Non-monotonic contribution of nonionic surfactant on the retention of functionalized multi-walled carbon nanotubes in porous media.

J Hazard Mater

School of Environmental Science and Engineering, Guangdong Provincial Key Lab for Environmental Pollution Control and Remediation Technology, Sun Yat-sen University, Guangzhou 510006, PR China; Guangdong Laboratory for Lingnan Modern Agriculture, College of Natural Resources and Environment, South C

Published: April 2021


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

The concentration of nonionic surfactants like Triton X-100 (TX100) can influence the transport and fate of emerging contaminants (e.g., carbon nanotubes) in porous media, but limited research has previously addressed this issue. This study investigates the co-transport of functionalized multi-walled carbon nanotubes (MWCNTs) and various concentrations of TX100 in saturated quartz sand (QS). Batch experiments and molecular dynamics simulations were conducted to investigate the interactions between TX100 and MWCNTs. Results indicated that the concentration ratio of MWCNTs and TX100 strongly influences the dispersion of MWCNTs and interaction forces between MWCNTs and QS during the transport. Breakthrough curves of MWCNTs and TX100 and retention profiles of MWCNTs were determined and simulated in column studies. MWCNTs strongly enhanced the retention of TX100 in QS due to the high affinity of TX100 for MWCNTs. Conversely, the concentration of TX100 had a non-monotonic impact on MWCNT retention. The maximum transport of MWCNTs in the QS occurred at an input concentration of TX100 that was lower than the critical micelle concentration. This suggests that the relative importance of factors influencing MWCNTs changed with TX100 sorption. Results from interaction energy calculations and modeling of competitive blocking indicate that the predictive ability of interaction energy calculations and colloid filtration theory may be lost because TX100 mainly altered intermolecular forces between the MWCNT and porous media. This study provides new insights into the co-transport of surfactants and MWCNTs in porous media, which can be useful for environmental applications and risk management.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2020.124874DOI Listing

Publication Analysis

Top Keywords

porous media
16
carbon nanotubes
12
mwcnts
12
tx100
11
functionalized multi-walled
8
multi-walled carbon
8
nanotubes porous
8
tx100 mwcnts
8
mwcnts tx100
8
concentration tx100
8

Similar Publications

SnS (tin disulfide) is a promising anode active material for lithium-ion batteries (LIBs) due to its high theoretical capacity and low material cost. Conventional synthesis methods, such as solvothermal, hydrothermal, and solid-state, require long synthesis times, the use of solvents and surfactants, and several separation steps. However, the preparation of coated SnS composites using liquid media is even more complex, requiring suitable precursors, compatible solvents, and potentially several steps.

View Article and Find Full Text PDF

Porous Environmental Polarity as a Critical Descriptor for Efficient Proton Conductivity in Metal-Organic Frameworks.

Langmuir

September 2025

Key Laboratory of Green Chemical Media and Reactions (Ministry of Education), Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, School of Chemistry and Chemical Engineering, Henan Normal University, Xinxiang, Henan 453007, P. R. China.

Recent years have witnessed growing research interest in proton-conducting metal-organic frameworks (MOFs) owing to the characteristics of highly ordered pores, oriented packing of crystals, and particularly designable structures. However, how to construct a suitable microenvironment in MOF pores to form optimal proton transport pathways remains challenging. In this study, four MOFs with similar porous diameters but different microenvironments have been screened to study how porous environments influence proton conduction for the first time.

View Article and Find Full Text PDF

Vertical cutoff wall is widely used as one of the in-situ remediation technologies for contaminated sites. In this paper, considering the unsaturated characteristics of porous media, a three-dimensional pollutant transport model of inner aquifer-vertical cutoff wall-outer aquifer is established. The main conclusions are as follows.

View Article and Find Full Text PDF

Electrosensitive hydrogels are smart biomaterials that swell, shrink, deform, and bend when an external electric field is applied. These hydrogels have enormous potential for the controlled therapeutic delivery of biochemical substances to the affected area, thus promoting tissue regeneration. Computational modeling and simulation approaches have provided researchers with cost-effective predictive models that can be used to optimize and experimental protocols.

View Article and Find Full Text PDF

Streamlined Sample Cleanup: Small Molecule Fractionation and Extraction Via Low-Volume Polymer Monolithic Columns for In-Line Analysis.

J Chromatogr Sci

August 2025

Metabolomics and Analytics Centre, Leiden Academic Centre for Drug Research, Leiden University, Einsteinweg 55 2333CC Leiden, The Netherlands.

Polymer monoliths are stationary-phase materials for liquid chromatography and solid-phase extraction. Their porous structure, tuneability and simple synthesis enable tailoring to specific analysis requirements in analytical chemistry. Typically, polymer monoliths are used to separate larger biomolecules.

View Article and Find Full Text PDF