Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

This study aims to discuss the synthesis and fabrication of SnO-InO-based thick-films and their biosensing applications. The structural characterization of SnO-InO nanocomposites was performed using X-ray diffraction, Raman spectroscopy and transmission electron microscopy. Furthermore, the screen-printing technology was used in the fabrication of conductive electrodes to form an interdigitated capacitive structure, and the sensor layer based on the mixture of SnO and InO. Moreover, the sensing performance of the developed structure was tested using () and () bacteria. In addition, the validation of sensing characteristics was performed by electrochemical impedance spectroscopic and self-resonant frequency analysis. Finally, the sensing properties were analyzed for two consecutive days, and changes in both and pathogens growing media were also studied.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7664183PMC
http://dx.doi.org/10.3390/s20216323DOI Listing

Publication Analysis

Top Keywords

interdigitated capacitive
8
sno ino
8
performances biosensing
4
biosensing mechanisms
4
mechanisms interdigitated
4
capacitive sensors
4
sensors based
4
based hetero-mixture
4
hetero-mixture sno
4
ino study
4

Similar Publications

The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision. While flexible pressure-sensing insoles show clinical potential, their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity (R > 0.99 up to 1 MPa) in conventional designs.

View Article and Find Full Text PDF

Three-electrode miniaturized interdigitated system (IDEs) for electrochemical measurements with enhanced sensitivity and performance was reported here. The system included a reference electrode, a counter electrode, and a working electrode, all configured as interconnected electrodes. Present work focused on optimizing the number of working electrodes and their geometric parameters to achieve peak performance, with bench marking system Potassium Ferricyanide.

View Article and Find Full Text PDF

Non-faradaic electrochemical biosensor based on APTES-modified core-shell silica nanoparticles.

Bioelectrochemistry

February 2026

Department of Biomedical Technology, College of Applied Medical Sciences, King Saud University, P.O. Box 10219, Riyadh 11433, Saudi Arabia; King Salman Center for Disability Research, Riyadh 11614, Saudi Arabia; Biological and Environmental Sensing Research Unit, King Abdullah Institute for Nanotech

Here, SiO nanoparticles-based biosensors were developed for the non-faradaic EIS detection of human cytomegalovirus which is responsible for newborn babies' disability. Mesoporous SiO nanoparticles were fabricated through sol-gel approach using anionic surfactant with an average size of 144 ± 18.6 nm.

View Article and Find Full Text PDF

Textile-Based Ti3C2 MXene Capacitor by Laser Ablation Patterning.

ChemistryOpen

August 2025

Department of Chemistry, Materials and Chemical Engineering "Giulio Natta", Politecnico di Milano, Via Mancinelli 7, 20131, Milano, Italy.

E-textile technologies are quickly advancing, but the power supply is still one of the limiting factors, particularly for those integrated into textiles. There is a pressing demand for flexible textile-based microdevices capable of storing and supplying energy. In this work, it is demonstrated that laser ablation (LA) can be conveniently used to achieve patterned thin film electrodes with interdigitated configuration on TPU-coated cotton fabric to produce textile-based energy storage units.

View Article and Find Full Text PDF

Detecting volatile organic compounds (VOCs) is essential for health, environmental protection, and industrial safety. VOCs contribute to air pollution, pose health risks, and can indicate leaks or contamination in industries. Applications include air quality monitoring, disease diagnosis, and food safety.

View Article and Find Full Text PDF