98%
921
2 minutes
20
Background: The aim of this randomized controlled trial was to evaluate the capability of an IOS (Intra Oral Scanner) device, used in standardized conditions, to detect margins of abutments prepared with knife-edge finishing line located at three different levels in relation to the gingival sulcus.
Methods: sixty abutment teeth for treatment with full crowns were selected and randomly divided in three groups accordingly to the depth of the finishing line: Group A: supragingival margin; Group B: 0.5-1.0 mm into the sulcus; Group C: 1.5-2.0 mm into the sulcus. Temporary crowns were placed for two weeks and then digital impressions (Aadva IOS 100, GC, Japan) were made of each abutment. As controls, analog impressions were taken, poured, and scanned using a laboratory scanner (Aadva lab scanner, GC, Japan). Two standard tessellation language (STL) files were generated for each abutment, subsequently processed, and superimposed by Exocad software (Exocad GmbH, Darmstadt, Germany), applying the "best-fit" algorithm in order to align the scan of the conventional with the digital impressions. The distances between each preparation margin and the adjacent gingival tissue were measured. Four measures were taken, two interproximally and buccally, for a total of six measures of each abutment considering three modes of impressions. The data were statistically evaluated using two-way analysis of variance (ANOVA) for each site and the Bonferroni test.
Results: there was no difference between the two kinds of impression in Group A in both sites, in Group B a difference of 0.483 mm and 0.682 mm at interproximal and buccal sites, respectively, and in Group C 0.750 mm and 0.964 mm at interproximal and buccal sites, respectively. The analysis performed on a site level (mesial/distal/vestibular) for the depth of both vertical preparations revealed significant differences ( < 0.0001). After a post hoc analysis (Bonferroni), vestibular sites of the shallow vertical preparations resulted in significantly lower values compared to the other sites prepared deeply.
Conclusions: the results showed that the location of the margin is an important factor in making a precise and complete impression when IOS (Intra Oral Scanner) is used. Moreover, deep preparation into the sulcus is not recommended for IOS (Intra Oral Scanner) impressions.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7957624 | PMC |
http://dx.doi.org/10.3390/jcm10050941 | DOI Listing |
BMC Pulm Med
August 2025
Department of Microbiology, Sister Nivedita University, Kolkata, India.
Background: Impulse Oscillometry (IOS) helps understanding the mechanical properties of the respiratory system. Evaluating its role in distinguishing Obstructive Airway Disease (OAD) from Restrictive Lung Disease (RLD) remains underexplored.
Methods: We included the consecutive patients of both OAD (asthma and COPD), ILD (representing RLD) observing guideline recommendations and a cohort of 'healthy' subjects (asymptomatic, no disease clinico-radiologically and on spirometry).
J Dent
August 2025
Shanghai Perio-Implant Innovation Center, Institute for Integrated Oral, Craniofacial and Sensory Research, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China; College of Stomatology, Shanghai Jiao Tong University, National Center of Stomatology, National Clin
Purpose: To present a novel digital method to evaluate dynamic computer-assisted implant surgery (dCAIS) accuracy comparing digital implant planning to real implant position.
Methods: Twenty patients in need of implant supported single unit-crowns (SUC), were consequently treated following a standardized digital protocol encompassing (1) a diagnostic digital intra-oral scan (IOS), (2) a cone beam computed tomography (CBCT), (3) 3D digital implant planning, (4) dynamic navigated implant placement (X-Guide, X-Nav Technologies, LLC, Lansdale, PA, USA) and (5) a post-operative IOS with the scan body in situ. Implant position accuracy was evaluated by superimposing the post-operative IOS with the pre-operative digital planning and calculating the resulting angular deviation (), global head deviation (mm) and global tip deviation (mm).
BMC Oral Health
July 2025
School of Stomatology, Department of Prosthodontics, Lanzhou University, Lanzhou, 730000, China.
Background: Intraoral scanners (IOS) offer advantages in implant dentistry, but accuracy depends on factors including implant scan body (ISB) material and implant angulation. Conflicting evidence exists on the performance of Titanium (Ti) versus PEEK ISBs, especially with angulated implants. This study aimed to evaluate the combined effect of ISB material (PEEK vs.
View Article and Find Full Text PDFStatement Of Problem: While intraoral scanners (IOS) demonstrate high accuracy in single-tooth and partial-arch applications, their reliability in full-arch scans with varying edentulous spans remains uncertain. Increasing span length may compromise scanning accuracy and prosthetic outcomes.
Objectives: To assess the influence of edentulous span length on the accuracy of two IOS devices Primescan (Dentsply Sirona) and Trios 3 (3Shape) in complete-arch scenarios.
BMC Oral Health
July 2025
Faculty of Dentistry Department of Prosthodontics, Yeditepe University, Istanbul, Türkiye.
Purpose: This study aimed to evaluate the effect of cavity depth on the accuracy of intraoral scanners (IOS) in intra-coronal restorations, focusing on trueness and precision as defined by International Organization for Standardization (ISO) 5725 standards.
Materials And Methods: Three intra-coronal cavity designs with depths of 2.5 mm (n = 10), 5 mm (n = 10), and 7.