98%
921
2 minutes
20
Recently, all-solid-state sodium batteries (Na-ASSBs) have received increased interest owing to their high safety and potential of high energy density. The potential of Na-ASSBs based on sodium superionic conductor (NASICON)-structured Na V (PO ) (Na VP) cathodes have been proven by their high capacity and a long cycling stability closely related to the microstructural evolution. However, the detailed kinetics of the electrochemical processes in the cathodes is still unclear. In this work, the sodiation/desodiation process of Na VP is first investigated using in situ high-resolution transmission electron microscopy (HRTEM). The intermediate Na V (PO ) (Na VP) phase with the P2 /c space group, which would be inhibited by constant electron beam irradiation, is observed at the atomic scale. With the calculated volume change and the electrode-electrolyte interface after cycling, it can be concluded that the Na VP phase reduces the lattice mismatch between Na VP and NaV (PO ) (NaVP), preventing structural collapse. Based on the density functional theory calculation (DFT), the Na ion migrates more rapidly in the Na VP structure, which facilitates the desodiation and sodiation processes. The formation of Na VP phase lowers the formation energy of NaVP. This study demonstrates the dynamic evolution of the Na VP structure, paving the way for an in-depth understanding of electrode materials for energy-storage applications.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10646283 | PMC |
http://dx.doi.org/10.1002/advs.202301490 | DOI Listing |
ACS Appl Mater Interfaces
September 2025
National Center for International Research on Catalytic Technology, School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, China.
Bimetallic sulfide is an outstanding pseudocapacitive material with high theoretical specific capacitance and good electronic conductivity. Herein, nickel-cobalt bimetallic sulfide (CoNiS/NiS) nanoframes composed of thin sheets are synthesized from Ni-Co Prussian blue analogues (NiCo-PBA) by an ion exchange method. The influence of sodium sulfide solution concentration on the morphology and supercapacitor (SC) performances of sulfides is systematically investigated.
View Article and Find Full Text PDFTalanta
July 2025
School of Chemistry, Sun Yat-Sen University, Guangzhou, 510275, People's Republic of China; Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, School of Chemistry, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China.
A major obstacle in the development of solid contact ion-selective electrodes (SC-ISEs) is the frequent calibration procedures due to the low reproducibility of standard potential(E) and the unstable signals. To address these challenges, we developed an all-solid state miniature sodium ion-selective electrode (Na-ISE) based on acid-doped poly(3,4-ethylenedioxythiophene)-polystyrene sulphonate (PEDOT: PSS) as the solid contact layer, in combination with an external polarization technique. Acid doping minimized the Coulomb interaction between PEDOT and PSS, inducing significant phase separation and conformational re-aggregation of PEDOT chains, thus creating more contact points to facilitate charge transport and ion-to-electron transduction.
View Article and Find Full Text PDFJ Am Chem Soc
August 2025
Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia.
Sodium metal batteries are a promising low-cost alternative to lithium-based systems, offering abundant raw materials and high energy density. However, their development is hindered by challenges such as dendrite growth and interfacial instability, which compromise safety and cycling performance. To address these issues, we report a new class of fluorinated, ion conducting block copolymer electrolytes designed to self-assemble into well-defined ion transport channels.
View Article and Find Full Text PDFJ Am Chem Soc
June 2025
Shenzhen All-Solid-State Lithium Battery Electrolyte Engineering Research Center, Institute of Materials Research (IMR), Tsinghua Shenzhen International Graduate School, Shenzhen 518055, China.
Sodium-ion batteries (SIBs) offer a sustainable and promising solution for large-scale energy storage because of their low cost and abundant element resources, especially in cold environments, where traditional batteries struggle. The cointercalation chemistry for graphite anode presents a potential avenue due to its fast intercalation kinetics, but it faces significant challenges at low temperatures. Herein, we first unravel a previously overlooked desolvation behavior in the cointercalation system, a key factor in performance decay under low temperatures.
View Article and Find Full Text PDFSens Diagn
August 2025
Department of Inorganic and Analytical Chemistry, University of Geneva Quai E.-Ansermet 30 1211 Geneva 4 Switzerland
Screen printing and inkjet printing are attractive processes to produce low-cost and mass producible electroanalytical sensors. Despite important advances in the field, obtaining a printed electrochemical reference element that satisfies analytical requirements has not yet been realized satisfactorily. This paper investigates the use of screen printing and inkjet printing to produce a self-contained, all-solid state reference element that can be integrated with a wide range of electroanalytical sensing principles.
View Article and Find Full Text PDF