Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Volcanic ashes (VA) are one of the by-products of explosive volcanic eruptions. They can be used as a soil stabilizer due to their cementitious properties as an eco-friendly soil stabilization approach. In this study, the impact of VA as an additive material (up to 20%) was investigated on the behavior of a clayey soil under one-dimensional compression tests and uniaxial compression tests. To this aim, the VA percentage effect, curing conditions, i.e. the optimum moisture content (OMC) and saturated sample, and curing time, on the oedometer modulus, and the uniaxial compression strength (UCS) are investigated. Results show that the addition of VA increases the UCS continuously in saturated conditions. However, this improvement is considerable for 5% additional VA at the OMC state and it induces 325% improvement in UCS. The maximum improvement of UCS occurs at 20% addition of VA in saturated condition. It was also revealed that VA-soil mixtures are more sustainable at low stress levels and the oedometer modulus increases with the VA addition. A long-term curing time leads to an increase of the fabricated bonds due to the pozzolanic reaction. Additional VA has no significant effect on the consolidation parameters specifically for short-term curing time.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9411114PMC
http://dx.doi.org/10.1038/s41598-022-18767-8DOI Listing

Publication Analysis

Top Keywords

curing time
12
one-dimensional compression
8
compression tests
8
uniaxial compression
8
oedometer modulus
8
improvement ucs
8
behavior volcanic
4
volcanic ash-soil
4
ash-soil mixtures
4
mixtures one-dimensional
4

Similar Publications

Background and objectives With the continuous presence of microflora, saliva, and frequent intake of coloured food, the colour stability of any aesthetic material may become compromised. Hence, the present study was conducted to evaluate the influence of tea, coffee, and turmeric solutions on the colour stability of commercially available heat-cured and autopolymerizing denture base acrylic resins as well as a soft lining material. Methods Twenty-four rectangular samples measuring 20 mm × 15 mm × 2 mm were prepared for each type of test material.

View Article and Find Full Text PDF

Tires are complex polymeric materials composed of rubber elastomers (both natural and synthetic), fillers, steel wire, textiles, and a range of antioxidant and curing systems. These constituents are distributed differently among the various tire parts, which are classified based on their function and proximity to the rim. This study presents a rapid and sensitive approach for the characterization of tire components using mild thermal desorption/pyrolysis (TDPy) coupled to direct analysis in real-time mass spectrometry (DART-MS).

View Article and Find Full Text PDF

Plasmids are commonly employed in the delivery of clustered regularly interspaced shortpalindromic repeats (CRISPR)/CRISPR-associated (Cas) components for genome editing. However, the absence of heritable plasmids in numerous organisms limits the development of CRISPR/Cas genome editing tools. Moreover, cumbersome procedures for plasmid construction and curing render genome editing time-consuming.

View Article and Find Full Text PDF

Encampment Medicine: Innovating Care Delivery in a Community of Tiny Shelters on Veterans Affairs Grounds.

Psychiatr Serv

September 2025

Center for the Study of Healthcare Innovation, Implementation, and Policy, Health Systems Research (HSR), U.S. Department of Veterans Affairs (VA) Greater Los Angeles Healthcare System, Los Angeles.

Veterans experiencing homelessness face barriers to traditional U.S. Department of Veterans Affairs (VA) care, even when temporarily housed on VA grounds.

View Article and Find Full Text PDF

Water resistance and hydration mechanism of phosphogypsum cemented paste backfill under composite curing agent modification.

Environ Res

September 2025

School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China; Key Laboratory of Safe and Green Mining of Metal Mines with Cemented Paste Backfill, National Mine Safety Administration, University of Science and Technology Beijing, Beijing 100083, Chi

Cemented paste backfill has made outstanding contributions to the large-scale consumption of phosphogypsum (PG), but poor water resistance significantly weakens the mechanical strength, promotes the leaching of total soluble phosphate (TP) and fluoride ions (F), and reduces its attractiveness in mine engineering. This research synthesized a curing agent (CA) using sodium methylsilicate, sodium silicate, and polyaluminum chloride (PAC). PG produced from Deyang Haohua Qingping Phosphate Mine Co.

View Article and Find Full Text PDF