Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

We present an advanced optical-trapping method that is capable of trapping arbitrary shapes of transparent and absorbing particles in air. Two parabolic reflectors were used to reflect the inner and outer parts of a single hollow laser beam, respectively, to form two counter-propagating conical beams and bring them into a focal point for trapping. This novel design demonstrated high trapping efficiency and strong trapping robustness with a simple optical configuration. Instead of using expensive microscope objectives, the parabolic reflectors can not only achieved large numerical aperture (N.A.) focusing, but were also able to focus the beam far away from optical surfaces to minimize optics contamination. This design also offered a large free space for flexible integration with other measuring techniques, such as optical-trapping Raman spectroscopy, for on-line single particle characterization.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.27.033061DOI Listing

Publication Analysis

Top Keywords

parabolic reflectors
12
particles air
8
air parabolic
8
hollow laser
8
laser beam
8
optical-trapping particles
4
reflectors hollow
4
beam advanced
4
advanced optical-trapping
4
optical-trapping method
4

Similar Publications

Focusing ability of electrically large graphene-dielectric-graphene reflector at microwaves analysed using method of analytical regularization.

Philos Trans A Math Phys Eng Sci

August 2025

Electrical and Electronics Engineering Deparment, Dokuz Eylul University, Buca, Izmir 35160, Turkey.

The studied geometry is a two-dimensional thin dielectric parabolic reflector, sandwiched between graphene. It is illuminated by an E-polarized electromagnetic plane wave. The goal is to determine the focusing ability, scattering and absorption characteristics of such a composite reflector depending on the problem parameters.

View Article and Find Full Text PDF

Optimized Quasi-Optical Mode Converter for in 210 GHz Gyrotron.

Micromachines (Basel)

March 2025

College of Electronics and Information Engineering, Shenzhen University, Shenzhen 518060, China.

This article discusses the design of a high-performance quasi-optical mode converter for the TE33,12 mode at 210 GHz. The conversion process is challenging due to a caustic-to-cavity radius ratio of approximately 0.41.

View Article and Find Full Text PDF

Spot-size converters (SSCs) are key for efficient coupling of light between waveguides of different sizes. While adiabatic tapers are well suited for small size differences, they become impractically long for expansion factors around ×100, which are often required when coupling integrated waveguides and free-space beams. Evanescent couplers and Bragg deflectors can be used in this scenario, but their operation is inherently limited in bandwidth.

View Article and Find Full Text PDF

This study focuses on the simulation of a solar photocatalytic reactor with linear parabolic reflectors and continuous fluid flow. The simulation approach was initially validated against experimental data reported by Miranda-Garcia et al. Catal Today 151:107-113 (2010), yielding a high degree of accuracy of approximately 0.

View Article and Find Full Text PDF

This study investigates a comprehensive enhancement strategy for photovoltaic (PV) panel efficiency, focusing on increasing electrical output through the integration of parabolic reflectors, advanced cooling mechanisms, and thermoelectric generation. Parabolic reflectors are implemented in the system to maximize solar irradiance on the PV panel's surface, while a specialized cooling system is introduced to regulate temperature distribution across the silicon layer. This cooling system consists of a finned duct filled with paraffin (RT35HC) and enhanced with SWCNT nanoparticles, which improve the thermal properties of the paraffin, facilitating more effective heat dissipation.

View Article and Find Full Text PDF