PDF
Article Synopsis
  • Hot electron detectors (HEDs) utilize plasmon resonance to improve sensitivity for mid-infrared (MIR) gas detection, overcoming the limitations of semiconductor materials.
  • A new HED design using an Al/GaAs fishnet nanostructure was optimized for MIR sensing, showing significant enhancements in optical and electrical properties compared to traditional detectors.
  • By varying the thickness of the GaAs layer, the detection wavelength can be adjusted, allowing for versatile multi-gas detection and highlighting the potential for more efficient gas detectors in engineering applications.
View Article and Find Full Text PDF