98%
921
2 minutes
20
Dye-sensitized solar cells (DSSCs) have been intensely researched for more than two decades. Electrolyte formulations are one of the bottlenecks to their successful commercialization, since these result in trade-offs between the photovoltaic performance and long-term performance stability. The corrosive nature of the redox shuttles in the electrolytes is an additional limitation for industrial-scale production of DSSCs, especially with low cost metallic electrodes. Numerous electrolyte formulations have been developed and tested in various DSSC configurations to address the aforementioned challenges. Here, we comprehensively review the progress on the development and application of electrolytes for DSSCs. We particularly focus on the improvements that have been made in different types of electrolytes, which result in enhanced photovoltaic performance and long-term device stability of DSSCs. Several recently introduced electrolyte materials are reviewed, and the role of electrolytes in different DSSC device designs is critically assessed. To sum up, we provide an overview of recent trends in research on electrolytes for DSSCs and highlight the advantages and limitations of recently reported novel electrolyte compositions for producing low-cost and industrially scalable solar cell technology.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6631186 | PMC |
http://dx.doi.org/10.3390/ma12121998 | DOI Listing |
Langmuir
September 2025
Microelectronics & Nanotechnology-Shamsuddin Research Centre (MiNT-SRC), Universiti Tun Hussein Onn Malaysia, Batu Pahat 86400 Johor, Malaysia.
Achieving a crack-free, high-surface-area photoanode is essential for maximizing the efficiency of dye-sensitized solar cells (DSSCs). In this work, rutile titanium dioxide (rTiO) nanoflowers were synthesized hydrothermally and then conformally coated with copper(I) oxide (CuO) by RF magnetron sputtering to seal pre-existing cracks and to create a nanothorn surface favorable for dye adsorption. Systematic control of the sputtering time identified 60 min as optimal condition, yielding a photoanode thickness of about 6.
View Article and Find Full Text PDFPhys Chem Chem Phys
September 2025
Key Laboratory of Cluster Science of the Ministry of Education, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 100081, China.
Our work aims to understand and reveal the origin of sensitization differences among newly designed dye sensitizers with conjugated and non-fully conjugated π-linker structures, further ascertaining how to improve the power conversion efficiency of dye-sensitized solar cells (DSSCs) by regulating π-linkers. The processes of intramolecular electron excitation transfer, interfacial electron injection, dye regeneration and charge recombination are comprehensively investigated by density functional theory calculations in chloroform and acetonitrile to predict the photoelectric performance of the new dye sensitizers we designed. These dyes can help DSSCs achieve large open-circuit voltage and short-circuit current density, indicating their excellent photovoltaic performance.
View Article and Find Full Text PDFJACS Au
August 2025
Department of Energy Conversion, Institute of Physical and Theoretical Chemistry, Technische Universität Braunschweig, Rebenring 31, 38106 Braunschweig, Germany.
We report the design and synthesis of two novel phenanthroline-based ligands, a catechol-functionalized derivative (: 4,7-(4-catechol)-2,9-dimethyl-1,10-phenanthroline) ligand and its methoxy analogue (). These ligands were used to prepare four Cu-(I) complexes: two homoleptic bis-diimine Cu-(I) complexes ( and ) and two xantphos-based heteroleptic diimine-diphosphine derivatives ( and ). Their photophysical and electrochemical properties were characterized by steady-state and time-resolved spectroscopy, cyclic voltammetry, and density functional theory (DFT) calculations.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Republic of Korea.
This paper reports improvements made to the performance of single-walled carbon nanotube (SWNT) electrodes by integrating a glycerol-doped PEDOT:PSS (PEGL) layer, resulting in a novel material termed SWGL. The PEGL layer addresses key challenges in SWNT electrodes, including poor adhesion, low work function, and limited catalytic activity, by acting as an adhesive interface, carrier injection layer, and catalyst. Through a series of spin-coating and rinsing processes, SWGL films are prepared, exhibiting significantly improved adhesion to inorganic substrates, enhanced electrical conductivity, and stability under thermal treatment.
View Article and Find Full Text PDFRSC Adv
August 2025
Microwave Physics and Dielectrics Department, Physics Research Institute, National Research Centre 33 El Behooth St., Dokki Giza Egypt.
Nanocomposites based on nanolignin (NL) and polypyrrole (PPy) are prepared oxidation polymerization. The chemical structure of the obtained nanocomposites was studied using FTIR and XRD and their morphology was studied by SEM. Broadband dielectric spectroscopy (BDS) was used to study the electrical and dielectric properties of the nanocomposites.
View Article and Find Full Text PDF