Novel Poly(ester amide) Membranes with Tunable Crosslinked Structures for Nanofiltration.

Tuning the crosslinking density of interfacial-polymerized nanofiltration (NF) membranes varying from loose to dense structures can make them meet the demand of various applications. The properties (e.g., pore size and porosity) of NF membranes can be tuned by choosing monomers with different structures and reactivities. Herein, tris(hydroxymethyl)aminomethane (THAM), a low-cost and green monomer, is first employed for the preparation of poly(ester amide) (PEA) thin-film composite membranes via interfacial polymerization. The moderate reactivity of THAM enables rational regulation of the crosslinking density of PEA membranes from loose to dense structures by varying the THAM concentration, which can hardly be achieved for traditional polyamide or polyester membranes. The developed PEA membranes with a wide tunability range of crosslinking densities broaden their potential utility in NF. PEA membranes with dense structures show exceptional desalination performance with a water permeance of 11.1 L m h bar and a NaSO rejection of 97.1%. However, loose PEA membranes exhibit good dye/salt separation performance with a dye removal rate over 95.0% and negligible NaCl rejection (<7.5%), as well as high water permeance (>45 L m h bar). This work implies that PEA membranes with tunable crosslinked structures provide new possibilities for the development of task-specific separation membranes.