98%
921
2 minutes
20
Glycoproteins play vital roles in living organisms and often serve as biomarkers for some disease. However, due to the low content of glycoprotein in biological fluids, selective detection of glycoproteins is still a challenging issue that needs to be addressed. In this study, molecularly imprinted colloidal array with multi-boronic acid sites for glycoprotein detection under physiological pH was proposed. Monodispersed glycoprotein imprinted particles (SiO@PEI/MIPs) was first prepared based on surface imprinting strategy using horseradish peroxidase (HRP) as template, and polyethyleneimine (PEI) was used to increase the number of boronic acid groups. The binding experiment indicated that the SiO@PEI/MIPs hold satisfactory adsorption capacity (1.41 μmol/g), rapid adsorption rate (40 min) and preferable selectivity toward HRP. Then the SiO@PEI/MIPs was assembled into close-packed colloidal array to construct a label free optical sensor (denoted as GICA). Benefiting from the high ordered photonic crystal structure, binding of HRP onto the GICA could be directly readout from the changes in structure color and diffracted wavelength. The structure color of the GICA changed from bright blue to yellow with the diffraction wavelength red shifted 59 nm when the HRP concentration increased from 2.5 to 15 μmol/L. Importantly, the GICA was capable of detecting HRP from human serum samples. All those results indicated the potential of the GICA for naked-eye detection of glycoprotein.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jcis.2021.09.048 | DOI Listing |
J Colloid Interface Sci
September 2025
Center for Innovative Materials and Architectures, Ho Chi Minh City 700000, Viet Nam; Vietnam National University, Ho Chi Minh City 700000, Viet Nam. Electronic address:
Organic nucleophile-assisted natural seawater electrolysis has emerged as a promising strategy for green hydrogen production by significantly reducing energy consumption. Among Ni-based electrocatalysts, NiMoO has drawn attention for its activity in both oxygen evolution reaction (OER) and urea oxidation reaction (UOR). However, its practical application is hindered by severe surface passivation, particularly at industrial current densities (e.
View Article and Find Full Text PDFJ Colloid Interface Sci
August 2025
State Key Laboratory of Molecular Engineering of Polymer, Department of Macromolecular Science and Laboratory of Advanced Materials, Fudan University, Shanghai 200433, PR China. Electronic address:
Supramolecular colloidal photonic crystals possess the advantages of both photonic crystals and supramolecular materials to prepare dynamically reversible structural color materials with high flexibility, functionality and recyclability. However, the driving force for the ordered arrangement of colloidal nanoparticles is limited since the significant increase of the viscosity in the system, consequently the shear-induced technique with complicated equipment needs to be applied to achieve the assembly of colloidal nanoparticles. Herein, we report a local stress-assisted assembly strategy for fabricating high-performance supramolecular colloidal photonic crystal films without the need of complex shearing equipment.
View Article and Find Full Text PDFNat Commun
August 2025
Key Laboratory of Applied Surface and Colloid Chemistry of Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Key Laboratory of New Concept Sensors and Molecular Materials, Shaanxi Normal University, Xi'an, Shaanxi, PR China.
Excitation-dependent multicolor emission from a single-component system, independent of aggregation, remains a fundamental challenge due to inherent difficulties in innovative principles. Herein, we propose a molecular symmetry-breaking strategy to enrich electronic processes, enabling the molecule to exhibit excitation-dependent multicolor emissions from one chemical entity. A star-shaped molecule, 1,3,5-(4-tert-butylphenyl-o-carboranyl-4-phenyl)benzene (Ph-3CP) is designed, where spatial restriction induces inequivalence among three bulky, non-planar branches.
View Article and Find Full Text PDFSci Adv
August 2025
Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA 90089, USA.
Liquid metal-based stretchable electronics offer high electrical performance and seamless integration with deformable systems but face challenges in achieving scalable, high-resolution patterning. In this work, we present a method for micropatterning liquid metal particle (LMP) films with feature sizes as small as 5 micrometers by integrating electrostatically enabled colloidal self-assembly and microtransfer printing. The resulting cold-welded LMP micropatterns exhibit exceptional electromechanical properties, high conductivity (2.
View Article and Find Full Text PDFNano Lett
August 2025
School of Optical and Electronic Information, Huazhong University of Science and Technology (HUST), Wuhan, Hubei 430074, People's Republic of China.
Solution-processed PbSe colloidal quantum dots (CQDs) are promising candidates for building high-performance infrared photodetectors due to their widely tunable band gaps and high carrier mobility. However, the development of PbSe CQD photodetectors has been hampered by their poor electronic properties. In this work, a monomer-assisted ligand exchange (MLE) strategy was developed that leads to PbSe CQDs with improved electronic properties including increased carrier mobility, extended carrier lifetime, and enhanced electronic uniformity.
View Article and Find Full Text PDF