Oligothiophene Phosphonic Acids for Self-Assembled Monolayer Field-Effect Transistors.

ACS Appl Mater Interfaces

Organic Materials & Devices, Institute of Polymer Materials, Department of Materials Science, Friedrich-Alexander-Universität Erlangen-Nürnberg, IZNF, Cauerstraße 3, 91058 Erlangen, Germany.

Published: July 2021


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Semiconducting self-assembled monolayers (SAMs) represent highly relevant components for the fabrication of organic thin-film electronics because they enable the precise formation of active π-conjugates in terms of orientation and layer thickness. In this work, we demonstrate self-assembled monolayer field-effect transistors (SAMFETs) composed of phosphonic acid oligomers of 3-hexylthiophene (oligothiophenes-OT) with systematic variations of thiophene repeating units (5, 10, and 20). The devices exhibit stable lateral charge transport with increased mobility as a function of thiophene unit counts. Importantly, our work reveals the packing and intermolecular order of varied-chain-length SAMs at the molecular scale via X-ray reflectivity (XRR) and quantitative X-ray photoelectron spectroscopy (XPS). Short oligomers (OT5-PA and OT10-PA) arrange almost perpendicular to the substrate, forming highly ordered SAMs, whereas the long-chain OT20-PA exhibits a folded structure. By tuning the molecular order in the monolayers via the SAM substitution reaction, the OT20-PA devices show a tripling in mobility.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.1c05764DOI Listing

Publication Analysis

Top Keywords

self-assembled monolayer
8
monolayer field-effect
8
field-effect transistors
8
oligothiophene phosphonic
4
phosphonic acids
4
acids self-assembled
4
transistors semiconducting
4
semiconducting self-assembled
4
self-assembled monolayers
4
monolayers sams
4

Similar Publications

Bifunctional integration of indoor organic photovoltaics (OPVs) and photodetectors (OPDs) faces fundamental challenges because of incompatible interfacial thermodynamics: indoor OPVs require unimpeded charge extraction under low-light conditions (200-1000 lx), whereas OPDs require stringent suppression of noise current. Conventional hole transport layers (HTLs) fail to satisfy these opposing charge-dynamic requirements concurrently with commercial practicality (large-area uniformity, photostability, and cost-effective manufacturability). This study introduces benzene-phosphonic acid (BPA)-a minimalist self-assembled monolayer (SAM)-based HTL with a benzene core and phosphonic acid anchoring group-enabling cost-effective synthesis and excellent ITO interfacial properties such as energy alignment, uniform monolayer, and stability.

View Article and Find Full Text PDF

"Silatranization": Surface modification with silatrane coupling agents.

Adv Colloid Interface Sci

August 2025

Cracow University of Technology, Faculty of Chemical Engineering and Technology, Department of Biotechnology and Physical Chemistry, Warszawska 24, 31-155 Cracow, Poland; Photo4Chem, Lea 114, 30-133 Cracow, Poland; Photo HiTech Ltd., Bobrzyskiego 14, 30-348 Cracow, Poland. Electronic address: joanna

Silatranization, a specialized variant of silanization using silatrane compounds, is emerging as a powerful strategy to functionalize material surfaces. Compared to conventional silane coupling agents, silatranes exhibit remarkable hydrolytic stability and enhanced resistance to self-condensation, enabling controllable, water-independent formation of a polysiloxane self-assembled monolayer. This review critically examines the unique structure of silatranyl cages, emphasizing how the intramolecular N->Si bond and chelate effect modulate the silicon center's reactivity toward hydroxyl-decorated surfaces.

View Article and Find Full Text PDF

Self-assembled thin films respond to external loads via surface instabilities that are critical to their functionality in both biology and technology. Lipid monolayers at the air-liquid interface are one such system. Tunability between out-of-plane buckling (e.

View Article and Find Full Text PDF

A π-Conjugated Molecular Bridge Strategy for Constructing Efficient Hole Transport Pathways in Inverted Perovskite Solar Cells.

Angew Chem Int Ed Engl

September 2025

Key Lab for Special Functional Materials of Ministry of Education, National & Local Joint Engineering Research Center for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, and Collaborative Innovation Center of Nano Functional Materials and Application

Metal halide perovskite solar cells (PSCs) hold promise for next-generation photovoltaics but are restricted by suboptimal efficiency and poor long-term stability. In inverted PSC architectures, self-assembled monolayers (SAMs) are widely employed as hole-selective layers (HSLs) due to their favorable energy-level alignment and negligible parasitic absorption. However, traditional SAMs often exhibit weak intermolecular interactions, leading to film aggregation, poor interfacial contact, and severe nonradiative recombination.

View Article and Find Full Text PDF

Self-assembled monolayers (SAMs) of alkanethiols on gold surfaces are important for various technological applications, such as electroanalytical sensors, organic electronic devices, and catalysts. However, providing a consistent computational description of the unique structural features of these SAMs, such as adsorption patterns, chain conformations, and superlattice arrangements, is challenging, particularly within a versatile computational framework that can simulate both the structural features of these systems and their irradiation-driven chemical transformations. This study systematically analyzes molecular mechanics force field parameters for bonded and nonbonded (van der Waals and electrostatic) interactions in alkanethiol SAMs with different terminal groups.

View Article and Find Full Text PDF