Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

We present a high-energy laser source consisting of an ultrafast thin-disk amplifier followed by a nonlinear compression stage. At a repetition rate of 5 kHz, the drive laser provides a pulse energy of up to 200 mJ with a pulse duration below 500 fs. Nonlinear broadening is implemented inside a Herriott-type multipass cell purged with noble gas, allowing us to operate under different seeding conditions. Firstly, the nonlinear broadening of 64 mJ pulses is demonstrated in an argon-filled cell, showing a compressibility down to 32 fs. Finally, we employ helium as a nonlinear medium to increase the energy up to 200 mJ while maintaining compressibility below 50 fs. Such high-energy pulses with sub-50 fs duration hold great promise as drivers of secondary sources.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.494359DOI Listing

Publication Analysis

Top Keywords

ultrafast thin-disk
8
thin-disk amplifier
8
energy 200
8
nonlinear broadening
8
nonlinear
5
nonlinear pulse
4
pulse compression
4
compression 200
4
200 1 kw
4
1 kw ultrafast
4

Similar Publications

Multipass cells (MPCs) have proven to be a robust and versatile solution for spectral broadening and subsequent compression of high average power Yb-based ultrafast lasers with multi-100 fs pulse durations. However, generating high compression ratios and peak power enhancement at low pulse energies (few-µJ) with compact setups remains challenging because of the moderate peak intensity available for broadening. In this regime, bulk solid-state plates are typically required, and their discrete nature in the nonlinear propagation reduces the B-integral tolerable per pass without beam degradation.

View Article and Find Full Text PDF

We present a comparative study on nonlinear pulse compression of 10 mJ pulses from a thin-disk amplifier at 5 kHz in a multipass cell using both gaseous and bulk nonlinear media. First, we demonstrate compressibility from 465 fs to 34 fs in an argon filled multipass cell. We then replace the nonlinear medium by bulk material and operate in vacuum.

View Article and Find Full Text PDF

We demonstrate the generation of stable femtosecond vortices from a self-started Kerr-lens mode-locked Yb:YAG thin-disk oscillator. By using a defective mirror inscribed with a fine line, 218-fs Hermite-Gaussian (HG) pulses are delivered directly from the thin-disk oscillator with an average power of 12 W at the repetition rate of 105 MHz and subsequently converted to Laguerre-Gaussian (LG) vortices by a cylindrical-lens mode-converter. The average output power of the Hermite-Gaussian pulses is further improved to 19 W by applying a rectangular aperture.

View Article and Find Full Text PDF

We present the highest, to the best of our knowledge, average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the tilted pulse front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk ytterbium (Yb) amplifier. We study repetition rate-dependent effects in our setup at 100 and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and are thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times.

View Article and Find Full Text PDF

Dual-comb lasers are a new class of ultrafast lasers that enable fast, accurate and sensitive measurements without any mechanical delay lines. Here, we demonstrate a 2-µm laser called MIXSEL (Modelocked Integrated eXternal-cavity Surface Emitting Laser), based on an optically pumped passively modelocked semiconductor thin disk laser. Using III-V semiconductor molecular beam epitaxy, we achieve a center wavelength in the shortwave infrared (SWIR) range by integrating InGaSb quantum well gain and saturable absorber layers onto a highly reflective mirror.

View Article and Find Full Text PDF