Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Low-temperature-processed perovskite solar cells (PSCs), especially those fabricated on flexible substrates, exhibit device performance that is worse than that of high-temperature-processed PSCs. One of the main reasons for the inferior performance of low-temperature-processed PSCs is the loss of photogenerated electrons in the electron collection layer (ECL) or related interfaces, i.e., indium tin oxide/ECL and ECL/perovskite. Here, we report that tailoring of the energy level and electron transporting ability in oxide ECLs using Zn2SnO4 nanoparticles and quantum dots notably minimizes the loss of photogenerated electrons in the low-temperature-fabricated flexible PSC. The proposed ECL with methylammonium lead halide [MAPb(I0.9Br0.1)3] leads to fabrication of significantly improved flexible PSCs with steady-state power conversion efficiency of 16.0% under AM 1.5G illumination of 100 mW cm(-2) intensity. These results provide an effective method for fabricating high-performance, low-temperature solution-processed flexible PSCs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.jpclett.6b00295 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Silicon-Perovskite Tandem Solar Cells: An Alternative to the Market-Dominated Silicon-Based Solar Cell Technology.
ACS Appl Mater Interfaces
September 2025
Advanced Materials and Devices Metrology Division, CSIR-National Physical Laboratory, K.S. Krishnan Marg, Pusa Road, New Delhi 110012, India.
Among all types of tandem solar cells (TSCs), the two-terminal (2T) monolithic silicon-perovskite TSCs have achieved an efficiency of approximately 34.85% and show potential for commercialization because they align with well-established silicon-based solar cell technology. This review focuses on 2T monolithic silicon-perovskite TSCs, discussing their deployment along with related technical and scientific issues.
View Article and Find Full Text PDFImmersed Halide Perovskite-Based Electrochemical Cells for Stable Solar Water Splitting: Achievements, Opportunities, and Prospects.
Adv Mater
September 2025
Department of Materials Science and Engineering, Yonsei University, Seoul, 03722, Republic of Korea.
Recently, halide perovskite materials have attracted significant research interest in photoelectrochemical cells as promising photoabsorbers due to their superior optoelectronic properties. However, their instability under environmental conditions remains a major obstacle to the development of stable water-splitting devices. This review thoroughly examines the growing array of encapsulation strategies that have accelerated the integration of perovskite materials into water-splitting systems.
View Article and Find Full Text PDFLevetiracetam-Assisted Perovskite Crystallization and Tripartite Lead Iodide Reduction in Perovskite Solar Cells.
Adv Mater
September 2025
Key Lab of Artificial Micro- and Nano-Structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.
Sequential deposition technique is widely used to fabricate perovskite films with large grain size in perovskite solar cells (PSCs). Residual lead halide (PbI) in the perovskite film tends to be decomposed into metallic lead (Pb) under long-term heating or light soaking. Here, a chiral levetiracetam (LEV) dopant containing α-amide and pyrrolidone groups is introduced into the PbI precursor solution.
View Article and Find Full Text PDFMolecular Hybrid Bridging for Efficient and Stable Inverted Perovskite Solar Cells without a Pre-Deposited Hole Transporting Layer.
Adv Mater
September 2025
Guangdong Provincial Key Laboratory of Optical Information Materials and Technology & Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou, 510006, P. R. China.
Establishing a low-resistance perovskite/ITO contact using self-assembled molecules (SAMs) is crucial for efficient hole transport in perovskite solar cells (PSCs) without a pre-deposited hole-transporting layer. However, SAMs at the buried interface often encounter issues like nonuniform distribution and molecular aggregation during the extrusion process, leading to significant energy loss. Herein, a molecular hybrid bridging strategy by incorporating a novel small molecule is proposed, (2-aminothiazole-4-yl)acetic acid (ATAA), featuring a thiazole ring and carboxylic acid group, along with the commonly used SAM, 4-(2,7-dibromo-9,9-dimethylacridin-10(9H)-yl)butyl)phosphonic acid (DMAcPA), into the perovskite precursor to synergistically optimize the buried interface.
View Article and Find Full Text PDFComprehensive Analysis for Low-Cost and Highly Efficient Perovskite Solar Cells Using SCAPS-1D with an Inexpensive Hole Transport Material, Electron Transport Material, and Back Contact Considering the Toxicity.
ACS Omega
September 2025
Dept. of Electrical and Electronic Engineering, Noakhali Science and Technology University, Noakhali 3814, Bangladesh.
Perovskite solar cells (PSCs) are rapidly advancing due to their high power conversion efficiencies (PCEs) and low fabrication costs. However, their commercialization is hindered by lead toxicity and the use of expensive materials, such as Spiro-OMeTAD and gold electrodes. This study presents a comprehensive SCAPS-1D simulation-based analysis of 14 perovskite absorber materials, spanning both Pb-based and lead-free compounds, under a unified device architecture using low-cost, nontoxic components: ZnO as the electron transport material (ETM), PEDOT:PSS + WO as a dual hole transport material, and nickel as the back contact.
View Article and Find Full Text PDF