Study on the performance of hydrophilic curing agent and environmentally friendly non-pozzolanic filler for the development of self-curing self-compacting concrete.

Self-compacting concrete (SCC) is often used when compaction is difficult, requiring special attention to the curing process. However, traditional curing methods usually fail in practice. Despite taking precise measures to control water evaporation, surface water on vertical structure elements can still be problematic. To address these challenges, this study seeks to investigate the possibility of creating self-curing self-compacting concrete (SCSCC). Since the curing agent used has a significant impact on the production of SCSCC, this study examines the effects of using polyethylene glycol (PEG), a hydrophilic agent, at varying rates of 0.5%, 1%, 1.5%, and 2% on the fresh, hardened, and durability characteristics of the material. Additionally, to improve the sustainability properties of SCSCC, manufactured sand (M-sand) acquired from crushing rocks is used as a filler. Overall, the results indicate that the use of superplasticizer and M-sand is enough to achieve the required flowability for SCC mixtures without requiring specific fillers, and this method is effective in immediately controlling bleeding and segregation while maintaining the necessary compressive strength at all ages. The hardened properties of SCSCC were found to be improved by increasing the PEG content up to 1.5%, with an optimal range of 0.75% superplasticizer. Furthermore, the results demonstrate that the self-cured specimen, cured with PEG, has greater acid resistance than the conventionally cured one.