Green multi-functional monomer based ion imprinted polymers for selective removal of copper ions from aqueous solution.

Green ion imprinted polymers (IIPs) were prepared in aqueous phase via the synergy of three functional monomers of low-cost eco-friendly gelatin (G), 8-hydroxyquinoline (HQ) and chitosan (C), namely G-HQ-C IIPs, and were applied as an effective and recyclable adsorbent to remove Cu(II) from aqueous solution. The as-prepared G-HQ-C IIPs were systematically characterized, and several major factors affecting adsorption capacity including solution pH, temperature and contact time were investigated in detail. The adsorption of Cu(II) on G-HQ-C IIPs followed the pseudo-second-order kinetic and Langmuir isotherm models, and the adsorption capacity increased with temperature increase. Moreover, the maximum adsorption capacities of G-HQ-C IIPs toward Cu(II) reached up to 111.81 mg/g at room temperature, much higher than those of most of the reported adsorbents for Cu(II). The G-HQ-C IIPs displayed excellent selectivity against seven common divalent ions with selectivity coefficients above 18.71, as well as high anti-interference ability. Additionally, a good reusability was demonstrated without significant loss in adsorption capacity after at least ten cycles. The IIPs were applied to environmental water samples for selective removal of Cu(II) with satisfactory results. By replacing Cu(II) template by Cd(II), Hg(II) and Pb(II), respectively, the obtained three kinds of IIPs based on G-HQ-C presented convincing imprinting properties, and therefore the work could provide a simple and general imprinting strategy toward various concerned heavy metal ions through multi-point interactions from multiple functional monomers.