A simulation study of MR-guided proton therapy system using iron-yoked superconducting open MRI: a conceptual study.

Radiotherapy platforms integrated with magnetic resonance imaging (MRI) have been significantly successful and widely used in X-ray therapy over the previous decade. MRI provides greater soft-tissue contrast than conventional X-ray techniques, which enables more precise radiotherapy with on-couch adaptive treatment planning and direct tracking of moving tumors. The integration of MRI into a proton beam irradiation system (PBS) is still in the research stage. However, this could be beneficial as proton therapy is more sensitive to anatomical changes and organ motion. In this simulation study, we considered the integration of PBS into the 0.3-T superconducting open MRI system. Our proposed design involves proton beams traversing a hole at the center of the iron yoke, which allows for a reduced fringe field in the irradiation nozzle while maintaining a large proton scan field of the current PBS. The shape of the bipolar MRI magnets was derived to achieve a large MRI field-of-view. To monitor the beam position and size accurately while maintaining a small beam size, the beam monitor installation was redesigned from the current system. The feasibility of this system was then demonstrated by the treatment plan quality, which showed that the magnetic field did not deteriorate the plan quality from that without the magnetic field for both a rectangular target and a prostate case. Although numerous challenges remain before the proposed simulation model can be implemented in a clinical setting, the presented conceptual design could assist in the initial design for the realization of the MR-guided proton therapy.