98%
921
2 minutes
20
Fantastic structures in nature have inspired much incredible research. Wood, a typical model of anisotropy and hierarchy, has been widely investigated for its mechanical properties and water extraction abilities, although applications in biological areas remain challenging. Delignified wood composite with in situ deposited hydroxyapatite (HAp) and infiltrated polycaprolactone (PCL) is hereby fabricated in an attempt to mimic natural bone. The inherent structure and properties of wood are carefully preserved during the fabrication, showing anisotropic mechanical properties in the radial direction (420 MPa) and longitudinal direction (20 MPa). In addition, it also performs directional liquid transport, effectively inducing the migration and alignment of cells to simulate the uniform seeding behavior of various cells in natural bone. Moreover, the synergistic effect of blended HAp and PCL largely promotes cell proliferation and osteogenic differentiation, providing a promising candidate for bone regeneration materials.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.0c00646 | DOI Listing |
Immun Ageing
September 2025
Department of Biomedical Data Sciences, Molecular Epidemiology, LUMC, Leiden, The Netherlands.
The MetaboHealth score is an indicator of physiological frailty in middle aged and older individuals. The aim of the current study was to explore which molecular pathways co-vary with the MetaboHealth score. Using a Luminex cytokine assay and liquid chromatography-mass spectrometry-based proteomics we explored the plasma proteins associating with the difference in 100 extreme scoring individuals selected from two large population cohorts, the Leiden Longevity Study (LLS) and the Rotterdam Study (RS), and discordant monozygotic twin pairs from the Netherlands Twin Register (NTR).
View Article and Find Full Text PDFMed Eng Phys
October 2025
Ansys Inc., Houston, TX 77094, USA.
Introduction: Benchtop and animal models have traditionally been used to study the propagation of Onyx Liquid Embolic Systems (Onyx) used in the treatment of brain arteriovenous malformations (AVM). However, such models are costly, do not provide sufficient detail to elucidate how variations in Onyx viscosity alter flow dynamics, and rely on some trial-and-error, resulting in elongated timelines for product development.
Objectives: The goal of this study was to leverage Computational Fluid Dynamics (CFD) simulations to predict the behavior of different Onyx formulations.
Proc Natl Acad Sci U S A
September 2025
Soft Matter Sciences and Engineering, CNRS, École supérieure de Physique et de Chimie Industrielles de la Ville de Paris, Université Paris Sciences et Lettres, Sorbonne Université, Paris 75005, France.
The sliding motion of aqueous droplets on hydrophobic surfaces leads to charge separation at the trailing edge, with implications from triple-line friction to hydrovoltaic energy generation. Charges deposited on the solid surface have been attributed to ions or electrons ripped off from the liquid drop. However, the dynamics and exact physicochemical nature of these surface-trapped charges remains poorly explored.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
Department of Chemistry, University of Wisconsin-Madison, 1101 University Ave., Madison, Wisconsin 53706, United States.
Slippery liquid-infused porous surfaces (or "SLIPS") can prevent bacterial surface fouling, but they do not inherently possess the means to kill bacteria or reduce cell loads in surrounding media. Past reports show that the infused liquids in these materials can be leveraged to load and release antimicrobial agents, but these approaches are generally limited to the use of hydrophobic agents that are soluble in the infused oily phases. Here, we report the design of so-called "proto-SLIPS" that address this limitation and permit the release of highly water-soluble (or oil-insoluble) agents.
View Article and Find Full Text PDFAdv Mater
September 2025
Center for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW, 2007, Australia.
Global water scarcity demands next-generation desalination technologies that transcend the limitations of energy-intensive processes and salt accumulation. Herein, a groundbreaking interfacial solar steam generation system capable of simultaneous hypersaline desalination and ambient energy harvesting is introduced. Through hierarchical hydrogel architecture incorporating a central vertical channel and radial channels with gradient apertures, the design effectively decouples salt transport and water evaporation: solar-driven fluid convection directs water outward for evaporation, while inward salt migration prevents surface crystallization and redistributes excess heat.
View Article and Find Full Text PDF