98%
921
2 minutes
20
Dermorphin is a peptide with analgesic actions similar to morphine, but with greater effect and less potential to cause tolerance. The use of dermorphin has been documented in race horses, and its use in humans has already been reported. Considering the potential advantages from the use of dermorphin over morphine, a method to monitor it, and its main metabolite dermorphin (1-4) in humans becomes necessary for doping control. Here, we present two orthogonal methods for this purpose: a high-throughput liquid chromatography coupled to high-resolution mass spectrometry (HRMS) as an initial testing procedure and liquid chromatography-tandem mass spectrometry (MS/MS) in the selected reaction monitoring (SRM) acquisition mode for a confirmation procedure. For urine samples, pretreatment through a mixed-mode weak cation-exchange solid-phase extraction emerged as an effective approach to extract peptides from the biological sample. For the HRMS analysis, a full-MS scan acquisition mode was selected to detect the exact masses of dermorphin and dermorphin (1-4) at m/z 803.37226 and 457.20816, respectively. The SRM method used in the MS/MS confirmation protocol presented high specificity and sensitivity. The selected product ions for dermorphin were 602.2, 202.1 and 574.3 and for dermorphin (1-4) were 207.1, 223.1, and 235.1. Both methods were evaluated for specificity, repeatability, carryover, matrix effects, and recovery. No carryover and matrix effects were detected. The limit of detection for initial testing procedure and the limit of identification for confirmation procedure was 2.5 ng/ml. Also, specificity and robustness were acceptable for the application. Together, the developed methods proved to be efficient for the analysis of dermorphin and metabolite for human doping control purpose.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/jms.4593 | DOI Listing |
Small
September 2025
School of Materials Science and Engineering, Beihang University, Beijing, 100191, China.
Thermoelectric technology has significant applications in waste heat harvesting and temperature control of electronic devices. PbS has long been seen as a robust candidate for large-scale thermoelectric applications due to its low cost and high mechanical strength. However, the low ZT near room temperature hinders its further application.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
September 2025
State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates, South China University of Technology, Guangzhou, 510640, China.
Reverse intersystem crossing (RISC) process is critical for thermally activated delayed fluorescence (TADF) materials to realize spin-flip of triplet excitons in organic light-emitting diodes (OLEDs), but the RISC processes of most TADF materials are not fast enough, undermining electroluminescence (EL) efficiency stability and operational lifetime. Herein, a symmetry breaking strategy to accelerate RISC processes is proposed. By designing asymmetric electron-withdrawing backbone consisting of benzonitrile and xanthone/thioxanthone groups, two new asymmetric TADF molecules, 4tCzCN-pXT and 4tCzCN-pTXT, with multiple 3,6-di-tert-butylcarbazole donors are successfully developed.
View Article and Find Full Text PDFDrug Test Anal
September 2025
Department of Laboratory Medicine, Karolinska Institute, Stockholm, Sweden.
Dried blood spots (DBS) have emerged as a promising complement, and in some settings, an alternative, to urine for anabolic androgenic steroid (AAS) testing, offering advantages such as minimal invasiveness, simplified storage, and transportation. This study evaluated two DBS collection devices-cellulose-based Capitainer-B50 and polymer-based Tasso-M20-and compared results with traditional urine analysis. Ten self-reported AAS users were recruited and provided matched urine and DBS samples.
View Article and Find Full Text PDFAppl Radiat Isot
September 2025
Kahramanmaraş İstiklal University, Department of Energy Systems Engineering, Kahramanmaraş, Türkiye.
The rapid advancement of three-dimensional (3D) printing technologies has significantly expanded their potential applications such as sensors and detector technology. In this study, the gamma-ray shielding performance of ulexite-doped composite resins fabricated via Digital Light Processing (DLP) 3D printing was experimentally investigated to evaluate radiation attenuation capacity. Composite resins containing different ulexite loadings (0, 1, 3, and 5 wt%) were exposed to gamma rays at energies of 356, 662, 1173, and 1333 keV to evaluate their attenuation characteristics.
View Article and Find Full Text PDFACS Nano
September 2025
Frontiers Science Center for Transformative Molecules, State Key Laboratory of Synergistic Chem-Bio Synthesis, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China.
Dynamic micro/nano-structured surfaces play pivotal roles in biological systems and engineering applications. Despite considerable progress has been made in fabricating precisely ordered architectures, achieving controlled motion in top-down fabricated structures remain a formidable challenge. Here, we introduce an advanced dynamic micron-nano optical platform featuring hierarchical microscale wrinkles integrated with ordered nanoscale arrays.
View Article and Find Full Text PDF