98%
921
2 minutes
20
Biochar (e.g. pyrochar and hydrochar) is considered a promising adsorbent for Cd removal from aqueous solution. Considering the vastly different physicochemical properties between pyrochar and hydrochar, the Cd sorption capacity and mechanisms of pyrochars and hydrochars should be comparatively determined to guide the production and application of biochar. In this study, the hydrochars and pyrochars were prepared from Napier grass by hydrothermal carbonization (200 and 240 °C) and pyrolysis (300 and 500 °C), respectively, and the physicochemical properties and Cd sorption performances of biochars were systematically determined. The pyrochars had higher pH and ash content as well as better stability, while the hydrochars showed more oxygen-containing functional groups (OFGs) and greater energy density. The pseudo second order kinetic model best fitted the Cd sorption kinetics data of biochars, and the isotherm data of pyrochar and hydrochar were well described by Langmuir and Freundlich models, respectively. In comparison with hydrochar, the pyrochar exhibited better Cd sorption capacity (up to 71.47 mg/g). With increasing production temperature, the Cd sorption capacity of pyrochar elevated, while the reduction was found for hydrochar. The mineral interaction, complexation with surface OFGs, and coordination with π electron were considered the main mechanisms of Cd removal by biochars. The minerals interaction and the complexation with OFGs was the dominant mechanism of Cd removal by pyrochars and hydrochars, respectively. Therefore, the preparation technique and temperature have significant impacts on the sorption capacity and mechanisms of biochar, and pyrochar has better potential for Cd removal than the congenetic hydrochar.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chemosphere.2022.136389 | DOI Listing |
Food Res Int
November 2025
College of Food Science and Engineering, Northwest A&F University, Yangling 712100, Shaanxi, China. Electronic address:
Development of effective, safe, and degradable food packaging is essential to meet the demands of consumers and to ensure the continued growth of the food industry. In this study, superabsorbent bioactive aerogels based on cellulose and polyvinyl alcohol combined with the antibacterial bioactive extracts extracted from Portulaca oleracea were fabricated for the preservation of chilled meats. The main physicochemical and mechanical properties of the bioactive aerogels were characterized and evaluated.
View Article and Find Full Text PDFPestic Biochem Physiol
November 2025
National Engineering Laboratory for Efficient Utilization of Soil and Fertilizer Resources, Key Laboratory of Agricultural Environment in Universities of Shandong, College of Resources and Environment, Shandong Agricultural University, 61 Daizong Road, Tai'an 271018, PR China. Electronic address: wj
Difenoconazole (DFC) is a commonly used triazole fungicide known for its high efficiency and environmental persistence. A thorough understanding of its environmental behavior, particularly sorption in soil, is critical to obtain a comprehensive assessment of the ecological risk of DFC. In this study, three soils with distinct physicochemical properties (brown soil, cinnamon soil, and fluvo-aquic soil) were used to elucidate the adsorption mechanisms of DFC on soil.
View Article and Find Full Text PDFArch Environ Contam Toxicol
September 2025
N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences, 20 Nikolsky Avenue, Arkhangelsk, 163020, Russian Federation.
This paper presents the results of a study of the physicochemical conditions and contamination of a peat deposit in a representative northern boreal bog with the persistent organic pollutants (POPs), hexachlorobenzene (HCB), pentachlorobenzene (PeCB), and pentachlorophenol (PCP), as well as compounds from another organochlorine compounds, the chlorinated phenols (CPs). Despite the remoteness from the industrial sources of these compounds, a wide range of the organochlorine compounds were detected in the studied peat deposit. The maximum concentrations of HCB, PeCB, and PCP reached 9.
View Article and Find Full Text PDFLangmuir
September 2025
College of Metallurgical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China.
In this study, a novel As(V) ion-imprinted and 4-picolinic acid (4-PA)-grafted porous diatomite (DE)-based adsorbent (As(V)-IID) was prepared by using the surface ion imprinting technique. The results of the selective adsorption experiment show that the adsorption capacity of As(V) on As(V)-IID reaches 62.78 mg/g in a solution with an initial As(V) concentration of 25 mg/L and a pH value that is near pH 4.
View Article and Find Full Text PDFSmall
September 2025
Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, M5S 3G8, Canada.
In pursuit of lightweight, functional thermoplastic materials, novel monolithic aerogels composed entirely of poly(methyl methacrylate) (PMMA) and its stereocomplex crystals are reported. Herein, PMMA aerogels are fabricated using a one-pot thermoreversible gelation procedure, coupled with supercritical CO (scCO) drying. These aerogels exhibit either mixed macro- and mesoporous, or exclusively mesoporous character, with low densities (0.
View Article and Find Full Text PDF