98%
921
2 minutes
20
Spectrum-sensing technology is crucial for the development of underwater acoustic communication networks and plays a key role in detecting spectrum holes and channel occupancy. Energy detection technology, as the fundamental spectrum sensing technology in cognitive radio, has reached a mature level of development. Its application in hydroacoustic communications can significantly enhance the utilization of the hydroacoustic spectrum. However, due to the complexity of the hydroacoustic channel compared with that of the radio channel, the traditional double-threshold energy detection technique faces challenges such as fixed threshold values and limited flexibility. To address this, we propose a model for the hydroacoustic channel that incorporates a weight factor based on the signal-to-noise ratio in the algorithm. This allows for adaptive threshold values based on the user's signal-to-noise environment, reducing false detection rates and improving overall detection performance. Through simulation experiments and comparisons, our proposed signal-to-noise weighted collaborative spectrum-sensing technique demonstrates superior detection performance compared with other spectrum-sensing techniques.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10459267 | PMC |
http://dx.doi.org/10.3390/s23167074 | DOI Listing |
Biol Lett
September 2025
Sea Power Reinforcement·Security Research Department, Korea Institute of Ocean Science & Technology, Busan, Republic of Korea.
Passive acoustic monitoring is an observation method for detecting and characterizing ocean soundscapes, and it has recently been used to observe underwater marine life. The brown croaker () is an important fish species in the Northwest Pacific Ocean that produces biological sounds. In this study, the sounds of 150 adult brown croakers were recorded continuously for three weeks using a self-recording hydrophone.
View Article and Find Full Text PDFJ Acoust Soc Am
September 2025
Department of Physics, University of Louisiana at Lafayette, Lafayette, Louisiana 70503, USA.
A method is presented for determining the significant parameters, maximum wind speed and radius of maximum wind speed, of the surface winds associated with a hurricane. The method is based on Bayesian inversion, using Markov chain Monte Carlo sampling. Underwater acoustic measurements are used to estimate parameters in the axisymmetric Holland model for hurricane surface winds.
View Article and Find Full Text PDFJ Acoust Soc Am
September 2025
Centre de Vision Numérique, CentraleSupélec, Université Paris-Saclay, Inria, Gif-Sur-Yvette, France.
Conventional techniques for underwater source localization have traditionally relied on optimization methods, matched-field processing, beamforming, and, more recently, deep learning. However, these methods often fall short to fully exploit the data correlation crucial for accurate source localization. This correlation can be effectively captured using graphs, which consider the spatial relationship among data points through edges.
View Article and Find Full Text PDFJ Acoust Soc Am
September 2025
IMVIA UR 7535, Université Bourgogne Europe, 21000 Dijon, France.
The narrowband components of ship-radiated noise are critical for the passive detection and identification of ship targets. However, the intricate underwater environment poses challenges for conventional acoustic signal processing methods, particularly at low signal-to-noise ratios. Previous studies have suggested the use of deep learning for denoising, but there is a significant lack of research on underwater narrowband signals.
View Article and Find Full Text PDFBioinspir Biomim
September 2025
Mechanical Engineering, University of California Berkeley, 6177 Etcheverry Hall, Berkeley, California, 94720, UNITED STATES.
Riblets inspired by natural shark skin denticles are widely recognized for their drag-reducing performance. Although previous research has predominantly focused on two-dimensional riblet geometries, three-dimensional topographies remain underexplored due to the complex architecture of denticle-inspired surfaces. Natural riblet arrays, comprising thousands of interconnected denticles, pose challenges in terms of parameterization, simulation, and fabrication.
View Article and Find Full Text PDF