98%
921
2 minutes
20
In the quest for efficient use of solar energy to produce high-value-added chemicals, we first achieved the photoelectrochemical (PEC) diketonization of naphthalene, using a BiVO/WO photoanode, to obtain naphthoquinone, an important pharmaceutical raw material with excellent efficiency by solar energy conversion. In the electrochemical (EC) reaction using F-doped SnO (FTO) substrates and a 0.5 M HSO HO-acetone (60 vol %) mixed solution containing 5 mM naphthalene, we produced a small amount of naphthoquinone evolution in the dark. However, naphthoquinone (η)'s Faradic efficiency and its evolution rate at 1.7 V were only 28.5% and 0.48 μmol·cm·h, respectively. The PEC reaction using a WO photoanode had very low efficiency for naphthalene diketonization, with low η and evolution rate values at 1.1 V of 0.3% and 0.039 μmol·cm·h, respectively. In contrast, the BiVO/WO photoanode strongly enhanced the PEC reaction, and the η and evolution rates at 1.1 V were boosted up to 37.5% and 4.7 μmol·cm·h, respectively. The evolution rate of the PEC reaction in the BiVO/WO photoanode was 10 times higher than that of the EC reaction with the FTO substrate regardless of the very low bias voltage. This result suggests that the BiVO-based photoanode was very efficient for the selective oxidation of naphthalene even in acid media because of the acetone-mixed electrolyte's anti-photocorrosion effect and the multilayering of WO and BiVO. At a naphthalene concentration of 20 mM, the naphthoquinone evolution rate reached its maximum value of 7.1 μmol·cm·h. Although η tended to decrease with the increase in the electric charge, it reached 100% at a low bias voltage of 0.7 V. An intensity-modulated photocurrent spectroscopy analysis indicated the rate constant of charge transfer at the photoanode surface to the naphthalene molecules was strongly enhanced at a low bias voltage of 0.7-1.1 V, resulting in the high η value. The acid-resistant BiVO/WO photoanode functioned in acetone-mixed electrolytes enabled the realization of a new PEC oxidation reaction driven by solar energy to produce high-value-added pharmaceutical raw materials.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.1c16777 | DOI Listing |
Phys Chem Chem Phys
July 2025
School of Chemistry and Life Resources, Renmin University of China, Beijing 100872, P. R. China.
Combining tungsten trioxide (WO) with bismuth vanadate (BiVO) to form a heterojunction photoanode offers a promising solution to achieving highly efficient photoelectrocatalytic (PEC) performances. In this work, we successfully fabricated the WO/BiVO heterojunction on tungsten (W) foil a hydrothermal route, followed by a successive ionic layer adsorption and reaction (SILAR) process. The PEC performances for synergetic H evolution and organic pollutant degradation were significantly enhanced after the BiVO nanoparticles were loaded on the WO photoanode.
View Article and Find Full Text PDFNanomaterials (Basel)
June 2025
Cold Region Wetland Ecology and Environment Research Key Laboratory of Heilongjiang Province, Harbin University, Harbin 150086, China.
The rational design of photoanode materials is pivotal for advancing photoelectrochemical (PEC) water splitting toward sustainable hydrogen production. This review highlights recent progress in the machine learning (ML)-assisted development of nanostructured metal oxide photoanodes, focusing on bridging materials discovery and device-level performance optimization. We first delineate the fundamental physicochemical criteria for efficient photoanodes, including suitable band alignment, visible-light absorption, charge carrier mobility, and electrochemical stability.
View Article and Find Full Text PDFACS Appl Energy Mater
April 2025
Centre of Polymer Systems, Tomas Bata University in Zlin, Tr. T. Bati 5678, 760 01 Zlin, Czech Republic.
The development of highly efficient photoanodes is crucial for enhancing the energy conversion efficiency in photoelectrochemical water splitting. Herein, we report an innovative approach to fabricating an Au/BiVO/WO ternary junction that leverages the unique benefits of WO for efficient electron transport, BiVO for broadband light absorption, and Au nanoparticles (NPs) for surface plasmon effects. The BiVO/WO binary junction was constructed by depositing a BiVO layer onto the surface of the WO nanobricks via consecutive drop casting.
View Article and Find Full Text PDFChem Sci
May 2025
Department of Chemistry, Molecular Science Research Hub, Imperial College London White City London W12 0BZ UK
Due to their complementary absorption characteristics and band energy structure, the BiVO-coated WO heterojunction architecture is commonly employed as a metal oxide photoanode for the water oxidation half-reaction. The energy level ordering results in a staggered heterojunction that can effectively separate photoexcited electrons into the WO layer towards the current collector and photoexcited holes into the BiVO layer towards the interface with the electrolyte. Chemical vapour deposition (CVD) is an upscalable technique for fabricating large-area thin films of a wide range of semiconductors with nanoscale control.
View Article and Find Full Text PDFACS Omega
March 2025
Department of Physical Chemistry, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Naugarduko 24, LT-03225 Vilnius, Lithuania.
As the environment becomes increasingly polluted, there is a pressing need for the development of effective remediation technologies, particularly in the area of wastewater treatment. Recently, there has been growing interest in advanced oxidation systems (AOSs) based on renewable solar energy. This study focuses on the investigation of photoelectrochemical (PEC) AOSs using WO and WO/BiVO photoanodes and an environmentally friendly aqueous sulfate electrolyte for visible light-induced decomposition of pharmaceutical compounds, namely, diclofenac (DCF), amoxicillin (AMX), and tetracycline (TCC).
View Article and Find Full Text PDF