98%
921
2 minutes
20
Amyloid β (Aβ) peptides are the main constituents of Alzheimer's amyloid plaques in the brain. Here we report how the unique microfluidic flows exerted by droplets sitting on superhydrophobic surfaces can influence the aggregation mechanisms of several Aβ fragments by boosting their fibril self-assembly. Aβ(25-35), Aβ(1-40), and Aβ(12-28) were dried both on flat hydrophilic surfaces (contact angle (CA) = 37.3°) and on nanostructured superhydrophobic ones (CA = 175.8°). By embedding nanoroughened surfaces on top of highly X-ray transparent Si3N4 membranes, it was possible to probe the solid residues by raster-scan synchrotron radiation X-ray microdiffraction (μXRD). As compared to residues obtained on flat Si3N4 membranes, a general enhancement of fibrillar material was detected for all Aβ fragments dried on superhydrophobic surfaces, with a particular emphasis on the shorter ones. Indeed, both Aβ(25-35) and Aβ(12-28) showed a marked crystalline cross-β phase with varying fiber textures. The homogeneous evaporation rate provided by these nanostructured supports, and the possibility to use transparent membranes, can open a wide range of in situ X-ray and spectroscopic characterizations of amyloidal peptides involved in neurodegenerative diseases and for the fabrication of amyloid-based nanodevices.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.5b06219 | DOI Listing |
Nanoscale
September 2025
School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China.
Metal matrix composites are widely employed in aerospace and marine engineering due to their excellent mechanical properties and chemical stability. However, their surfaces remain vulnerable to corrosion, icing, and mechanical wear, severely compromising long-term reliability in harsh environments. Inspired by natural superhydrophobic surfaces such as lotus leaves, functional interfaces with high water repellency and interfacial stability can be engineered through the synergistic design of hierarchical micro/nanostructures and low-surface-energy chemical modifications.
View Article and Find Full Text PDFLangmuir
September 2025
SERB Sponsered Microfluidics Laboratory, Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal 700032, India.
This study investigates the dynamic behavior of water droplets impacting a superhydrophobic surface (SHS) at low Weber numbers ( < 17). SHS is fabricated by a chemical coating process on magnesium AZ31 alloy. The surfaces exhibit a Cassie-Baxter wetting state, showing a contact angle of approximately 155°on the surfaces.
View Article and Find Full Text PDFLangmuir
September 2025
Institute of Technology for Carbon Neutralization, Yangzhou University, Yangzhou 225127, Jiangsu, China.
To expand the application scope of carbon steel, imparting superhydrophobicity to its surface offers an effective strategy to overcome its inherently poor corrosion resistance. However, in marine environments, conventional superhydrophobic coatings often suffer from limited mechanical durability and inadequate long-term corrosion protection. In this study, a durable superhydrophobic bilayer coating composed of PDMS-MWCNTs (top layer) and PDMS (bottom layer) was developed to address these challenges.
View Article and Find Full Text PDFSmall
September 2025
Institute of Interfaces and Particle Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Cauerstrasse 4, 91058, Erlangen, Germany.
Repellent surfaces provide resistance to biofouling, ice formation, bacteria adhesion, or corrosion. Inspired by the hierarchical structure of the lotus leaf, such surfaces minimize water adhesion through micro- and nanostructuring. Conventional fabrication methods to mimic the lotus leaf often involve problematic fluorinated compounds, sophisticated preparation conditions, or lack mechanical robustness.
View Article and Find Full Text PDFACS Appl Bio Mater
September 2025
School of Textile Science and Engineering, Jiangnan University, Wuxi 214122, Jiangsu, China.
The problem of hospital-acquired infections arising from inadequate antimicrobial and antibiofilm performance in medical textiles is an increasingly urgent threat to public health. The dual strategy combining superhydrophobic surfaces with aPDT exhibits potent antibacterial efficacy and barely triggers the risk of antimicrobial resistance, but still encounters significant challenges, including intricate fabrication methods and narrow spectral absorption of single-photosensitizer (PS) systems. A superhydrophobic-photodynamic dual antimicrobial polyester fabric is developed herein for medical applications to address these challenges.
View Article and Find Full Text PDF