Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
The construction of multilayered films with tunable properties could offer new routes to produce biomaterials as a platform for 3D cell cultivation. In this study, multilayered films produced with five bilayers of chitosan and alginate (CHT/ALG) were built using water-soluble modified mesyl and tosyl⁻CHT via layer-by-layer (LbL) self-assembly. NMR results demonstrated the presences of mesyl (2.83 ppm) and tosyl groups (2.39, 7.37 and 7.70 ppm) in the chemical structure of modified chitosans. The buildup of multilayered films was monitored by quartz-crystal-microbalance (QCM-D) and film thickness was estimated using the Voigt-based viscoelastic model. QCM-D results demonstrated that CHT/ALG films constructed using mesyl or tosyl modifications (mCHT/ALG) were significantly thinner in comparison to the CHT/ALG films constructed with unmodified chitosan ( < 0.05). Adhesion analysis demonstrated that human adipose stem cells (hASCs) did not adhere to the mCHT/ALG multilayered films and formed aggregates with sizes between ca. 100⁻200 µm. In vitro studies on cell metabolic activity and live/dead staining suggested that mCHT/ALG multilayered films are nontoxic toward hACSs. Multilayered films produced via LbL assembly of ALG and off-the-shelf, water-soluble modified chitosans could be used as a scaffold for the 3D aggregates formation of hASCs in vitro.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6418967 | PMC |
| http://dx.doi.org/10.3390/polym9090440 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Applications of electron channeling pattern for the determination of wafer offcut and misorientation angles.
Micron
September 2025
IMEC, Kapeldreef 75, Leuven 3001, Belgium.
The epitaxial growth of semiconductor multilayers often starts from monocrystalline wafers that have an offcut angle. This offcut angle is critical for tailoring the properties of epitaxial materials, making its precise control essential. This study demonstrates a novel approach to determine the wafer offcut angle based on electron channeling patterns (ECP) obtained by scanning electron microscopy.
View Article and Find Full Text PDFAll-Water-Based Nanofabrication of Multilayer Biopolymer/Inorganic Reflectors with Reconfigurable Structural Color Patterns.
ACS Nano
September 2025
Department of Biomedical Engineering, Tufts University, Medford, Massachusetts 02155, United States.
Achieving high performance nanoscale photonic functionalities remains extraordinarily challenging when using naturally derived biomaterials. The ability to manipulate ultrathin films of structural proteins─combined with photolithographic control of their polymorphism─unlocks a compelling route toward engineering biopolymer-based photonic crystals with precisely defined photonic bandgaps and reconfigurable structural colors. In this work, we describe a robust, water-based fabrication process for silk/inorganic hybrid one-dimensional (1D) photonic crystals that overcomes many of the conventional difficulties in ensuring reproducibility, uniformity, and reliability at the nanoscale.
View Article and Find Full Text PDFChemically Recyclable and Tunable Polyolefin-Like Multiblock Copolymer Adhesives.
Angew Chem Int Ed Engl
September 2025
Department of Chemistry, Colorado State University, Fort Collins, CO 80523, USA.
Adhesives are important in creating multilayer products, such as in packaging and construction. Most current hot-melt adhesives such as poly(ethylene-co-vinyl acetate) (EVA) and polyurethanes lack chemical recyclability and do not easily de-bond, complicating recycling. Here, we achieved tunable adhesive properties of chemically recyclable polyolefin-like multiblock copolymers through regulating the incorporation of crystalline hard blocks, amorphous soft blocks, and ester content highlighted by adhesive strengths up to 6.
View Article and Find Full Text PDFSustainable, High Barrier Smart Packaging Films for Shelf-Life Extension of Edible Oils.
ACS Appl Bio Mater
September 2025
Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur campus, Saharanpur, 247001, Uttar Pradesh India.
Smart packaging is revolutionizing the food industry by extending shelf life and enhancing quality, thus ensuring food safety and sustainability. This study presents innovative multilayer flexible packaging films to tackle the environmental challenges of single-use plastics and nonrecyclable metalized multilayer films. The fabricated films comprise three layers made up of poly(lactic acid) (PLA), poly(vinyl alcohol)/natural rubber latex, and PLA/Sepiolite clay from inner to outer, respectively, where the active middle layer provides oxygen-scavenging activity.
View Article and Find Full Text PDFPerformance of piezoelectric and triboelectric transducers under gait loading for energy harvesting and load monitoring in total knee replacements.
Nano Energy
August 2025
Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA.
This study investigates the energy harvesting and sensing capabilities of piezoelectric nanogenerators (PENG) and triboelectric nanogenerators (TENG) for long-term load monitoring in total knee replacement (TKR). Multi-layered polyvinylidene fluoride (PVDF) films and cuboid-patterned silicone rubber embedded with dopamine-coated BaTiO particles (SR/BT@PDA) TENG are compared as energy harvesting-based load sensors. Unlike prior studies relying on simplified harmonic loading, this work utilizes physiologically relevant gait cycles covering realistic force ranges to precisely evaluate electrical output, sensitivity, and activity recognition capabilities.
View Article and Find Full Text PDF